Thanks for the quick tutorial! I'm building my first pc and I'm feeling a little overwhelmed, so videos like this that get straight to the point are a godsend.
@BABBLEBOAR
4 ай бұрын
thank you for walking me through this. Very clear and easy to follow, helped me a ton!
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@skivvywaver
4 ай бұрын
I have started applying it to the heatsink. A thin layer and then install the cooler. It works better for me than the 1000 other ways I've tried. Give props to the heatsinks they send with new processors for the idea. I just copied it.
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@CutieCallie
Ай бұрын
My pc keeps restarting at random, but usually while I’m playing a game. I bought my pc two weeks ago and was told by a friend that it probably doesn’t have thermal paste since I bought it pre-built. I’m not tech savvy, but I’m going to try to apply thermal paste myself. I hope it helps. Thank you for your video!
@gus051
Ай бұрын
Did it help?
@wizewizard4756
4 ай бұрын
Thanks for the guide! I'm swapping everything to a new mobo so I wanted to make sure I was applying the paste properly, worked like a charm.
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@DarkStorm909
2 ай бұрын
Straight to the point and detailed. Thanks for the great tutorial.
@adamantine001
6 күн бұрын
I had to do it twice, first attempt was way too little paste, and of course the temps are abysmal 😂 The second attempt, I put a bit more and temp is 11°C cooler. I use the spatula method. Thanks for the guide 👍
@lesmonkmorison2828
2 күн бұрын
spatula method is the best
@JangoAC
2 ай бұрын
I am hyped to do this!
@RitlalYaso-b9h
14 күн бұрын
Thermal grease is a very important auxiliary accessories, can bring more high performance for the CPU to play, I recommend MJ M12 thermal grease, its performance and price are very advantageous, better than MX-4!
@HowardARoark
Ай бұрын
Great, very helpful.
@avirtualworld4U
3 күн бұрын
Method #2 the pea is what I have always used = No air entrapment easier install and after a year or so taking the cooler off it has always been evenly spread. But I have seen these Graphene sheets with their results showing great effectiveness I want more info on the Graphene sheets might just be the thing? They don't need changing ever or a long time.
@jcny08
Ай бұрын
Hey guy, what I do sometimes I place blue Painters tape around the cpu in a square formation and the place the paste, to avoid the spill over the edges with the paste when done just remove the Painters tape and it should be even, lol.
@ultronixyt7953
5 ай бұрын
NIce.... Could you please include more patterns P.S = btw i was just buying thermal paste for my new PC and saw your video on KZitem. thanks !
@TheBigBlueMarble
4 ай бұрын
Any other patterns have been shown to be less effective.
@TheBigBlueMarble
4 ай бұрын
All other patterns have been shown to be less effective.
@ultronixyt7953
4 ай бұрын
Thanks
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@SMGeezus
4 ай бұрын
I prefer using a cotton swap to remove the paste. That way you avoid scratching the cooler surface
@snatchednefkin
4 ай бұрын
Does microfiber scratch it?
@MalachiteDragon1
3 ай бұрын
@@snatchednefkin Probably way too late, but: A coffee filter will also work, it's got enough texture to remove the paste without being rough enough to scratch.
@mobileplayers5008
3 ай бұрын
Bruuh y don't u just suggested pour coffee onto ur CPU?
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@SMGeezus
2 ай бұрын
@@xler3441 no thanks. Piss off mate
@MrSmi31093
Күн бұрын
WANT A CLUE!!!!!!!!!!!!!!! DONT PUT PASTE ON THE CPU!!!!!!!!!! DUHHHH! PUT THE PASTE ON THE HEATSINK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@franciscofranco5739
Ай бұрын
Do they make a thermal paste that has RGB?
@rmorenberg
4 ай бұрын
nice video thanks
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@YouKnowWhatAmSayin
3 ай бұрын
What if my aio has pre applied thermal paste? Is it wrong to put some more on the cpu?
