Great Video! That the the best, most thorough video for cam follower replacement I have seen. I especially like that you did not remove the final hose and still replaced cam follower. Most videos I have watched on this subject were taking off the banjo bolt or removing the whole fuel pump from all hoses. Mine is like this vehicle , so no banjo bolt. Thanks for the video.
@audi_anatomy
3 жыл бұрын
I am so glad it helped you! that why i enjoy filming it :D and yes, i try to make it as easy as possible :D
@maxdruciak2724
Жыл бұрын
Mine with 106516km was in the begining of the end. Worse than yours. Black coat on the surface was all gone and started to wear towards the thickness. Good Video.
@audi_anatomy
9 ай бұрын
Great thing you decided to check it out, because you never know how far away from catastrophy you actually were. But now you're safe again! :)
@bettodecio1883
Жыл бұрын
Thanks for the video mate I followed it today and change mine and I could save some £ thanks to u 👊🏾👊🏾💪🏾
@audi_anatomy
Жыл бұрын
I am really happy to hear that! Wish you a lot of safe miles!!
@AndrewH125
3 жыл бұрын
Just did this off your instructions, awesome video, that’s for the help
@audi_anatomy
3 жыл бұрын
Thank you so much!
@JY11
4 жыл бұрын
THANK YOU!SAME DRIVING THIS EA113 AUDI TT MK2
@audi_anatomy
4 жыл бұрын
you are welcome, i am glad it helped you!
@gaylepocock5882
3 жыл бұрын
Superb video, thank you!
@audi_anatomy
3 жыл бұрын
thank you very much Gayle!
@CarChris82
3 жыл бұрын
The 3 bolts are torqued to 10nm
@scottmcnabb9122
10 ай бұрын
I changed my cam follower it runs fine but it seem to be using more fuel why is that . After i changed it . My cam follower was in bad shape no rubber left on it because i wasn't a where of it at that time . Not all the way though the cam follower thank God .
@audi_anatomy
10 ай бұрын
there is no rubber, it is made of steel only. the black top is just made of hardened steel. But great job, you might have saved your car! :D The fuel consumption has nothing to do with it, unless you didnt put the fuel lines back properly and now have a fuel leak. So start the car, open the hood and check if there is fuel leaking from the pump.
@Jxs3tin
4 жыл бұрын
Great video thanks mate
@audi_anatomy
4 жыл бұрын
Glad you enjoyed it
@darkjak4
3 жыл бұрын
Hello there really good tutorial on that. Just got the same engine on my newly bought TT 2.0 Tfsi S Tronic BWA engine, sitting at 182.000k I've took a close look at the HPFP and its seems they it has never been changed. So I'm kind worried.
@audi_anatomy
3 жыл бұрын
Do the change then asap, it is cheap and easy and can save your car :D good luck and lots of nice km with new car!!!
@darkjak4
3 жыл бұрын
@@audi_anatomy good news just change mine today. Like I've told I guess it was never changed before cause the head of the bolts and nuts didn't have tool marks. And also the o-ring was black. Mine was almost like the original one you took out from your car. Used on the black coat but flat and in good condition, the cam lobe was also clean of marks as well as the HPFP piston. I was really worries cause with this amount of kilometres and still with the original one was worries that would found a hole in the follower, since I've read around here of cars that hey failed way sooner, don't know if it was because of bad oil/maintenance. At least now I'm relieved and know that don't need to worry about it for another 2 ou 3 oil changes. Again great tutorial and info keep does videos up.
@audi_anatomy
3 жыл бұрын
@@darkjak4 great news! thank you, i hope you enjoy your car for many more miles!! :)
@pixing_yang
Жыл бұрын
hi bro... i have my audi tt if i drive 50-70km/h its come out engine warning... and my car like jrking .. wht is that problem , i alrrady chnge . ignition coil , and spark plug but still.
@audi_anatomy
9 ай бұрын
really hard to say without checking the car properly. I suggest you read the obd codes out, before you buy new parts and change them out..
@jairotylera7422
4 жыл бұрын
Hey, thanks for the howto! Can you tell us where to buy the o-ring replacement or at least its dimensions?
@jairotylera7422
4 жыл бұрын
So I've just found out the piece. It's OEM reference part number is WHT005184 for anyone interested in buying it.
@audi_anatomy
4 жыл бұрын
Sorry for late reply! I order all part online, cheap and delivered to your house ;)
@charlies418
3 жыл бұрын
If you fit the uprated fuel pump then you need to inspect the cam follower every 3 months otherwise you'll destroy the engine when the bits block the oilways.
@Vegitha786
Жыл бұрын
What happens if you don’t change the O ring?
