Hi Chris and all. Your adjustment with the hand collet is very informative and accurate especially to newcomers that didn't know this adjustment.
@Chrisclockrepair
2 жыл бұрын
Thank you Paul. I should clarify that this is an adjustment that gets made on modern clocks.
@lyndiecallan2911
Жыл бұрын
Chris, I have a beautiful grandmother clock that has been in my family for over a century. Today, by chance, I was waiting on the clock repairman and stumbled across your videos. I think you have solved my problem and saved me a lot of money. Many thanks!
@Chrisclockrepair
Жыл бұрын
Fantastic!
@nathansuddarth9595
6 ай бұрын
Thank you it works great now. God is so good to have you help me.
@ianwarner8894
Жыл бұрын
You kindly referred me to this video as my Westminster clock chime was slightly out of sync, running approximately 4 minutes out. Your easy to follow instructions made the job so much less daunting and now my clock is bang on, thank you again for your help and please keep up the great work that you do, it is priceless to me and the masses who are not so clued up when it comes to all things clocks. 👍🏻🙏🏻
@Chrisclockrepair
Жыл бұрын
Thats fantastic
@sputnik4216
Жыл бұрын
Aha! So THAT's why my clock chimes perfectly in sync w/numbers! .. hahah. just kidding. Great Tip, didn't know that bushing was adjustable. Thanks! 👍 👍
@Chrisclockrepair
5 ай бұрын
You're welcome.
@pazu6215
2 ай бұрын
Thank you sir! Helped fix my issued right away! I first checked with chatGPT but it was beating around the bush, checked your video and had the answer in 60 seconds!
@mhtube01
3 ай бұрын
Great video! I had no idea it was thar simple. I just used this repair on my Pearl grandfather clock that was chiming a tad late. It's dead on now! Thank you!
@joefreeman6346
2 жыл бұрын
Chris, Your videos are perfectly done. I like how your so composed and not shy. Great work and love these videos.
@Chrisclockrepair
2 жыл бұрын
I appreciate that Joe!
@thehistoryguy5045
8 ай бұрын
Great video! Helped me fix a bracket clock I picked up. Many thanks
@Chrisclockrepair
8 ай бұрын
Boom!
@tommyhiggins1279
Жыл бұрын
CHRIS BRILLIANT VID.MY CLOCK STRIKES 10 MINUTES BEFORE THE HOUR AND A HALFPAST AS WELL.
@sonofthunder.
9 ай бұрын
thanks,have a old new england wall clock since i was a child,and this helped me correct the hands to chime right
@Chrisclockrepair
8 ай бұрын
Fantastic
@blitz_zen
5 ай бұрын
Thanks Chris!!
@Chrisclockrepair
5 ай бұрын
Absolutely!
@theclockcollector7967
Жыл бұрын
thank you very mutch my mauthe clock is now chiming correctly again
@Chrisclockrepair
Жыл бұрын
Fantastic!
@sirridok
2 ай бұрын
Thank you!
@jeremiahbacon3651
2 жыл бұрын
finially someone knows about manley pliers they are the best!
@lisaschroeder3390
2 жыл бұрын
Love the video. This is a useful tip 👍
@Chrisclockrepair
2 жыл бұрын
Thank you!
@gpdewitt
2 жыл бұрын
Video suggestion: comprehensive adjustment of a pendulum escapement from scratch.
@machielschouten8647
10 ай бұрын
Very nice vid although my method is a little different to yours. Instead of using pliers to turn the bushing I use the tapered squar back end of a cutting broach to push the bushing of the hand on. ( broach fastened in a vice ) You will then have two hands to support the hand ( no pun intended ) to turn it.
@Chrisclockrepair
9 ай бұрын
Actually that is also how i do it, but this video is designed for someone to be able to do it without “special” tools.
@hyperreed
4 ай бұрын
Great video. My second hand has some wiggle room causing my clock be behind when the hand is on the left side and a bit fast when on the right due to the weight of the hand. Can this be tightened?
@jenjirajaimunk6381
5 ай бұрын
Hi Christ. Thank you very much for the vdo. However, I am wondering what the two holes in the front are for? Cheers!
