This is the most unbelievable build I've ever seen. And I don't just say that based on the speed. Each component selection is just well thought out and purposeful. Really well done. Those vendors should be all over this paying you to promote.
@E-bikeguy
Жыл бұрын
Heck yeah I wish tho lol thank you💯👊
@LowestDifficulty
Жыл бұрын
you got the some of the best ebike videos on here man
@E-bikeguy
Жыл бұрын
Thank you 😊 much appreciated
@darwin.portman
Жыл бұрын
Great video...thanks.
@noctv6809
Жыл бұрын
I was asking about the parts yesterday... this video just popped up! You answered most of my questions in the video. The parts are more expensive than I was thinking... I'll budget $2500-$3000 for my project, but I'll probably use an old hybrid road bike, if the motor will fit in the dropout.
@E-bikeguy
Жыл бұрын
Oh ok, if you build it yourself. Than it would be in your budget
@aaron092000
Жыл бұрын
If you carry on doing these videos I'm sure you'll have 20k subs in 1 year!
@E-bikeguy
Жыл бұрын
Ok well I really wasn't in for that but it will be nice to get know lol
@cedricwebb5576
Жыл бұрын
I love your videos Sir. Thanks for the knowledge.
@E-bikeguy
Жыл бұрын
No problem, thank you 😊
@ivanfranklin9167
Күн бұрын
Love your build looks great and low key. Don't need to turn the enforments head right!
@JohnDoe-gn5bc
Жыл бұрын
Over 60 MPH on a bike!! Bro, that is F'n Fast :) Thanks so much for the incredibly detailed video walk through to show us the components you chose. I think you built a great stealth vehicle that is capable of incredible speeds. I love it!!
@E-bikeguy
Жыл бұрын
Thank you, we'll my buddy rode it for a top speed run he saw 72mph on the display 😳
@JohnDoe-gn5bc
Жыл бұрын
@@E-bikeguy 72 mph, crazy fast! Did he leave his hand impressions in the grips permanently lol? :)
@E-bikeguy
Жыл бұрын
@@JohnDoe-gn5bc lol he told me that it was dangerous lol and he loves it so now he want m3 to build him one
@buffalomind6838
Жыл бұрын
Thank you, that was excellently detailed. I’m salivating at the thought how my bike will feel when I seriously upgrade it. The build was expensive *relatively* But the Greta thing is if you were to buy a prepare bike anywhere near this level of performance you’d be paying 2x the amount. And come to think of it I don’t think there are bikes out there that are *normal* size that are sold without being as you stated enduro wide/dirt bike’ish that call unwanted attention from cops & possible thieves. Most people will think it is at best a 500watt ebike that doesn’t even cost half the amount it actually does when you build it oneself.😎
@E-bikeguy
Жыл бұрын
No problem I just thought if anyone want some really capable and cost half the price this is the best option as far as hub drive goes
@leoelegado
5 ай бұрын
Well said!
@Artoflife-wn4rv
7 ай бұрын
GOOD JOB BROTHER. THANKS FOR THE INFO. RESPECT 💯
@E-bikeguy
7 ай бұрын
Thank you😁💯
@younge2386
Жыл бұрын
my fav ebike youtuber
@E-bikeguy
Жыл бұрын
Heck yeah, Thank you!!
@user619tlsdca5
Жыл бұрын
Cool Display! My DIY kit builds controller do not have the connectors. Cheaper to buy kits without displays but didn't know not every controller universal of adding on LCD display. Must have LCD on label specs
@johndoe-sz4iq
2 күн бұрын
Great Job! Ignore the Haters they hate it's what they do! They like to tear down people so they feel better I Guess!!!
