This is crazy, the whole video my attention was there! This makes me want to really build my own bike with this type of frame too - You guys absolutely killed this!!
@danmantyla3315
2 жыл бұрын
thank you for the detailed description of the wiring. So many other ebike builds skip right over this!
@21degrees
3 жыл бұрын
It was worth the wait. I am sure you will get 100,000 subscribers and people will watch this 2 years from now. I recommend the next step being to do a +2 (plus two) wheel and tire conversions and play with the the sprockets for more speed. It is not expensive or very time consuming. This will keep the current fans happy, and many new ones will subsribe trust me!!! GREAT JOB GUYS
@stretchy7
Жыл бұрын
Well it’s been 1 year
@21degrees
Жыл бұрын
I am surprised the channel is not more popular. I let them know that recent videos have audio problems (Hard to hear) but that issue was not addressed. Also there was little in terms of "bikes" as compared to "boards". Boards of all types have a limited audience
@MatthiasGeraghty-vd6go
11 ай бұрын
Been two years 🎉
@LordHolley
6 ай бұрын
I love it. That's a slick setup that definitely gives some ideas. Nice work.
@DIYesk8Builders
5 ай бұрын
Thanks!
@TechGoop
3 жыл бұрын
I forgot to add in my last comment the power efficiency and weight of this motor you are using. Compared to the old style DC motors this thing is a little monster. We are running the same motor on a setup at work and it's an absolute beast. The weight difference alone is astounding! Brushless motors are definitely the future.
@chialor1945
2 жыл бұрын
You fellas are too under-rated. Always cool e-toy contents.
@tavi7
2 жыл бұрын
Amazing project, would love to see a CYC X1 Pro Motor in the V3 tho, it might be overkill but definitely fun
@Full_Throttle_no_Brakes
2 жыл бұрын
Nice build. You could add that piece of metal with the bolts on the bike frame, outside the box, vertically just below those to 2 supports for the battery connecting them, this way you Would have way more space inside the box. So the screws go from inside to outside. Just add washers and use flat head screws OR Soldering the bolts below those 2 pieces of metal that support the battery...
@jamieniche
3 жыл бұрын
Amazing build. It would be worth adding an eternal heat sink to the vesc.
@DIYesk8Builders
3 жыл бұрын
100%
@austinnguyen6538
3 жыл бұрын
You should try to add a suspension fork in the front
@krishnendusamanta2900
3 жыл бұрын
Yes
@joej3365
2 жыл бұрын
I would just Jerry rig some shocks in the back and maybe get a fork suspension
@hexerey
Жыл бұрын
Who needs suspension anyways
@offgrid2010
Жыл бұрын
This sure motivates me to get to work on my project - a Zike pedal skateboard with the crank and pedals removed. Thank you!
@DIYesk8Builders
Жыл бұрын
Good luck!
@beechcraft12
6 ай бұрын
bro, you put the o-ring seal on the outside and the nut inside by itself so it can sit flat and pull evenly on the assembly squishing the o-ring outside for your water tight seal. the way you did it can allow water to follow the threads from outside to the inside.
@worlukk
Жыл бұрын
super clean build. great video and mini bike!
@Alpha-jg9mi
2 жыл бұрын
Awesome build, my only opinion would be , at 26:11 you can see the chain needs some alignment tweaks, and a tensioner would help with chain tension also.
@DIYesk8Builders
2 жыл бұрын
Thanks for the tip!
@TheXimia
Жыл бұрын
Insane project! Really sick! Perfect video!! Thanks for the video!
@DIYesk8Builders
Жыл бұрын
Thanks!
@ferdencio8821
2 жыл бұрын
this bike are really good for commuting specially for students who is located near their schools
@mykrowsy
3 жыл бұрын
What a cool and fun build! I'd love to do something like that. I recommend you cut down those battery box mounting bolts to a shorter length and use some sort of spacer in the bottom so the weight of the battery can sit on something other than those bolts/nuts
@Raymo2u
2 ай бұрын
You guys should sand down what you plan to weld for the best joint integrity.
@TacEsk8
3 жыл бұрын
Looks awesome, watched the entire video. I'd add some suspension to it and maybe anyway if mounting the battery a bit lower to the ground? To have lower center of gravity, definitely would have different feel and better handling
@scooter1748
11 ай бұрын
very cool. those welds hurt.
