Nice video. Measurements are great, most customers would rather see the branding “in full” with minimal visual reductions. Placing that brand vinyl in the exact center obscured some lettering. A technique called “visual centering” reduces this loss of brand detail. Such as having to cut that small amount from the large lettering in the center and obliterating the small “r” in the word Air. It appears “unfinished”. Most of my customers would have complained and that would have been money out of my pocket on a re-apply. On larger graphics the use of air release vinyls, though it costs a little more, aids greatly in reducing large bubbles. I don’t completely pull the transfer paper until I try and work out as many large bubbles as possible I see. That is the forgiving thing about air release vinyl. Nice Clean work, really clean work. 👍🏻👍🏻👍🏻
@ukaszbanasiak4787
2 жыл бұрын
That's absolutely right. I was trying to go with exact geometry my whole life. Finally, an artist told me that it is not about the numbers but about how the whole picture looks. I would transfer the decal slightly to the right to make the slit pass between the letters.
@gaming4K
Жыл бұрын
That's what i do when i desing stuff i rather slightly move something if it looks better as a whole.
@phant0
Жыл бұрын
Great tutorial! You should fix the audio though. The left channel gets randomly muffled and it creates an extremely unpleasant effect if you're wearing headphones.
@BalloonSchool
2 жыл бұрын
Missing a "s"? Thanks for explaining but you should think about a better microphone option! Would it make not more sense to put the whole sheet 1 inch to the right side to have just "1 cut letter" instead of 3? I really thank you for all your tips and sharing your time with us :)
@djrikk214
6 жыл бұрын
Was the mic being submerged periodically? Please tell me you strangled your camera man after the recording. Otherwise, great demonstration!
@jeffgilbert7302
2 жыл бұрын
Watched this a few times. I did this for my first time and came out great. Thank you sir!
@HarrisDecals
7 жыл бұрын
We like the thicker version of TransferRite Tape. Holds the lettering together better.
@tedlumley4470
4 жыл бұрын
I prefer to cut the door gap with the premask on. Makes for a nicer cut.
@JustMitchPool
5 жыл бұрын
Could you do a video where newbies may go wrong with mistakes and how to fix them correctly. Thank you. Great tutorial.
@HarrisDecals
5 жыл бұрын
We will try and put one of those together.
@romusicofficialph7951
2 жыл бұрын
I am also a sticker applicator, but we have different techniques, sorry to say the this technique create bubbles. He should streched the sticker while running esqueegee to avoid bubbles.
@shanehutchinson6350
3 жыл бұрын
This is insane. For anyone watching, let me tell you he TOOK HIS TIME. This is a 2 minute install in reality.
@james_harcombe
3 жыл бұрын
Do you think maybe he was going slow for peeps like me who are trying to learn a little something!
@wheretonow3106
2 жыл бұрын
@@james_harcombe Not sure if i'll get any sleep tonight contemplating that statement.
@judichristopher4604
Жыл бұрын
EXCELLENT VIDEO I used to do the lettering for a company back in 2002... working on a $7000. computer... Now it seems like everyone can do this sort of thing... I miss designing and cutting out the decals. Do you just sale the Decals (* I know how to put it on a board) I am getting ready to move back to Albuquerque, New Mexico (US)... I hand painted my last 4' x 8' sign... took way too long... it looked beautiful... but I'd like to do Vinyl this time... Thank you for sharing this video.
@geoffreymgray
4 жыл бұрын
Do you have a certain brand of transfer tape you like? Do you have another video of how you layered the different colors in during the weeding process? (I usually apply to vehicle in layers by color and use registration marks) I never thought of the magnets, great idea!
@ashleycorr
7 ай бұрын
Great job. I couldn't help noticing the BIGGERSTAFF at the top, yet BIGGERSTAFFS in the domain name.
@RussellBond13
6 жыл бұрын
If you moved it 1/2" to the right you wouldn't have to cut the R's
@investalain5804
6 жыл бұрын
exactly
@stephenmorrisonii855
5 жыл бұрын
I'dove it slightly to the left....Better not to cut into the smaller letters on Air Coditioning. The big "R" has a lot more vinyl and will hold better when you curl it around behind the edge.
@paulverling3758
4 жыл бұрын
AI conditioning?, skynet.... thought you could hide in your little transit van... I see you coming.
@bradbutler8781
Жыл бұрын
Yeah I agree with Duane, I would have avoided the gap a bit better than that. preferably during the design process or while installing.
@captain0sam
4 жыл бұрын
Audio is fine, great tutorial 🙏
@SignManJoe
Жыл бұрын
1/4" to the right and no loss on the "r" in Air and also the top "r" in bigger. Use your eyes. Don't always rely on measurements.
