Thank you for showing when to move the dial and the whole weight. None of the other video’s I’ve seen has made that crucial distinction clear. I know finally have my new turntable set up. THANK YOU!
@sideshowdee
4 жыл бұрын
STILL my favourite balancing vid. Explanative; easy to follow; authentic. I send others here!😎 Shouts Out to Greg! 👊🏾
@LongPlayVinyl
7 жыл бұрын
Awesome! It's always nice to see more How-To Vids out there, helping people set up their stuff properly.
@wereonlyimmortalforalimite7495
3 жыл бұрын
You sir are the hero of the day. To think, after all these years, and I never paid any attention to proper adjustments. I bought a quite expensive record yesterday and one of the tracks skipped all way through. The vinyl is in absolute mint condition. I cleaned it anyway. No, didn’t help. Then I found this: boom! Not one skip after I followed your instructions. Thank you!
@LarryCooney
6 жыл бұрын
Thank you. I just got the same exact setup (1200 and Shure WhiteLabel) and it is definitely no doubt a little different from the record players I had in my youth. So this explained it simply and easily and could not have made it easier to do.
@colinwatt2956
2 жыл бұрын
Thanks Greg. I treated myself to a Technics deck a few weeks back. I thought I had done it wrong as the sound output was terrible. Your video confirmed I had dove it right rather I have a damaged stylus. The stylus has gone back to be replaced. Once again thank you for such an easily understood video.
@TheMoldyVinegar
3 жыл бұрын
Thank you! I spent my entire night last night frustrated because I couldn't figure out WTF I was doing trying to balance the tone arm. The tiniest bit of this video and it all makes sense. Play on!
@anthonyxuereb792
3 ай бұрын
After rotating the counter weight to level the tone arm, lock it down and then set the fine adjustment for the stylus and anti skating. To check if the anti skating is accurate, If you have a one sided record that has a smooth side, play it and see if the tone arm deviates too much one way or the other and so you can make adjustments accordingly.
@Vingul
2 күн бұрын
Have seen this suggestion before but surely that will harm your stylus?
@smtmsjacolyn6699
4 жыл бұрын
Very informative and distinctly very helpful, grateful and many many thanks.
@Tooslow24
8 жыл бұрын
Fantastic video, really helped me, thank you
@traceedyell7579
7 жыл бұрын
great info, easy to follow. Thanks!
@charlieramz3126
5 жыл бұрын
Love Smartbar!!!! Place is legendary!
@VinceVega303
2 ай бұрын
Superb tutorial. 😀
@jpitkethly77
4 жыл бұрын
Thank you very much that was very helpful 😊
@spicystick
7 ай бұрын
Thank you for the video. It’s direct and easy to follow. My question is about height adjustment, how can you tell if you have the correct arm height?
@eumaios
5 жыл бұрын
Quick and easy, thank you😁
@scottreed8477
4 жыл бұрын
Hey man! Just got my first Technics. Wasn't too sure about the counterweights. Your video really made a difference in how my records sound. Thanks!
@reubenbrooks3674
2 жыл бұрын
The 1200 is the best turntable ever made and still is.
@phillong5808
Жыл бұрын
Nice video and choice of track
@mauriceswift73
3 жыл бұрын
Thanks for the video.
@davidsummer1983
2 ай бұрын
Thank you so very much.
@hulkican7237
4 жыл бұрын
thanks dude. hey from Istanbul
@62pixels48
5 жыл бұрын
Amazing video help me!
@ryancanfield3054
Жыл бұрын
Thanks. Just bought some ortofon night club needles and needed to watch your video to know how to set the to earn weight to specified recommendations by ortofon
@stopit8669
7 жыл бұрын
Easy video, my whole counter weight was backwards.
@kahunawaterpolo
3 жыл бұрын
I have those same Slipmats!!! Love Grammaphone!
@1imanni1
2 жыл бұрын
Awesome! Thanks
@zimmetry
9 жыл бұрын
Simple useful instructions... Thanks!!