@callumnash3236
3 ай бұрын
I have some reservations about the design of the headset. By welding the steerer tube onto the two bent tubes that form the front triangle of the frame, your relying on the stregnth of that weld rather than the strength of the tubing. Moreover, having a bolt do the job that a bearing might do within that steerer tube means that the strenght of that front triangle is just the stregnth of that bolt. The flat plates that form the upper are lower crown of the fork are also a little less burly than one would expect (they are solid machined peices even on mountain bikes and this can go a lot faster), and they only weld to the interior of the fork leg, not all the way around as they do on most double crown forks. So there's lots of parts can can fail there, and the result of any of these failures could be the entire fork assembly collapsing towards the rider. There are some ways you could use a little extra butting to stregnthen that weld, but ultimately you have to be confident in that m10(?) bolt, and whilst you might have got an milled steel (or otherwise automotive standard) bolt, someone copying you might use a cheap nickel one which don't last long even with furniture. And chances are this person is going to hit a speed bump at high speed. If you have the plates that do as crowns surround the fork legs, and weld a smaller tube onto them that can sit within the steerer tube, and therefore stop the plates departing from the forks should that bolt fail, and then add a plate that can do as butting going from the side of those bent tubes that form the front triangle over the steerer tube, that might help reduce the chances of a catastropic failure there.
@tylermemyselfandi8077
11 ай бұрын
When making soldering joints stagger the splices takes up lesser room and doesnt bulge up or chance to arc across
@davidaslan4375
3 жыл бұрын
I love your style of making videos and I would thinnk you'd do the community a huge favour if you did a detailed video on how to solder on new components and cable adapters with 1 or 2 practical examples plus some safty tips.
@spyderman478
3 жыл бұрын
Broooooooooo loved it. I want one 🤩🤷🏼♂️🤣😂 30+mph would be sus AF but also just as fun. The battery is nice props to the builder. Can't wait to see what you come out with next.
@MarbleTL
2 жыл бұрын
It is very interesting, you can really tell you are the new generation, I wouldn't have a clue how to setup an electric motor controller but you guys cant get a drum brake to work...
@drmh9041
Жыл бұрын
great video. I am converting a "1970's Skat Cat" mini bike myself. It has front and rear suspension and larger tires and wheels and typical motorcycle style brakes. We are going to use disc brake system for improved braking and for comfort and safety. Your video explains, in detail the necessary components, for a fully functional e mini-bike. This knowledge can be used for building other electric conversion. How about doing a small outboard motor conversion next?? One suggestion , why not cut the unused right side shaft on the motor. It seems that it could pose a hazard in the event of unforseen contact with a boidy part. Look forward to your next project.
@DIYesk8Builders
Жыл бұрын
That bike looks super cool! The suggestion about the motor shaft is a good one. This is something that we very much need to do for safety - you are absolutely right! Thank you :)
@guppi277
11 ай бұрын
Killer design. By far the most sexy looking bike. Shame this vid caught my attention after two years.
@Huntnfool
11 ай бұрын
Great creativity and build! I'm not sure those welds are stronger than the duct tape though 😅 just practice 😊
@RGary_Hall
2 жыл бұрын
Your welding worries me a bit. Keep an eye out for cracks, especially since you don’t have suspension on the bike. Also: a dirt guard in front of your motor will extend its life, as well as a bearing in the back side of the motor shaft to balance the torque from the sprocket. Nice work. 👍
@DIYesk8Builders
2 жыл бұрын
Thanks you the tips! We always love hearing feedback :)
@fartboobs
7 ай бұрын
Man I miss Oregon! Great bideo btw.
@kevinwei8943
3 жыл бұрын
In China, riding an electric bicycle is more convenient than driving, because it is too crowded everywhere in China, there is a large population and every family has a car, so if I don't go far, I like riding an electric bicycle.But China's electric bicycles look like this
@robinblackman4509
2 жыл бұрын
👍Pukka......I just put a chain tensioner on mine ....... smoother and quiet chain.
@RobbiRocks
3 жыл бұрын
Amazing modern version of the old 60s/70s Taco bikes.. Where can one purchace one or similar of these new legends?
@mountainlion4853
Жыл бұрын
Great job young man, try to slow your spray speed down and you will get a better result 😉
@DIYesk8Builders
Жыл бұрын
Thank you!
@3dartstudio007
3 жыл бұрын
Just a word of caution... If I'm understanding the new brake system... If anything happens to the chain or controller, the bike will have no brakes? Um... Might wanna have a mechanical backup of some sort. It's a cool project, I haven't had anywhere to ride a mini bike since the 80's but those things were SO much fun. Cheers!