@garethwest509
5 ай бұрын
This has just helped me so much, thank you sir!!!
@imagitrax8392
4 жыл бұрын
Using headphones with these scare me
@Tencentsboys
4 жыл бұрын
dropping some GEMS! excellent work. one of the best large panel hinge installs on KZitem
@sukaiburu1
7 жыл бұрын
Whats wrong with the audio?
@GodFamilyCountryOfficial
6 жыл бұрын
Guy holding the camera was muffling the mic.
@bobbystover209
4 жыл бұрын
I don't see any wrong !
@blackjack444....
4 жыл бұрын
I thought I was having a stroke!! 🤦♀️
@chasingwaves11
4 жыл бұрын
Bobby Stover you cannot see it you have to listen 👂 .. this audio was driving me nuts!! Use a lab mic or a boom mic next time.
@on3td
3 жыл бұрын
Mic underneath his shirt. When he goes up and down with his arm he's pushing the mic in his body
@michaelphillips-nxs
4 жыл бұрын
wax pencil works great, wipes right off
@Bernievids
4 жыл бұрын
Just wants to show off his cool ass magnets, rich M F ha ha !
@TheVal770
6 жыл бұрын
What's with the 2x www. on the window panel????
@johnfowler5248
4 жыл бұрын
Thank you for making this video It was very helpful. Now I can put on my new Neil Peart decal!
@ronmor8237
5 ай бұрын
Thanks for the help and info!! Pro!
@Cfass1
5 жыл бұрын
I have two cheeseburgers large fry and a large Coke easy ice
@BrettHoustonTube
3 жыл бұрын
Great job. Thanks for sharing the info !
@theTAILlor
4 жыл бұрын
How much would something like that cost?
@ImBiancaDee
3 жыл бұрын
This was very helpful!
@potatosalad5355
3 жыл бұрын
I am don't understand why the 90% of the "seasoned pro" vinyl decal installer, RUBBING whit the Squeegee ALL the transfer paper? There is no reason to do it! That complicates and make more hard the removal the transfer. Only squeegee over the letters, graphics and others...
@nashenasashenas6042
4 жыл бұрын
The audio made me sick!
@jozzorama
4 жыл бұрын
I thougt i was having a stroke.... :S
@mileswilliams5091
2 жыл бұрын
It was fine untill I read your comment 😂
@yourunclesam6780
6 жыл бұрын
Nice Job Harris.I like it.What kind ( specciality or any number?) Vinyl are you usingThank you
@theeuropeancyclepaths8206
4 жыл бұрын
Good tutorial. Thanks 👍
@cruz47144
4 ай бұрын
Thanks for the tips
@marcteigh8633
2 жыл бұрын
Ai' conditioning - Hmmm. I'm perhaps just being picky but loosing most of a letter on the door gap would not really be what I wanted. Sure people would work out what it meant - but I would be worried that people would assume my attention to detail on THEIR project was going to be no better than I tolerated on MY van. Useful info though, thank you.
@Silerlonewolf1970
3 жыл бұрын
Best install video thank you Sir
@karlmayes7412
Жыл бұрын
Spot on 💯 percent cheers.
@davidtyalcin
2 жыл бұрын
Would make more sense for that brand to put Biggerstaffs lettering on top instead of Biggerstaff(missing s) as both letter says Biggerstaffs at the bottom lol
@kathybutcher7794
5 жыл бұрын
Can you apply decals in cold weather???
@HarrisDecals
5 жыл бұрын
No. For the adhesive to adhere properly you need to do it in 60+ degree weather.
@mikeledee8786
3 ай бұрын
Are you using paper or vinyl transfer tape?
@elitegraphx6362
3 жыл бұрын
This is so much easier wet installing you won’t have a single bubble
@nayabrii
3 жыл бұрын
What type of Vinyl you guys use ?
@PeepzIsHere
3 жыл бұрын
Do you have a video on how to apply the larger size decals like those on the side of the vehicle? I have a vehicle I will be apply large 18"x5' solid decals to that I won't be able to slice through.
@MrKeving1
5 жыл бұрын
Nice job thanks
@HarrisDecals
5 жыл бұрын
We hope the video helped give you an idea on how to get the job done
@JohnHenry2420
6 жыл бұрын
Mark your work and the vehicle and install it wet and your finished in half the time. The only time I ever install with hinges is on glass.
@edwinveneman
5 жыл бұрын
Wet? 😂 If you don’t know how to attach then you make it wet! I can do this dry in 3 minutes!
@carolmitchell4281
2 жыл бұрын
your right hand door as i"m looking at it is slightly to high
@estherluis4946
3 жыл бұрын
If you have nothing nice to say my God. Go fly a kite the man did an excellent job.
