For all your RadioMaster needs -- Please shop GraysonHobby - every little order helps keeps the doors open and the videos flowing graysonhobby.com/radiomaster-er5a-5ch-elrs-receiver.html
@antonr4823
18 күн бұрын
Hi guys. I did not find your video where you will show how to connect two er5a and make 10 chanels. is it still in work or i have just missed it???
@jacksonrcaviation
Жыл бұрын
Thanks my friend, very informative. We are going this route I believe. And pilots if your near Grayson Hobby please stop in and see Will, he indeed helps us with set ups of our fpv's.😎
@expertreview2912
Жыл бұрын
Just a note here from someone who has the receiver. The first four channels will work fine. Channel 5 is a kill switch channel. Which means it's binary. On and off. If you want to use it with full PWM movement you need to go into the device itself and switch it to channel 6. So anything on that airplane that's using channel 5 will not work properly unless it's updated in the internal web site
@CMO-CYCLEFPV
11 ай бұрын
if its binary can i attach led lights on it
@allroads2454
Жыл бұрын
Just realized you guys are in Georgia. Need to make it out to your shop. I’m about an hour away.
@graysonhobby
Жыл бұрын
Let’s go! Happy to show you around
@choppergirl
Жыл бұрын
Since I paid to have TBS put military grade encryption into Crossfire, now reason to switch.
@graysonhobby
Жыл бұрын
I want 🙂
@yogevcohen49
Жыл бұрын
Hi great video! Is there an option for battery telemetry on this receiver?
@barrythelad7793
6 ай бұрын
I had a problem with this exact setup. The ESC and brushless motor worked fine, however when I tried adding a servo to the setup (9g micro servo), it only worked for a second and now doesn’t work at all. I tried again and got the same result with a different servo. Any tips?
@otm646
5 ай бұрын
Does the ER5A receiver only operate in ELRS mode? As in if I had a 4 in 1 TX16 I'd have to purchase the ELRS module that goes in the back to use this line of receivers?
@Mya-2022
6 ай бұрын
Can I use a pocket transmitter with those recievers
@allrcflyingisfun
Жыл бұрын
You guys need to make more of the version difference as my ELRS backpack was on version 3.0 and would not connect to any receivers that the versions were different and the receivers would not update to version 3.0 so had to revert my transmitter to version 2.5.
@BeachbumfromBrick
Ай бұрын
This I can pop in my cc2500 and it adds what I NEED ? Elrs addition?
@captaindronieversefpv
11 ай бұрын
my modul have a pairing phrase , should i build the phrase too for my RX from configurator ?
@christopherreyes5245
Жыл бұрын
Can i bind it on my radiomaster pocket elrs version
@ajishtm4306
9 ай бұрын
Can i use this elrs er5a for fpv flight controller
@tazgws
Жыл бұрын
Can't wait for the next video. Have you done any range testing on the ER5A yet?
@graysonhobby
Жыл бұрын
We will test the proximity. Basically we’re going to fly around the building where we always lose signal and see if ELRS will beat it.
@Rcfishingagadir
Жыл бұрын
Hi do you know how to recover this receiver...i lost wifi mode ...its in solid green....i updated with bad flash. Thanks
@marcelodauria7014
Жыл бұрын
Hi, I'm from Argentina, could you explain how to link a Hitec Aurora 9 receiver with the Radiomaster step by step?
@SpeedDemonExpress
4 ай бұрын
My TX16S just says loading... when I click on ExpLRS
@ace-gc5xm
Жыл бұрын
would this work with fybarless heli? and if not would be great if flybarless manufacturer could update there systems to use them
@Danielrodriguez-lf9nq
Жыл бұрын
To use these elrs receivers (ER5A and ER5C) do I necessarily need an elrs module in the radio (like the range, micro or nano)? Or its possible to use within long range? Thanks!
@mayankyadav8654
Жыл бұрын
I am doing the same process again and again but it is not binding the receiver stays in the binding mode please help me out
@stevealoia
Жыл бұрын
Hey guys I just got this radio X16S it’s the ELRS version. I been trying to bind the Radiomaster R88 to it . Does that mean I can only bind ELRS receivers. Or do I have to update my firmware . Thank you
@ParagPandit
Жыл бұрын
If the tiny ELRS receiver supports FPV, I don't understand why the bigger PWM receiver with pins and a plastic casing cannot support FPV! Why can't airplanes have FPV with this receiver whereas whoop drones can?
@lokaero
Жыл бұрын
We need 10 ch setup ASAP
@brechtxbrecht
Жыл бұрын
Hey guys, great video! Got myself some er5a receivers. Now when I connect them, the servo’s in my plane make a buzzing noise. Is this fixable or better to ignore?
@allrcflyingisfun
Жыл бұрын
If ELRS is to continue to grow as a system it needs to stabilize and to be as simple as SPECTRUM otherwise the general old timers that are the mainstay of the RC Hobby are not going to buy into this system and it's going to die for lack of sales. IT NEEDS TO BE SIMPLE AND FOOLPROOF
@TheLostSquadron
Жыл бұрын
It's an open source project, always changing and improving. If you're going to mess with ELRS, which also probably means messing with Open/EdgeTx, you have to want to experiment and learn.
@allrcflyingisfun
Жыл бұрын
@@TheLostSquadron Yes but there is a cohort of fliers that are the mainstay of the club I fly with that are old school and just really want plug and play and they are the predominance of the purchasing fliers that have money to spend and what you do you want to do shove that market aside, so what's left the few kids that are struggling with contract work and low wages and inflation.
@TheLostSquadron
Жыл бұрын
@@allrcflyingisfun There are a bunch of older guys in the club I'm in, and many of them already struggle with Spektrum. They look at OpenTx and FPV stuff and just kinda glaze over. This is never gonna be for them. It's not just an age thing, it's the will to expand/learn. I'm not young, been flying since the 90's and came from the Futaba and Spektrum world.
@allrcflyingisfun
Жыл бұрын
@@TheLostSquadron Are you still flying 27mzh or 35mzh no your flying 24 why because the change over was made as easy as possible,
@TheLostSquadron
Жыл бұрын
@@allrcflyingisfun I don't understand your point there. Changing frequency was mandated, protocol/radio choice is wide open. The guys that don't want to fiddle around will just stay on DSMX, it's fine that way.
Пікірлер: 39