How to assemble or make a cable line for the front and rear lights of the Suzuki Smash, Shogun Sp 125.
The first step is to know the four cable colors and their functions in the kiprok socket, namely:
1. the white line accounting cable is the main current for lighting from the lamp spool and make sure there must be a current. And enter the kiprok.
2. the black and white line cable is the time for kiprok, make sure it must be attached to the body or motor frame. if the cable is not attached to the body or motorcycle frame, even though the kiprok is new, the main light will break and the battery charging will quickly come up short and die.
3. The white cable with the red line is as a charging current from the road spool that enters the kiprok, make sure there is a current.
4. The red wire is the kiprok output current that goes into the battery plus and is parallel to the ignition key.
To assemble the front and rear light cable lines, we take the yellow cable and the white line directly into one cable from the on of switch and another cable from the on of switch or the current output we connect to the main light and one more cable that is in the main light or we connect the headlights to the body or motor frame, because it's the time.
then for the taillight path we connect it with the output cable from the on of switch and the time in the taillight can be connected to the body or motor frame.
Thank you very much to all #SUBSCRIBER#and viewers wherever you are, hopefully the knowledge is useful.
Please #SUBSCRIBE AND LIKE#
#SIDIK NURYADEN CHANNEL#
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
Негізгі бет Автокөліктер мен көлік құралдары How to Assemble / Make a Cable Line for the Front and Rear Lights Suzuki Smash, Shogun Sp125
Пікірлер: 157