@uarepresentative8524
7 жыл бұрын
Very nice video. Thanks.
@flyone8350
Жыл бұрын
Do you make and sell those for a 2004 Ford Ranger tailgate?
@CKHO-ju8up
Жыл бұрын
Why small bubble will be gone by itself in a month?
@andretopy
6 жыл бұрын
The camera guy accidentally squeegeed vinyl on the mic and didn't have a helper for a big job
@DebbieTomkoSUNSHINE
2 жыл бұрын
What is your opinion on water application?
@kevinneaceful
3 жыл бұрын
Great job
@frankmillerjr7631
7 жыл бұрын
he needs a new camera guy
@inspiringminds6822
5 жыл бұрын
I'm having tons of issues cutting and weeding 651 vinyl any advice?
@HarrisDecals
5 жыл бұрын
We use a lot of 651 for race cars. I am not sure what type of plotter you are trying to use, but we spend a lot of time making sure that we have the right depth and the correct amount of blade showing. Once you have those two right, very easy to work with.
@inspiringminds6822
5 жыл бұрын
Thanks @@HarrisDecals
@LukeOxleyPK
4 жыл бұрын
Do you prep the vehicles paintwork before application?
@NickD511
3 жыл бұрын
You must clean the vehicle thoroughly. And pay special attention to edges rubber seals and back sides of door opening. They can harbor grease, dirt and road grime. Even if it’s a brand new vehicle. Clean it with soap like joy. And water. Dry. Then 91% rubbing Alcohol as a final step. Based on how involved the car washing was. You may have to let dry overnight. Do a final wipe down of rubbing alcohol right before you install the graphic. And use a microfiber lent free towels.
@ChristianLott28
4 жыл бұрын
Plenty of mistakes here. You folded it to get your Centre mark, how were you certain the application tape was evenly cut at either end from the actual graphic? You left no tape at the ends for reference so you could've gone up or down when you pulled the graphic to the ends. You should've taped through the middle that way it's not moving, rather than taping at the top on one end, that's just silly
@talkingcargojunkremoval
3 жыл бұрын
Nigga we know that you're a Ruff Ryder homie. Even if you don't know what you're talking about, it sure sounds like you do. 👍👍👍💪💪💪😎😎😎
@smo9090
15 күн бұрын
You match up the vinyl not the tape. Never go by tape. You can see the vinyl thru the tape
@ChristianLott28
15 күн бұрын
@@smo9090I have no idea what you mean
@smo9090
15 күн бұрын
He didn’t match up the ends of the transfer paper. He matched up the two ends of vinyl. Then folded to make the center mark. Very common way to get your center.
@smo9090
15 күн бұрын
I do agree he should have secured the art more though. It can move too easily with that little bit of tape.
@jpsdesign1
7 жыл бұрын
very helpful. thanks for sharing
@HarrisDecals
7 жыл бұрын
Thanks!
@zigfridtijunelis616
4 жыл бұрын
Hello. Check this out - our online catalog of professional tools for signmakers and car wrappers - online.fliphtml5.com/kxtfb/agir/ - Quality made in Germany, sold in your backyard 🇨🇦
@creercreo
4 жыл бұрын
Muchas gracias amigo
@eusebiocal3448
3 жыл бұрын
Are you using rapid air, air release vinyl ?
@alexherman1987
2 жыл бұрын
What kind of vinyl is that? Thank you
@phinsmagic
3 жыл бұрын
The little “r” in air conditioning would drive me nuts
@robertmenger3230
Жыл бұрын
No water spray?
@ok-tq8gp
3 жыл бұрын
man really just used scissors
@leftblank6036
4 жыл бұрын
i would have done the centre between the e and r
@alextechworks
4 ай бұрын
What transfer tape do you use?
@mccullumdamps5785
2 жыл бұрын
5:09 how do you it’s straight line while you holding from other hand
@nickharwell9909
5 жыл бұрын
did i miss the wet sticking part? how come he didnt wet stick it?
@HarrisDecals
5 жыл бұрын
Good question. We do not we apply anything. For 1.) more time consuming 2.) voids some mfr warranties
@sanssucre9780
Жыл бұрын
the tuto is really cool, but the sound is so ugly. The mic is not pulled properly I think
@kevinerickson2595
6 жыл бұрын
Pro audio muffel 🙉
@michelleluz6584
7 жыл бұрын
what kind of vinyl are you guys using? thank you
@HarrisDecals
7 жыл бұрын
If I remember right this is a combination of Arlon and Oracal high performance vinyl.
@ClipzCutz20
2 жыл бұрын
What application tape are you using?
