How to Assemble Scandinavian Table with Drawers??
1. Sort the screws and locks
2. Insert the two stands (there’s a corresponding hole in the table where you can insert the stand)
3. Assembling the upper drawer:
3.1 Prepare all the tools - 8 screws (with circle edge), 4 locks (circle-shaped) , knob of the drawer along with 1 small screw, 4 ply boards and 1 card board
3.2 Insert each screw into the hole of the plyboard that you can find in the side
3.3 After assembling the two sides of the drawer, insert the card board and the back portion of the drawer
3.4 Insert the front portion of the drawer
3.5 Insert the lock into each hole that you can find inside of the assembled drawer
3.6 Insert the knob of the drawer
4. Repeat all the steps in 3 for the middle drawer
5. Assembling the drawer stand (please watch the video to see what it looks like)
6. Assembling the bottom drawer:
6.1 Tools needed - 1 square shaped plyboard, 1 screw (which both edges are round), knob of the last drawer along with 1 small screw, & 1 hinge along with 1 small screw
6.2 Insert the screw into the hole that you can find in the right bottom of the middle drawer
6.3 Screw the hinge into the bottom right edge of the plyboard and insert this into the hole that you can find in the bottom of the drawer stand
6.4 Insert the holder of the last drawer
7. After assembling all the drawers you have to insert another screws which both edges are circle , so you can slide the drawer and keep from falling (applies to 1st & 2nd drawer)
8. For the last drawer, use the bumper and screw this at the upper left hole that you can find in the middle drawer
9. Connect the scandi desk and the drawer by using the remaining screws
Негізгі бет HOW TO ASSEMBLE SCANDINAVIAN TABLE WITH DRAWERS | SHOPEE ITEM | PLEASE SEE DESCRIPTION BELOW
Пікірлер: 76