If you guys like this video and this video helped you fro your printer, help me grow my channel by subscribing :D :D And please share this video and tell you friends too maybe they also wanna subscribe too! Thank you all! Let me know how can I improve my videos in the future. Feel free to comment down below!
@JustMKollum
6 жыл бұрын
Hello! You are a life saver when it comes to assembling the printer! However, I can't seem to get the filament to go through at all. I made sure the extruder was heated at it's maximum temperature for PLA filament. When I hit the "Auto Feed In" button, it takes the strand of filament through the gears, but stops at the white extruder tube entrance. Then the gears start making a rapid ticking sound, indicating the filament is stuck and can't get through the white extruder tube. I tried using the filament it came with and all my 1.75mm filaments, no success. What should I do?
@3DPDoctor
6 жыл бұрын
Thank you man! I appreciate it. I just finished a video for how to unclog your nozzle. It seems like your nozzle is cloged or something is blocking the way. Keep tuned I will publish that video tonight. It will ahow you the way to fix it.
@JustMKollum
6 жыл бұрын
How can it be clogged? I just received the printer today and haven't printed anything with it.
@3DPDoctor
6 жыл бұрын
Maybe its bowden tube is kind of dislocated?
@3DPDoctor
6 жыл бұрын
Or did you straighten up the edge of your filament? Maybe its touching and getting stuck somewhere it suppose not to
@JustMKollum
6 жыл бұрын
Now that you told me to straighten the edge of my filament, the ticking stopped. But now I noticed that one of the feeding gears aren't moving at all. The one with the screw on it. I tried tightening and loosening it and it's not moving.
@monkeypajamas
6 жыл бұрын
Very nice video, i am having trouble printing files that i installed. But it prints with no problem the files that came in the memory card. Do you think you can make a video on setting up cura? Thanks
@3DPDoctor
6 жыл бұрын
Hi, i already did! I will render it today and upload it! Thanks for the request
@monkeypajamas
6 жыл бұрын
Awesome! Cant wait
@monkeypajamas
6 жыл бұрын
@@3DPDoctor btw did you run into this problem as well? I followed the instructions that came with this printer but it was no luck
@3DPDoctor
6 жыл бұрын
@@monkeypajamas no i didnt. Mine works very well
@monkeypajamas
6 жыл бұрын
@@3DPDoctor hi! So i found out what the pr9blem was. Apperantly it was the sd card. I tried it with another sd card and it worked with no problem.
@10ProduccionesPixel
5 жыл бұрын
Greetings. I just bought the Alfawaise u20 and I have newbie doubts in this machine. Do the pins or handles that lead to the warm bed, do not give any problem to touch the nozzle or affect the printing areas?
@3DPDoctor
5 жыл бұрын
Could you rephrase your question? I couldnt understand your point :(
@10ProduccionesPixel
5 жыл бұрын
@@3DPDoctor Lo siento mi ingles no es muy bueno. Las prensas que sostienen la base de vidrio de la cama caliente no perturban la boquilla.
@3DPDoctor
5 жыл бұрын
English?
@10ProduccionesPixel
5 жыл бұрын
@@3DPDoctor The presses that hold the glass base of the hot bed do not touch the nozzle.
@3DPDoctor
5 жыл бұрын
Ooo I see. So when you relase the springs underneath the heated bed, the nozzle is far away from the bed surface? How far? Too much? You should put washers under the springs. I have a video about it, I will release it soon
@whosanton248
4 жыл бұрын
Hi, where did you buy this printer?
@3DPDoctor
4 жыл бұрын
You can find the links down below. I got it from gearbest. Do you need new links?
@whosanton248
4 жыл бұрын
Osdoyi PhD thanks but I was just wondering did the shipping take long because I have seen some bad reviews of gear bests shipping.
@3DPDoctor
4 жыл бұрын
GuyFromFinland my package was arrived within 2 weeks but unless you select dhl it is sometimes being unlucky
@whosanton248
4 жыл бұрын
Osdoyi PhD ok thanks for respond fast :)
@zafersaygl1650
5 жыл бұрын
Merhabalar nereden aldınız acaba bende u30 almayı düşünüyorum
@3DPDoctor
5 жыл бұрын
Video aciklamasi kisminda linki biraktim. U30 icin yeni video yayinladim. O videonun altinda u30 icin link ve indirim bulabilirsin gearbest firmasindan
@zafersaygl1650
5 жыл бұрын
@@3DPDoctor Yanıt için çok teşekkür ederim. Öğrenciyim dolayısıyla fazla bütçem yok gümrük tahmini ne kadar çıkar ? Bu arada projelerinizi tebrik ederim hepsi mükemmel.
@3DPDoctor
5 жыл бұрын
Gumrul ucretini en son gearbest hallediyordu. Yine hallederler
@3DPDoctor
5 жыл бұрын
Tesekkurler
@zafersaygl1650
5 жыл бұрын
Gerek yanıtlarınız gerek videolarınız için çok teşekkür ederim. İngilizcenize ve Videolarınıza tekrardan hayranlığımı bildirmek isterim. Gece gece rahatsız ettim özür dilerim. İyi Akşamlar
@quentinaidan5760
5 жыл бұрын
Hello, i have a big issue on my Alfawise u20, my heated bed stays at 60+ degree and now 93°+ but it is not warming up
@3DPDoctor
5 жыл бұрын
Stays after print is done?
@M.4y
5 жыл бұрын
Can anyone help me with the alfawise U20. I just do not get it properly leveled. I tried everything 1 piece of paper and it does not work. The molten filament does not remain on the substrate.
@3DPDoctor
5 жыл бұрын
What do you mean by does not remain? Is there a too much gap between nozzle and surface?
@M.4y
5 жыл бұрын
@@3DPDoctor If the corners are equal, the center is too far away. The middle is not the same as the corners.
@3DPDoctor
5 жыл бұрын
Yes it happens because the bed holder red metal is weak and it bends. Try to decrease the gap as much as possible while keeping the distance. You will need to make the gap smaller at the corners so that center can be levelled.
@davestomper3428
6 жыл бұрын
What do you do when it doesn't turn on ???
@3DPDoctor
6 жыл бұрын
Did you check the power settings? There must be a side that tells you pwer setting 110v or 220v make sure that you have correct voltage depending on your country. Also dont forget to check your power cord. Also make sure that your wall have the power too. If it still doesnt respond, you might want to open the controller and check the switch or request replacement
@davestomper3428
6 жыл бұрын
Yes I did all of this except waiting on support right now to contact me
@3DPDoctor
6 жыл бұрын
@@davestomper3428 that is sad to hear :/
@nigelf8436
5 жыл бұрын
Don't buy it, mine arrived DOA and they refuse to do anything about it. They can prove the purchase they know there is a problem and the refuse to do anything about it.
Пікірлер: 60