@timharris7303
6 жыл бұрын
Do you have a place were I can order one of those t-shirts?
@jasonenz4238
6 жыл бұрын
How do you like the BROWN auto? I talked to the rep at ISS...seems like a decent press. Thanks for the great video :)
@jdvater3761
5 жыл бұрын
That guide tape on the left was useless.
@DaveInBridport
2 жыл бұрын
How did you get 2 colours of vinyl on one piece of tfr paper?
@personalguntrainer
2 жыл бұрын
Just look up how to do 2 color vinyl decals. Towards the end of the video, when they get to the transfer tape, you'll understand better than what I could write in this comment box.
@remcovanhal6336
3 жыл бұрын
I'lI feel very sad for thar R in 'air' though :(
@gamingkizz2842
4 жыл бұрын
Can you put them on utv
@Mustang_eddie
7 жыл бұрын
What type of transfer tape?
@HarrisDecals
7 жыл бұрын
TransferRite
@Mustang_eddie
7 жыл бұрын
Harris Decals do you know which model? I currently have two types of transferrite. One is too sticky and the other is too weak. Thanks.
@HarrisDecals
7 жыл бұрын
We use 782U
@davec8117
Жыл бұрын
I hope they didn't list the email address twice right on top of each other. That would look ridiculous.
@vadymk759
7 жыл бұрын
Why not wet installation? With wet, you would not have any bubbles.
@HarrisDecals
7 жыл бұрын
Thanks for the comment. We have never done wet installs because you need to wait at least 24 hours before pulling the transfer tape back for warranty. We don't have time for that. Bubbles go away within 30 days. People doing person project where they don't apply vinyl every day and have the time to wait it would be great.
@vadymk759
7 жыл бұрын
thanks, it makes sense
@sxstringdad
6 жыл бұрын
With the right water to soap ratio there may be a 10 minute waiting period with a final squeege with ZERO bubbles and no warranty issues(complaints)for vinyl. Really depends on the graphic material,job and experience level but it can be done quickly with vinyl, no issues. I've been doing it for 12 years. Never had warranty issues. 1080 is done dry or any air release type graphic is done dry.
@ericduncan7906
6 жыл бұрын
Also I bet these are air egress films, no need for water
@jasonjones4591
6 жыл бұрын
Most likely not an air egress on solid color cut vinyl
@MrNenemott
7 жыл бұрын
what font is that, it is beautiful
@daniellemarie629
5 жыл бұрын
It looks custom. Closest thing might be Bodoni although it doesn't have quite as much quirkiness as this. Domani might be a good substitute.
@MrAngel-ir2lj
2 жыл бұрын
Where are you guys located?
@HarrisDecals
2 жыл бұрын
Lincoln Nebraska.
@MrAngel-ir2lj
2 жыл бұрын
@@HarrisDecals dam I wish you guys where much closer
@HarrisDecals
2 жыл бұрын
@@MrAngel-ir2lj where are you located?
@kathyfann
5 жыл бұрын
Where do we purchase these?
@HarrisDecals
5 жыл бұрын
Kathy if you are referring to the graphics, you can order your own large custom decals on our website www.harrisdecals.com
@cahayagogreen2565
5 жыл бұрын
Hi sir pls sent the which type of sticker name
@xdesigncreativ8549
6 жыл бұрын
That's not the good technic to apply :/
@timaosborn
5 жыл бұрын
Right!
@zigfridtijunelis616
4 жыл бұрын
Hello. Check this out - our online catalogue of professional tools for signmakers and car wrappers - online.fliphtml5.com/kxtfb/agir/ - Quality made in Germany, sold in your backyard 🇨🇦
@MrMnj1193
4 жыл бұрын
I would fire that audio guy...
@clausm1508
5 жыл бұрын
Champion. :)
@kingdomheist5964
4 жыл бұрын
😂
@meadearble4949
5 жыл бұрын
Wait! What?
@kingdomheist5964
4 жыл бұрын
I hope this is not an actual business... Im a professional wrapper & well I almost died and nearly def watching this lol
@gordonenquist36
4 жыл бұрын
I gave this a thumbs down, NOT for your install, but for the graphic designers back at the computer. This is a big graphic, meant to be informative while parked or in traffic. The van surface is a given, use it. The biz name letters could have been better spaced (kerning) to avoid spanning the door crack. Also the features: plumbing, heating, air conditioning, could have been stacked in a larger font size for more emphasis.
@BlazshoNikolov
5 жыл бұрын
THE SOUND ! THAT SH*** MICROPHONE! .... ..... How the hell did you posted it like that?! ... And why the heck did you cut "rs" ..? Those 2 mm nobody can see.
Пікірлер: 176