@DIYesk8Builders
3 жыл бұрын
Yes that 100% needs to be addressed soon. It is a real hazard
@whyldthing86
Жыл бұрын
A 3D printed cover for the outrunner motor would make it “safer” for the rotating motor shell.
@DIYesk8Builders
Жыл бұрын
In the works for the next one!
@Killedbycotton
8 күн бұрын
Them nuts that you welded and then jb welded the battery box on would have purely been held in by just tension from tightening the bolt
@jango3157
3 жыл бұрын
I will follow your journey with this mini bike.I hope someday you can travel with it from Nebraska to Aspen.
@robinblackman4509
2 жыл бұрын
Lovely 😝...... shame the cables not hidden...... cables covers or tubing or conduit....
@DIYesk8Builders
2 жыл бұрын
For V3 :)
@robinblackman4509
2 жыл бұрын
@@DIYesk8Builders don't know bro.....all looks pukka . Just a bit of cable tidy on those wires ....... I'd buy that for 2 grand
@reygeronimo212
Жыл бұрын
Good job amazing
@frenzees3274
3 жыл бұрын
Now I want to make a mini bike great vid!
@MrCarmelo1959
2 жыл бұрын
Awesome great job
@suryakantpatil1982
7 ай бұрын
Nice work bro electronic very nice n easy to install
@DIYesk8Builders
7 ай бұрын
Thanks!
@rubenjohnparreno4817
2 жыл бұрын
suspension fork ang put short shocks on your seat for more comfort.
@itchsan
2 жыл бұрын
Love your content and quality video
@DIYesk8Builders
2 жыл бұрын
Thanks!
@itchsan
2 жыл бұрын
@@DIYesk8Builders I want to make a mini bike too but I have to save from my pocket money, I don't know how long it will take but I'll try
@pancudowny
2 жыл бұрын
Open space = Battery space!😉
@howiekearney
2 жыл бұрын
Before welding metal to metal you need to strip the paint off of both surfaces. Not only will it look much better, it will be much stronger.
@DIYesk8Builders
2 жыл бұрын
We did this but did not show it :)
@heydonray
11 ай бұрын
A+ for ingenuity. D- for the welds though! (PS, I also suck at welding)
@DIYesk8Builders
11 ай бұрын
Haha good thing I wasn't actually the one who did the welds then!
@neilanthonytijing3663
3 жыл бұрын
Try to put a cover on the motor and chain. Hope it will reduce noise and protects your legs if ever the chain snaps
@DIYesk8Builders
3 жыл бұрын
We are planning to do this on V3
@brunoh45
3 жыл бұрын
Nice project. What are the specifications of the motor you used?
@brunoh45
Жыл бұрын
@DIYesk8Builders. nice fake 🤦🏻♂️
@jakerock_
3 жыл бұрын
This is exactly the video I was looking for. Thank you/subbed
@Everything13ish
2 жыл бұрын
I used this motor (after waterproofing it) for my efoil, migh have to buy another for this kinda project!
@DIYesk8Builders
2 жыл бұрын
It is powerful!
@sanjayabale
3 жыл бұрын
Super detailed video , Thank you
@Dragoninja833
2 жыл бұрын
Learn to weld! You'll use it a million times over your life if you plan on continueing this awesome hobby! It's great someone helped with with the welds but you'll do a better job if you learn to do it yourself! Awesome bike! I want to build one now!
@DIYesk8Builders
2 жыл бұрын
Thank you! We definitely will!!!
@Rank-Amateur
2 жыл бұрын
Also, you could use a better understanding of the electrical side of things. The rating of that box is now (officially) IP00. It looks like it should keep some dust out, but definitely don't let the box get submerged.
@austinnguyen6538
3 жыл бұрын
Top speed?
@forreview1717
3 жыл бұрын
Great work! The chain and motor could have some covering to prevent possible accidents involving fingers, burns etc...
@DIYesk8Builders
3 жыл бұрын
that would be a good idea!
@OPM6906
Жыл бұрын
Wow. Just incredible. I have a dumb question though. What's the reasoning behind the motor end having less teeth than the wheel? On bicycles isn't it the other way around. Thanks
@DIYesk8Builders
Жыл бұрын
Thanks! More torque this way!
