Done some quick and dirty test runs (on a Windows machine), here are some additional notes: - If you have the full version of Kontakt, but can't find Creator Tools, open Native Access and install it. - Make sure that there are no subfolders with audio data in your sample directory, because the script will also include files in subfolders. I once got a nicely mapped impulse response. ^^ Pitch detection worked quite well. Even with short percussive samples that weren't tuned at all I still got a somewhat decent mapping. Thanks Dave!
@EnricoNichel
4 жыл бұрын
Very helpful and clearly explained. Thank you!
@kirkegodfrey414
3 жыл бұрын
Thank you for this… its sort of amazing that NI don't have a LOT more scripts and Walk throughs on this… So again, THANK YOU FOR STEPPING IN.
@jaybarls
3 жыл бұрын
This is brilliant, Dave. Finally got round to watching and I love how well this is explained, including leaving things open for more learning with Lua script. Thanks so much!
@Hrjoshi465
4 жыл бұрын
This saves a lot of drag and dropping to exact velocity range work. Saves my precious time and can spend some time on GUI. THANKS DAVE!
@kirkegodfrey414
4 жыл бұрын
Thank you for this. Creator tools is obviously powerful but there seems to be very few walk throughs showing how to use it. VERY MUCH APPRECIATED
@Limbiclesion
3 жыл бұрын
Hi David hope your well and productive….great tutorial ..I just didn’t know that creator tools existed…heaven sent ..thanks 🙏🙏🏿👏👏🦄🎩👍
@Mr.AndrewsMusic
2 жыл бұрын
This is super helpful, Thank you David.
@briancullenmusic
Жыл бұрын
Very useful, thanks.
@santoshgujar5237
2 жыл бұрын
Thank you, Sir
@arnoldhilberink
4 жыл бұрын
wow thnx for the tip
@alexanderkaye4105
4 жыл бұрын
Wow.... this seems pretty huge. I've learned so much from your videos on how to create Kontakt instruments. I'd really be lost without you! I've honestly been avoiding making a new Kontakt instrument of piano samples I recorded (hundreds of samples..) -- but this seems like it's going to make it much much easier ! THANK YOU
@otisrichardson881
3 жыл бұрын
This should run inside of Kontakt, by drag and drop, mapping by pitch and volume (velocity).
@jeremiahlyleseditor437
4 жыл бұрын
Very useful Dave. Never knew this was available. Thanks
@angeruroth
4 жыл бұрын
Awesome! This is going to be really helpful for large sound sets, although maybe a bit messy if files are not labeled. I wonder how well it works when the tone is too off or the sound too noisy, or when it goes from C to C# and so. Thanks David!
@ishbeck
2 жыл бұрын
Wow! Again, so great!!! Very helpfull! Thank you.
@aqrs269
11 ай бұрын
Thanks for sharing this! A deep dive into LUA would be much appreciated. Reason Studios handles controller scripts in LUA. I was planning to customize the AKIA MidiMix but gave up in the end.
@Gardener7
3 жыл бұрын
Thank you so much for posting this!
@citizenworld8094
3 жыл бұрын
I decided to press the like button to give him 200 likes with no dislikes! However this was way too difficult for me.
@MohammadSalah1979
4 жыл бұрын
Nice explain but what I will rename my samples I mean no need to put key notes 😬 in the end of samples
@michaelcooper1473
4 жыл бұрын
Wow amazing!
@dreamwishaudio7019
2 жыл бұрын
Kontakt requires a lot of effort for simple things where in other samplers can be completed in the blink of an eye. The most famous library platform needs a major update which has been delayed for over 10 years.
@pongtrometer
2 жыл бұрын
Does Decent Sampler have a basic drag and drop system for the non-scripters , align the samples simply. Thanks
@kirkegodfrey414
3 жыл бұрын
Long time listener first time caller😃. If a subset of soft samples are recorded at a lower volume, let’s say -22dB. Then mapped to a low vel range zone, with the louder samples reading at say... -3dB, and if the amp is then made vel responsive, then surely the samples are played back at a quieter vol via amp , AND lower volume due to being -22dB. So there will be a real STEP when transitioning between the 2 vel ranges. Any thoughts? Ps. Please do more of these are they are incredibly helpful
@filipjonathan
2 жыл бұрын
Check out this video. They talk about it at one point. kzitem.info/news/bejne/w2-j15V4smJyq6g
@dafingaz
4 жыл бұрын
Nice!
@nicksaya
Жыл бұрын
I keep getting error when i run script. I do have an instrument selected but i get this error sying CT are not focused on a Kontakt instyrument. to solve load in Kontakt and select from INS drop down. I have an instrument loaded and selected.. What could be problem?
@charlieclymo
Жыл бұрын
Hi David, this is great. Question - is there a script available to automap samples to an existing group?
@TheErkkiNyrkki
4 жыл бұрын
Thanks. I find it very strange that only Logic sampler of all the samplers I know of is able to do this automatically. Or actually ThumbJam app can, but it's only for iOS. It shouldn't be very hard to detect the pitch and compare the amplitude of the samples so why don't every sampler do that?
@DavidHilowitzMusic
4 жыл бұрын
Right? It’s absolutely crazy that we’re still doing this in 2020. That being said, this is movement in the right direction.
@claudiopelissero6158
4 жыл бұрын
@@DavidHilowitzMusic A little bit of history: Once upon a time (2009!!) there was an amazing set of apps created by an Italian genius (AutoSampler & KeymapPro) that were doing this and a lot more than this. Sadly Apple bought the company (Redmatica) and transformed those amazing apps in "Autosampler" that sadly use only 10% of the power of those apps.
@nexatil9490
11 күн бұрын
Hello, there is no lua script that maps the samples and maintains the automatic loop of each sample, right?
@RS-pm8qk
3 жыл бұрын
Hi David, ive tried to follow these steps 3 times now, and im getting a error message "Folder does not exist" Am I missing something here? Thanks
@JureJerebic
3 жыл бұрын
Weird, doesn't work for me. I have my samples named G2.WAV, etc., still Kontakt doesn't import them. The Creator Tools seems to detect them, but then it doesn't import them into Kontakt. Any ideas why?
@DavidHilowitzMusic
3 жыл бұрын
Are you pressing the upload button?
@csillery
2 жыл бұрын
If I map a sample in, it plays slower at the lower notes and speeds up as you go up the keyboard. Is there a way to make the keys all have the same adsr?
@mitchellmcdermott1143
3 жыл бұрын
Followed all steps and can't seem to work. Using .aif files, could that be creating a problem?
@RyanSprattiscool
4 жыл бұрын
Do one on Scripting drag and Drop. Pretty Please!!!
@TerenceKearns
3 жыл бұрын
wow. didn't even know I had creator tools. Looks like a full blown IDE
@musictechnology7165
3 жыл бұрын
Windows creater tool link please
@DavidHilowitzMusic
3 жыл бұрын
Creator Tools comes with Kontakt 6. You should be able to find it in the Start Menu in the same program group as Kontakt 6.
@musictechnology7165
3 жыл бұрын
@@DavidHilowitzMusic kasun32652@gmail.com Information please ❤️
Пікірлер: 45