The instructions lie. There is no way you are getting the screws in the bottom side of the table to connect the frame with just a screw driver. It would take forever. So now I have to run out again to buy a power drill that the instructions say not to use. They really need to drill holes in the back of the table to prevent this issue. Great video though
@ProAssembler
Жыл бұрын
Thanks for comment. Before buy a drill first use a small nail to make a hole then use screwdriver. I think you can finish it.let me know. Good luck 🤞
@yayamorgan3348
5 ай бұрын
Just bought this today. Thanks so much for the video. Life saver.
@ProAssembler
5 ай бұрын
Glad it was helpful. thanks for comment. PLZ subscribe and like.
@lmm7762
6 ай бұрын
Trying to put the legs of chairs on and it says use screw 1 for these and the Allen wrench but the stupid screw doesn’t fit!!! And my hand hurts from trying to! Omg help
@ProAssembler
6 ай бұрын
It's a little hard to start with, but then it will be easy to turn and your hand will need a week's rest. And God created the drill for the comfort of the people.
@doriscurry9500
2 ай бұрын
Hello I need to know what screws I need to put my table back together because I moved and can’t find the original ones please help me
@ProAssembler
2 ай бұрын
@@doriscurry9500 just table or table and chairs?
@tammyr.5203
2 жыл бұрын
I believe I may need replacement parts, none of parts for the table are connecting correctly. Thank for the help.
@ProAssembler
2 жыл бұрын
Hi Tammy. Thanks for your comment .I'm glad this video helped you. 😊 please share the channel with your friends on Social Networks and hit the like button.👍🏽👍🏽 kzitem.info
@jamieflores7815
3 жыл бұрын
does anybody know if i can put the table together with just a screwdriver...?
@ProAssembler
3 жыл бұрын
Hi Jamie.of course you can .Allen wrench is included so you just need screwdriver.
@jamieflores7815
3 жыл бұрын
@@ProAssembler thank you ! I had to hammer it in because the pre drilled holes didn’t align. My table was defective :(( and I say that cause none of the parts worked together... the chairs didn’t screw good it just ripped the cloth, and the metal on the table was bent upwards so I couldn’t screw it in sad sad
@loveanimals-0197
3 жыл бұрын
The damn circle marks don't align with the screwed metal legs at all. What the hell. 05:43.
@ProAssembler
3 жыл бұрын
Hi No matter Just adjust the bases with the wood screen .
@loveanimals-0197
3 жыл бұрын
for me, no matter how I adjust, they never align with the ring marks.
@coolmagazineonline272
2 жыл бұрын
Hello! I just received this item shipped to me. It didn't come with any tools or manual and the company will not send me the missing parts. Do you know what kind of bolts and screws I would need? I am in no way a carpenter lol
@christinac.6831
2 жыл бұрын
this helped so much! thank you :)
@ProAssembler
2 жыл бұрын
Hi Christina. Thanks for your comment .I'm glad this video helped you. 😊 please share the channel with your friends on Social Networks and hit the like button.👍🏽👍🏽 kzitem.info
@veerpatel4367
3 жыл бұрын
R the number 3 suppose to be hard
@TheOneanjel
2 жыл бұрын
if a screw is too hard to turn in, it usually means it's not lined up correctly, or that screw is not made correctly. Make sure you leave all screws slightly loose until all pieces are on, then tighten them all. this allows other parts to move slightly in order to align other parts being added.
@tenillestewart5370
Жыл бұрын
Does anyone know of a video that speaks ? I need more than this to understand what's going on. The instructions are only pictures too. I don't even know where to start. I found two videos including this one and they are both not very helpful for someone who actually doesn't build stuff on a regular.
@ProAssembler
Жыл бұрын
Hi there. I'm sorry to hear that. Unfortunately it was a copyright music background and I had to replace all sound with only music. I will try to made new one but any step try to pouse video and do it.
@tenillestewart5370
Жыл бұрын
@@ProAssembler I’m so sorry to come on your video and complain! I commend you for doing this because there are really barely any videos at all and I’m sure somebody else did learn how to do this easily… It’s just not how my brain works. I DID end up building two of the chairs yesterday and will continue to attempt to put the table together today thank you so much for the response! I was just very frustrated. 💕
@dejaneajefferson7768
3 жыл бұрын
Do I need a power drill. Because screw 6 doesn't screw into table ....
@ProAssembler
3 жыл бұрын
Hi Dej. you do not need drill. it just for doing fast. Thanks for your comment .I'm glad this video helped you. 😊 please share the channel with your friends on Social Networks and hit the like button.👍🏽👍🏽 kzitem.info
@chazmereanderson9735
Жыл бұрын
What kind of screws do you need i can’t find mines
@ProAssembler
Жыл бұрын
It is on the box. Pay attention you will found them
@ProAssembler
Жыл бұрын
did you found them ?
@rigohernandez1463
3 жыл бұрын
I just finished the table right now this helped a lot thanks !
@ProAssembler
3 жыл бұрын
Hi Rigo. Thanks for your comment .I'm glad this video helped you. 😊 please share the channel with your friends on Social Networks and hit the like button.👍🏽👍🏽 kzitem.info
@TheOneanjel
2 жыл бұрын
One thing I notice after actually putting this together is the directions say not to use a power tool. But I'm sure they are just trying to prevent rookies from over-tightening. It is easy to put together but a bit time & labor-intensive if you just have the little L-wrench provided. (I couldn't find any Phillips that worked here except on the seat). I made the mistake of securing the wrong piece before realizing the hole has to go on the inside, which is shown here but still easy to overlook. And then when attaching the seat, no where does it tell you to put the back of the seat flush with the back of the chair (also shown here). But leaving even a little gap makes it impossible to screw in by hand. This is a decent inexpensive set. Probably won't last years but I got it because I've lugged huge, expensive furniture around for decades, then stored it for years. Finally got rid of it all and will only use light-weight, portable, disposable things now that I'm on my own, basically. I've spent so much on storage and moving fees, I could have bought 500 of these by now. My biggest gripe is that furniture now uses these odd L-shape wrenches and none of my expensive tools work to put such things together. And I've never seen a seat that "makes its own holes". That is not a sign of quality. But they are doing the job.
@ProAssembler
2 жыл бұрын
Hi Angel . Thank you so much for the comment you made. First of all, you are right, I use tools to save time Secondly, in any case, a screwdriver must be used to assemble a part of the video If I did not name it, then everyone would say, "Where is the screwdriver?" 😊😊😊 Thirdly, they do not put the hole because they have to use a very small drill and it is a little difficult for them to use a one millimeter drill and also the absence of a hole keeps the screw in place. Fifth, I completely agree with you. We are always moving heavy and useless things, and if used properly, it will take at least ten years, except for the seat covers, which can also be replaced with a staple and a good cloth after a few years. Buying a pack of Allen wrenches is not bad, especially for $ 7. Anyway, I enjoyed your comment. Good luck.😊
Пікірлер: 35