@audi_anatomy
Жыл бұрын
there is always a higher change of leak. It might also hold just fine, its just the chance :D
@BabaBaba-mm1rz
4 жыл бұрын
So you dont need to let the oil out the engine to open the fuel pump ? Because a friend sayd it to me that i have to let the oil out the engine before i work on the fuel pump
@fabiohendel768
4 жыл бұрын
The oil is supposed to be in the oil pan because it’s sink by gravity :) I think it’s just a precaution to not burn your hands with it :)
@audi_anatomy
4 жыл бұрын
apsolutely no. There is going to be a bit of oil on the follower and that is ok. You need to let the gas (petrol) out slowly, just like in the video, through a small valve on the pump. :)
@stuartwinstanley4949
4 жыл бұрын
What are the torque settings for the 3 bolts
@audi_anatomy
4 жыл бұрын
oh, sorry, i forgot them. Take a look at "humble mechanic" YT, he has a video with torque specs I think
@jhaouam
3 жыл бұрын
@@audi_anatomy 10nm
@balemogig
4 ай бұрын
That's a golf 5 gti engen
@EdwardChew
3 жыл бұрын
Hi bro. I just bought a 8J at 150,000km. What damage does it do if not changed?
@audi_anatomy
3 жыл бұрын
hi! It has slightly shorter piston throw when pumping fuel, so minimal signs of lowered fuel pressure. If its bad bad, you can end up having metal particles falling off, mixing with oil ands possibly clogging other engine parts causing oil starvation
@EdwardChew
3 жыл бұрын
@@audi_anatomy oh ok got it! Took it out today. Mine looks new 😁
@EdwardChew
3 жыл бұрын
@@audi_anatomy thanks bro for sharing this video
@tinsaric2329
3 жыл бұрын
My fuel pump failed, so i took it to audi service, im unsure did those fools changed my cam follower with my fuel pump. it would be logical to do it. right ?
@audi_anatomy
3 жыл бұрын
In this video I work on “ high pressure fuel pump” You have another,” low pressure pump” in ypur gas tank. Which one did they replace? :) You can always check this follower, and if you see scratched surface change it, its 10 eur ;)
@tinsaric2329
3 жыл бұрын
@@audi_anatomy high presure
@audi_anatomy
3 жыл бұрын
That is the one in video. Sure, follow the vid and check the follower. If its new, it should be all black on the top.
@tinsaric2329
3 жыл бұрын
@@audi_anatomy with the notion that im going to do stage 2, i think this inspection is a must. Cheers,tnx
@filipemedeiros685
3 жыл бұрын
Quantos a quantos se muda isto 10.000km ou 20.000mil km?
@Rmarreiro
3 жыл бұрын
30mil km, carros alterados 15mil km será o mais recomendado.
@intunewithcars9484
3 жыл бұрын
mine had a hole ...
@audi_anatomy
3 жыл бұрын
That is a red flag and great that you changed it!! it was close to causing some serious damage to the whole engine, and your fuel pressure is probabbly much better now !!
@intunewithcars9484
3 жыл бұрын
@@audi_anatomy was a tiny mark on the cam when i removed the follower and the end of the fuel pump is slightly worn after the spring that goes into the follower, been ok since i replaced at a crucial time but just goes to show these cam followers must be replaced if you being a used car or every 20k, my car is an 8p audi a3 2.0 tfsi s line stage 1 remap
@audi_anatomy
3 жыл бұрын
@@intunewithcars9484 of course. Especially if you tune a car and push it a bit over stock power, it cost like 10 eur, and it takes 20 minutes to replace :)
@hugoboss8786
3 жыл бұрын
Thermostat könntest mal Video machen das steht auch noch auf mein Prog. Hab auch ein TT BWA und komme aus Wien. Ansonsten Top Anleitung warum allerdings auf Englisch versteh ich nicht ganz.
@audi_anatomy
3 жыл бұрын
hab ich gemacht aber nicht gefilmt. Wenn du mal hilfe brauchst melde dich, bin auch aus wien :D
@hugoboss8786
3 жыл бұрын
@@audi_anatomy schreib mir mal auf fb: is dort mein Name
@hugoboss8786
3 жыл бұрын
Oder du gibst mir dein Name
@kennerf117
3 жыл бұрын
World's slowest worker.
@audi_anatomy
3 жыл бұрын
I am not a worker ;)
@MzClementine
2 жыл бұрын
@kenny hewitson interesting. He's showing people how to replace something that is a very important thing to replace. Being methodical, showing how to do the extra things that people don't know how to do. If you read in the comments you'll see that. Not up to your expectations. You could do your own... Says the man that has a Passat. Not as manly as your beard is I see. Hahahaha 🤣
@kennerf117
2 жыл бұрын
@@MzClementine is this even worth commenting back on?
@Cirbonukleon
2 жыл бұрын
Danke fürs perfektes Video! Vdaka a chvala! :-) Die Nummer des O-rings lautet: WHT005184 Elring
Пікірлер: 60