@OPM6906
Жыл бұрын
@@DIYesk8Builders oh yes, I completely forgot that! 🙈 But how does this config compare with sustained speeds in terms of efficiency? Thanks again for the reply
@tom0boi
3 жыл бұрын
Awesome build! Really enjoyed watching this, if you want a voltage and speed meter you could always get a Bluetooth adapter and the VESC app and mount your phone to the bars.
@DIYesk8Builders
3 жыл бұрын
I was thinking the exact same thing! We are going to try and do that. Only issue if plugging the module into the VESC as the UART port is already consumed by the ADC inputs
@tom0boi
3 жыл бұрын
@@DIYesk8Builders ah yeah I think you would need a spare Rx & Tx port
@DIYesk8Builders
3 жыл бұрын
Yeah I believe so. Maybe I could make a harness that adds them in parallel to the ADC inputs but I'm not sure is that could have an impact on the throttle functionality
@justinsliker6995
3 жыл бұрын
Should have used that grinder to smooth out those welds, would make for a factory look.
@DIYesk8Builders
3 жыл бұрын
They definitely could have used more grinding yes
@kfrey1
2 жыл бұрын
Regen braking, headlight, taillight and brake light. Taller wheels will smooth out the ride but your frame might not accept them.
@DIYesk8Builders
2 жыл бұрын
They do have an option for some bigger wheels! Those are good additions
@Rav3nclaw43
8 ай бұрын
If you take your time with the welding it wont look like that. Tight weaves, slow pace. Slow feed.
@jlawlar
2 жыл бұрын
Also if your chain broke you don't having any brakes, this happens a lot on mini bikes. I would like to see a Baja version of this bike, bigger motor and more batteries.
@user-os4fl4zj7d
Жыл бұрын
shoes.
@allthingsawesome8298
2 жыл бұрын
Version 3: shaves legs for extra top speed.
@spaideri
3 жыл бұрын
Does the motor mount flex? Personally I would support the motor from both sides since it has an unused shaft just waiting to be supported on the other end.
@DIYesk8Builders
3 жыл бұрын
It's pretty solid but that is a good idea
@JerseyTom
2 жыл бұрын
it has no brakes if the ESC fails or comes unplugged? edit: nm you talked about it at 29:00
@DIYesk8Builders
2 жыл бұрын
Yep. Major flaw at the moment
@alfredgoeg
8 ай бұрын
Hey, i thinked about if you installed gears on it, then it will go faster.
@DIYesk8Builders
8 ай бұрын
Very true! I prefer the torque off the line though. I do not need to go faster :)
@alfredgoeg
8 ай бұрын
thanks for the answer :-)
@beratkoc3701
2 жыл бұрын
Do you have any plans as to custom build a motor mount and maybe somehow get rid of the axle that sticks out to the left of the motor. I am building a similar project and would also appriciate an update video about this ebike if you can.
@DIYesk8Builders
2 жыл бұрын
I have drawn up a custom motor mount a few times but never actually gotten in machined. We may decide to upgrade it in the future at some point.
@ss4goku9695
2 жыл бұрын
Chain alignment doesn't look so good at 26:11. Great build.
@johnholland3476
3 жыл бұрын
Wonder if put a alternator on other side of shaft would it keep battery topped off
@chikararexzpo
2 жыл бұрын
You should get another motor take advantage of the axle that is protruding from the other side two gears chain loop two motor together make it 14000w 🙃but idk where you going to put another battery and vesc🙃
@DuhRake
3 жыл бұрын
Such a clean build. Thanks for the video!
@colvinau1403
3 жыл бұрын
6:45 great design
@DIYesk8Builders
3 жыл бұрын
thanks!
@vullom29
22 күн бұрын
You posted all the parts except for the most important part. The design manual for the mini bike frame
@johnog8358
2 жыл бұрын
Only thing I think it's missing is a battery indicator on it like how much charge is left.
@DIYesk8Builders
2 жыл бұрын
Definitely will put one on version 3.0
@dr.chimpanz.1324
10 ай бұрын
Im really thinking of building something like this but im just wondering how much something like this would cost. I would probably cut corners like the battery pack holder.
@DIYesk8Builders
10 ай бұрын
Probably around 1400-1500 USD
@dr.chimpanz.1324
10 ай бұрын
@@DIYesk8Builders interesting. How much is each part generally.
@DIYesk8Builders
10 ай бұрын
Depends which part
@wolfiedavis4879
Жыл бұрын
May I ask what settings you used under the foc tab? Doing a similar project with the same motor and wondering what you used as it seems to work well. Thank you!!