@MalachiteDragon1
3 ай бұрын
If it comes with paste pre-applied it's generally fine for everyday use, is my understanding
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@lesmonkmorison2828
2 күн бұрын
if ur a new bee.. forget about the second method as u WILL mess up the cooler pressure....just use the spatula
@onlytheashiest
3 ай бұрын
is the rubbing alcohol necessary? i dont know if i have any readily available
@carlitosskater89
3 ай бұрын
I would say: very very VERY advisable you do use isopropyl alcohol. It will clean your components and it will also evaporate naturally without leaving any residues.
@crazyassassin2551
Ай бұрын
What if I don't have alcohol 😢
@Elfili40
3 ай бұрын
The old thermal paste is burnt lmao
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@gio_playsl1128
2 ай бұрын
🫦👅😇
@Broken-1131
Ай бұрын
Amen 🙏🏽
@bruhhh69
29 күн бұрын
Prophet Jesus pbuh ❤
@Woahant.769
26 күн бұрын
My guy stfu this is a video abt how to apply thermal paste go on somewhere
@Xemioza
22 күн бұрын
Cut off the drugs m8
@fa.7s246
4 ай бұрын
Alcohol is illegal in my country is there an alternative?!
@golfkid333
4 ай бұрын
It's not drinking alcohol, go to pharmacy and ask for it, it's usually used to clean wounds
@lethalbroccoli01
4 ай бұрын
@fa.7s246 Do you live in a Islamic country? They really don't sell isopropyl alcohol? That seems like a health risk to not sell isopropyl.
@sajjidmuhammad4487
4 ай бұрын
@@lethalbroccoli01 Ive been to 3 islamic countries. And live in another. They all have isopropyl alcohol. Every single country in the world uses it for sterilization and all. Anyway if you dont want to use it then get Electric circuit cleaner. It does the job as well..
@guntarsleja
14 күн бұрын
@@sajjidmuhammad4487well buy desinfection but drink it cuz otherwise can’t get drunk
@MrSmi31093
Күн бұрын
DONT PUT LAYER!!!!!! PUT SMALL DAB IN THE MIDDLE DUHHHHHHH
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
@DarioushAryan
5 ай бұрын
bravoo
@guntarsleja
14 күн бұрын
Ti lox
@Spractral
4 ай бұрын
I really didn't trust the"pea" method.. but everyone seems to mention it. Of course lots of people say lots of things that aren't correct... Either way i don't trust it; even if it does appear evenly, how are you supposed to ensure that it goes to all the edges? That seems impossible to me.
@ECPUz
4 ай бұрын
It comes down to applying the right amount of paste. I've been using this method for over a decade without issue.
@Spractral
4 ай бұрын
@@ECPUz I just spread a layer with a thin guitar pick. I'm pretty certain it was done fine but who knows because I can't POST. I'm almost certain it's the BIOS; it's 5th gen Ryzen and the mobo ships with 3rd gen... But the stupid Asus website says they don't have any software available. I haven't changed a CPU in almost 20 years, since I was 14, but I'm sure I did it right.
@Spractral
4 ай бұрын
@@ECPUz do you have any advice ? I know the PSU, GPU etc work; all that I changed is the Mobo, RAM (since I was on ddr3) and CPU. I'm reasonably certain that I installed everything properly and that the issue isn't the hardware of the mobo or CPU ... It could be the one stick of RAM but what I'm betting on is it's the bios firmware .. But I don't want to go down the rabbit hole of customer "service" ... Why the hell does the Asus site say they have no software for this mobo? The documentation is littered with them pushing the virtues of their bios flashback and related stuff... But then they don't have any. And no explanation as to why. I'll save my cynical rant , I'm just annoyed. But I figured it would atleast bring me into the BIOS, or an error screen, even if the BIOS firmware didn't support 5th gen.
@Spractral
4 ай бұрын
NVM I'm an idiot... I'm still annoyed at Asus for not having any software available though... I'm likely going to need/want that.
@spacey9707
Ай бұрын
tbh the chip of the CPU is in the middle, other than that, it's just playing safe
@xler3441
2 ай бұрын
Jesus loves you so much and He is waiting for you with open arms, please accept Him in your heart and life while He is near
Пікірлер: 65