@GregKusnierz
8 жыл бұрын
+Harry Pena thanks
@cranke99
11 ай бұрын
I remember this guy from Purgatory Pizza😅 This is a great video! Thanks for the info.
@raytheshredgod6987
3 жыл бұрын
Thank you!!!
@Mark22134
8 жыл бұрын
Thanks Bro.
@soothsayer2406
Жыл бұрын
Peeette!!! great channel!
@MichaelFinkCMT
2 жыл бұрын
Thank you
@benitoperez4312
7 жыл бұрын
very cool to learn..:)
@mikezah3032
Жыл бұрын
So simple and short video 👌🏻
@agnesdonnelly4524
Жыл бұрын
thank you
@chylogurti
2 жыл бұрын
Nice video. Thanks. Just got a SL 3300 from a house clearance. A few issues that I might try to sort. It needs a new stylus to try out. Don't want to spend much in case I cant fix it. Any suggestions would be welcome. Thanks
@nigelstewart
2 жыл бұрын
Thanks!
@chadwhitworth1681
2 жыл бұрын
what about the height of the tone arm? Should that be level?How do you measure that? Do you put more slip mats underneath if it is nose down and tail up?
@snublerud
2 жыл бұрын
I’m not sure if keeping the anti skating at 3 is a good default...?
@davidgarrett2888
7 жыл бұрын
Thanks
@brianwolfe1822
2 жыл бұрын
Cool I thought I knew speakers and turntables lol. Thanks friend
@danielstartek1497
Жыл бұрын
Hey smart bar I'm using a tractor control on my corn fields. How do I harvest it?
@ahhgea
2 ай бұрын
What about the height adjust on the tonearm itself? Is that not part of it?
@duncanmatthews1977
6 ай бұрын
I think this is a good quick video to get things approximately correct. When you say start by getting it to balance, there are a range of heights this could be. It should be zero where stylus and vinyl live up horizontally.. then add required weight. Here your initial balancing is far too high.
@brandamnRN
6 жыл бұрын
Is the tonearm supposed to resist/move towards the right when it is floating? like how are you supposed to get it to float but also so that it can actually sit and track a record? great video btw
@Chudmeat
5 жыл бұрын
If your tone arm is moving to the right when it's floating, you need to adjust your anti-skating dial.
@buch3mt
3 жыл бұрын
I’m Having issues with the needle skipping back and staying in the same place
@Cl4rendon
3 жыл бұрын
The only part i appreciated was putting on Andres record...
@Rooper65
2 жыл бұрын
What to do if u don't have antiscating ?
@KingCosmoTheGreat
7 жыл бұрын
Thank you for the Video, Whats the Vinyl name of the Andrés record??
@nigelmiller5609
7 жыл бұрын
Andrés - New For U
@KingCosmoTheGreat
7 жыл бұрын
Thank you.
@djpaul146
3 жыл бұрын
My tonearm counter weight doasant have a numberd dial on it as its a kam ddx750 but I can't see any help video on here about my kam
@duncanmatthews1977
6 ай бұрын
Get it to float/balance and then add weights. Or, twist it in and use a set of specially designed scales to measure the desired weight.
@Scorvet
2 жыл бұрын
Tonearm height?
@faktumstream1beatz335
7 жыл бұрын
i have numarks.... im fucked........
@TheRichmau5
3 жыл бұрын
I use anti skate 0.
@thaliajacquelinegillcamare187
2 жыл бұрын
A
@joopwingen8185
2 жыл бұрын
Je vergeet de hoogte aftestellen
@dinotrifunovic2421
5 жыл бұрын
at 2:39 you say to "dial" I don't understand really this point ??
@TemujinScott80
3 жыл бұрын
The dial is the numbers you see on the counterweight
@dulichion
2 жыл бұрын
You didnt got over tonearm height at all
@casejinable
3 жыл бұрын
Can someone just make a video to the point? I don't need the intro
Пікірлер: 66