@JohnSmith-mf6tq
3 жыл бұрын
Love the project! If you want to build one with suspension, I might know something helpful for you. I built a small dirt e-bike based on an X-Games MotoBike using a VESC6 and a Flipsky 6374, later upgraded to a Maytech 6396. It worked VERY well, but with many limitations due to the nature of the original bike. I'm working on version 2.0 now with a custom frame and REAL suspension parts, but the Flipsky 80100 I bought vibrates... a lot... The shaft has about 0.005" of runout on the far end, and it's out of balance by at least 4 grams. How smooth does yours run?
@DIYesk8Builders
3 жыл бұрын
Wow sounds like a cool bike! Have not had any issues in terms of smoothness with the 80100, but from what I've heard these motors seem to be hit or miss - some work well and others awful. I would love to see some pics of that bike!
@MrJasenstewart97
Жыл бұрын
I'm using a mongoose cx24v450 as a base bike and it's like the poor man's motoped! My current set up is only 48v 2000w (Mac 48v brushless motor paired to csc 48v 18fet controller) with a 30ah backpack battery but it handles the trails fantastically I don't have to worry about the motor being damaged as it's protected inside the rear swingarm and there's so much more potential for power with no need to modify the frame itself unless you really wanna squeeze a bigger battery on the bike itself. Even installing a bigger motor you just have to get a motor riser plate made
@hiltondrapery557
2 жыл бұрын
Excellent build guys. Very impressive. One question though? Because the battery is inside the box is there a problem with it getting hot when you charge it up? Also when you're sitting in the seat does the heat from the battery affect the rider? Can't wait for version 3.0 keep them coming!
@DIYesk8Builders
2 жыл бұрын
Thanks! There is no problem with heat when charging but when riding the esc and get a little warm
@azimalif266
2 жыл бұрын
Can you make a folding one? That can be carried?
@denizsaraev2220
3 жыл бұрын
Epic
@iheartgrinman
3 ай бұрын
Where'd you get the motor and how'd you know which one to get?
@DIYesk8Builders
3 ай бұрын
Flipsky 80100 Motor
@jonathanbrunache3848
2 жыл бұрын
I want to build something similar but the motor is instead 5500w from flip sky and it’s on a full bike with full functionality of switching gears paired with 48v battery do you think that it can do 40mph?
@user-gs9os8tp7y
6 ай бұрын
The links don't all work on the parts list, where could I find live links to those?
@DIYesk8Builders
6 ай бұрын
which parts are you interested in?
@XC797
2 жыл бұрын
Do you have a link of a more step by step description of how to hook up the electronics in a more detailed version for those of us that are not up to your level of electronic knowledge
@DIYesk8Builders
2 жыл бұрын
We unfortunately do not have a more detailed version at the moment. If there is enough demand we can make one though!
@XC797
2 жыл бұрын
@@DIYesk8Builders would you be able to tell me if the electronics / speed control company has a software tutorial RE for non techies . I admire your design of this mini bike and its the coolest most efficient one I've seen thus far.
@332ARA
5 ай бұрын
I have a bike I'd like to do this to. I was gifted an Onyx 72v 23ah battery. I don't know the series/parallel arrangement. of it . Think it'll work with that 80100 motor? Any recommendations? What does the 14S spec mean exactly?
@DIYesk8Builders
5 ай бұрын
That battery should work. 14s means that it has 14 battery cells in series
@332ARA
5 ай бұрын
So for the 80100 there is a limit # of #S cells? I don't know the composition of my battery. The bike it came out of was a 4000w. Will a 72v and 80100 be insane? Can I limit the power with the software? Do you still like the hardware choices you made? I want to put it in a Centaur Scooter (look it up) @@DIYesk8Builders
@TechGoop
3 жыл бұрын
Fantastic video guys and great explanation of each step involved! This really helps there's a lot of videos you see on KZitem for DIY projects tend to go really fast and skip the details. How is the mini bike as far as going uphill and torque?
@DIYesk8Builders
3 жыл бұрын
Thank you! Torque is amazing. Bombs up hills. We will have a testing video out soon showcasing what it can do!
@LeonHall-q9k
Ай бұрын
How much does it cost to buy one
@story4065
2 жыл бұрын
what dynamo is that, if you may know? 
@abandomedaccount2298
Жыл бұрын
Hi can yous add screens for mph with these controllers ?