@Chrisclockrepair
5 ай бұрын
Winding the clock strike and time trains
@kathysimpson4063
Жыл бұрын
How do you adjust a loose bushing? Did you do a video on it?
@genelitza9157
Жыл бұрын
Hi Chris,, I purchases a Hicarer 2-1/8" clock .. Any ideas on how to adjust time?? There is 1 silver button thay i pushed to start clock . nothing else on side oor back. lence does not open. thanks Gene
@Chrisclockrepair
Жыл бұрын
Sorry, I’m not familiar with that timepiece
@happydays0220
Жыл бұрын
👍
@Chrisclockrepair
5 ай бұрын
Thanks.
@loribecchi8819
Жыл бұрын
My Howard Miller grandfather clock strikes the wrong number of times. I tried moving hour hand to the time it struck then back again to correct time. It worked till 9pm.I set it around 2 pm.At 9 it struck 8 times,same thing at 10,then it started backing up to 8 times,then 7.Now this morning at 6,7 and 8 it was right. It was wrong at 9 am and at 10,11 and 12. Then at 1 pm it struck once,which is right.What's up with i?. Never right since daylight savings time and we had to spring ahead! Can you help? We seem so close to fixing it.
@Chrisclockrepair
5 ай бұрын
It sounds like the rack may be catching on something or not falling correctly onto the snail. You will have to watch the movement in operation to see what is causing the difference in the number of strikes. You can do this by removing the dial.
@stanleyknife3268
2 жыл бұрын
It depends how the hand is made. What you are showing is a reproduction clock which are made in a different way and most are crap. For a person who doesn't know they are more likely to end up breaking their clock hands.
@Go2Sleep911
2 жыл бұрын
He even says for a rack and snail movement
@stanleyknife3268
2 жыл бұрын
@@Go2Sleep911 I watch many terrible videos on here about so called advice on clock repairs, some should never go near a clock. I have around 30 years as a clock maker so I know what i'm talking about.
@Go2Sleep911
2 жыл бұрын
@@stanleyknife3268 so you saying this guy doesn’t know what he’s talking about? 👌 if you have “so much experience” why are you looking at clock repair videos on KZitem 😂
@stanleyknife3268
2 жыл бұрын
@@Go2Sleep911 Because I'm a retired watch and clock maker who used to specialise in high quality repairs and restorations.
@Go2Sleep911
2 жыл бұрын
@@stanleyknife3268 cool you should start your own channel
@MySpanky17
3 ай бұрын
I moved the hour hand. Now what?
@closencounter1000
6 ай бұрын
What if it doesn't have a bushing ? Strikes 3 minutes late. Thanks.
@Chrisclockrepair
5 ай бұрын
Then you are probably dealing with an antique clock and it requires a more technical adjustment on the inside of the movement, which I don't have a video to feature that as of yet.
@closencounter1000
5 ай бұрын
@@Chrisclockrepair I think it is the star wheel they has to be slightly turned.
@Chrisclockrepair
5 ай бұрын
The star wheel adjusts the run of the lift of the strike; it doesn't determine when the clock begins the striking sequence.
@christophercocklin835
4 ай бұрын
My clock stricks the hours correctly but at half hour late.. ie at 6.30 it chimes 6 times. It has three key winding ports. It chimes correctly ? Every 15 minutes, keeps good time, just the hour chime is 30 mins late... Can this be reset at home ?? Thanks Chris .. uk 🇬🇧
@markstone7142
Ай бұрын
Just undo the hand nut (or take out the pin holding the hand) and replace it at 180 degrees to where it was. Replace the hand nut (or pin).
@docholliday.
2 жыл бұрын
Chris, I have a very old grandfather clock that doesn’t have the part of the hand that allows for adjustment. Is there a way to modify it?
@Chrisclockrepair
2 жыл бұрын
No. If it is antique clock, this adjustment will not work.
@susanlawlor3729
Жыл бұрын
I removed the nut and there is no bushing attached on the back of the second hand!? Now what. ? It’s chiming 3 minutes after it should.mantle clock Ingraham. Thank you.
@Chrisclockrepair
Жыл бұрын
That trick won’t work on your clock as it is a countwheel type movement. That’s not a beginner adjustment.
Пікірлер: 59