@DIYesk8Builders
Жыл бұрын
We are planning on this
@RBEMotion
3 жыл бұрын
Nice video! I get where you're coming from with the GH connectors on the MakerX ESC, but at the same time, they have the major benefit of being locking. In this circumstance with high vibration, it makes sense to have locking connectors. I can understand it being annoying to solder all the wires, but with MakerX, usually they provide all of the connectors, so at least you didn't have to go buy them specifically for this. In addition, you could probably get away with a higher battery - regen if you want some harder brakes
@DIYesk8Builders
3 жыл бұрын
Hi man! Thanks :) Yes the GH connectors are annoying to solder but that is a great point that they lock. Personally, I would just prefer the standard JST on most VECS based ESC's. We are actually making a review on the HI-100 at right now and it's probably the only thing that I dislike about it - though we did touch on the fact that they include all connectors. We did up the battery regen for stronger brakes least week and it has made a worlds difference. I'm excited to see some of your upcoming esk8 content!
@RBEMotion
3 жыл бұрын
@@DIYesk8Builders Here's a couple other things for you! I suggest implementing a MetrPro CAN in conjunction with a DaVegaX screen. It would be absolutely perfect for this setup and I think you could come up with a good way to mount the DaVegaX onto the handlebars. In addition, you'd get the ability to track your stats of your rides in the MetrPro app. In my video on the DV6, I showed how the Metr app works a little bit, and it's super helpful to have around. If you use it just give me some idea credit ;)
@RBEMotion
3 жыл бұрын
@@DIYesk8Builders Thanks for that! I've got another battery video coming out this Friday, and a whole long list of videos planned, just cranking through them one by one. Gear reviews, comparisons, wheel reviews, a short board build, and even an upgraded floatwheel-style build as well.
@DIYesk8Builders
3 жыл бұрын
I was actually just looking at the METR after watching some of your vids! The DaVegaX looks super sick and could actually be the solution. I'm not sure how it would connect though with the ADC inputs already using the UART. I looked on their site and saw that it uses 3.3/GND/TX/RX. I suppose I could add a third wire going into the 3.3 and GND in parallel to both the ADC's but I'm not sure how great of an idea that is. Maybe I could 3D print a mount for it to fit on the handle bars too....
@DIYesk8Builders
3 жыл бұрын
I'll be lookin forward to watching them! The quality and detail on your vids is always amazing
@danielvr9574
3 жыл бұрын
how fast doeas it go????????
@DIYesk8Builders
3 жыл бұрын
34.8 MPH
@Microplastic_Therapy
3 жыл бұрын
Lots of room to put a big battery I would upgrade to a 10kw motor and a thiccc battery
@andywright6713
3 жыл бұрын
@Simon Солома, I agree or add a second battery pack above the motor.
@dallasfights9439
15 күн бұрын
Can you redo the parts list
@rmerrell
Жыл бұрын
Sweet build! A friend and I are starting our own. Where did you get your final Sprocket? The one in the parts list doesn't fit the Flipsky 12mm motor shaft. Can't find anything with the right specs online.
@DIYesk8Builders
Жыл бұрын
It was really hard to find one that fit. I can't exactly remember where we found the one that ended up working. We ordered 4 before we found one that worked
@IdahoEagle77
Ай бұрын
For $1300, wouldn’t one just buy a good motorized one? I would worry about the high electromagnetic fields coming from the battery between your legs. I work in the tech field and test for these. Some serious hernia and cancer-causing fields there.
@jeffrey769
3 жыл бұрын
What would you need to do in order to make the bike go like 80 mph
@zogworth
2 жыл бұрын
80mph would need a lot more power but should be able to get to 50-60 with a smaller gearing and trying to tuck as aero as possible.
@AKCALL-hu6ln
11 ай бұрын
clean bike bro whats the top speed
@DIYesk8Builders
11 ай бұрын
Thanks! 35 MPH
@hotroddinlogan1043
2 жыл бұрын
How much did the whole project cost? This would be awesome to try on my 70s sears roper mini bike
@DIYesk8Builders
2 жыл бұрын
Cost was around 1500 USD because the frame was so expensive.
@josegil3782
Ай бұрын
How much $ did it cost to build it?
@funnyprojects7330
Жыл бұрын
Hi,you make this mini bike body form yourself?
@DIYesk8Builders
Жыл бұрын
The frame came from gokartsusa. The link should be in the description
Пікірлер: 280