@xrayesel1180
Жыл бұрын
Good video. Thanks for the advice
@E-bikeguy
Жыл бұрын
Thank you, I want to see if anyone take my project and build them a monster lol
@EBikeBuilder_
Жыл бұрын
I did a few builds on Walmart bikes they work fine. It’s the assembly where they fall short. They come with very little grease and incorrect torque. Gotta give it a once over specially the bottom bracket, headset, and the cups/cones on the hubs if they are loose ball bearing. That’s usually the weak point of the bike them loose ball hubs, but if you are doin a hub motor build then you are gettin rid of one of the wheels anyways.
@E-bikeguy
Жыл бұрын
Yes you have to check and double check all bolts and stuff lol
@johnw614
7 ай бұрын
You seem to have general knowledge of each of your components that each of us find hard to get. Would you do a set of videos, like one on wheel/hub motors, maybe tell the difference between the series like 4t 5t or whatever you mentioned, maybe one on controllers, say each Sabvaton series, all in their own video comparing each, maybe one on batteries, same kind of thing? Your explanations are clear an to a layperson that makes what you are saying easy to understand! With affiliate links, or even a ebike dealership, seems you could go into ebike component sales pretty easily. Keep up the great videos! Thanks a bunch for the thorough explanation of your build!
@E-bikeguy
7 ай бұрын
Ok thank you, you definitely gave me some great ideas for so.e topics I'll start doing some soon
@Michiganwatch
Жыл бұрын
You have a sweet build though
@andi4281
Жыл бұрын
Whatch out! An 🐘 is stealing your food!
@miningking70
Жыл бұрын
The Force is strong in you! Thank goodness for your knowledge! I want to upgrade my 48 volt to 72 volt! Love your set up! Jesus is Lord!
@E-bikeguy
Жыл бұрын
Thanks for the support ill always try to make good content and help anyone out who needs some advice
@Re-cycles408
6 ай бұрын
Great build ❤❤❤
@E-bikeguy
6 ай бұрын
Thank you💯💯💯👊🏿
@cocoabiscuits
5 күн бұрын
Thank you for the walk through. Seems more hassle for me to build than what it's worth I'd mess s few things up and it would be a paper weight to me as i would give up trying to troubleshoot the issues. So much can go wrong 😢
@E-bikeguy
5 күн бұрын
Yes a lot of people just one off the floor lol
@stxrobstar
8 ай бұрын
Very inspirational vid good sir. 👍I'd love to see what you could do with an EUYbike S4.
@E-bikeguy
8 ай бұрын
Thank you 💯 but yes, let me look into that ebike
@stxrobstar
8 ай бұрын
@@E-bikeguy Keep on keepin' on. I've been bingeing your channel hard. 😆
@johnw614
7 ай бұрын
Nice build! You could do affiliate links and make a little $$ with what you have done! I have an old Rock Hopper frame with front suspension that I would love to convert. Would you send or post a part list?
@starcitizenmodding4436
7 ай бұрын
Great Videos.Subbed. What would you do to this if you wanted more acceleration and was willing to sacrifice top speed?
@E-bikeguy
7 ай бұрын
Thank you, well you can go 5t motor and that will get more acceleration .
@londonglasgow2145
22 күн бұрын
maannn lemme go ahead and open one of those funky credit card letters they keep sending lol
@E-bikeguy
22 күн бұрын
Lol heck yeah bro 👊🏿 💪🏿
@rmack3481
Жыл бұрын
Nice bike R
@E-bikeguy
Жыл бұрын
Thank you
@cybrwerks
Жыл бұрын
i just built a 23s10p, 96.6v 26.2ah with tested recycled cells and a 0.5ohm 193a bms just tested working last night, passed charge test went from 86.7v to 94v in about an hour and 45 minutes, at 7amps. im excited to get it out on the "trail"
Would love to put an ebike kit on my mountain bike, but I no nothing about electrical current, etc. I applaud you Sir. You saved a grip of money.
@E-bikeguy
Жыл бұрын
Thank you, if you need help I'm here to help out
@jasweb147
Жыл бұрын
@@E-bikeguy My BB is a pressfit 30, can a mid drive install on my BB type?
@E-bikeguy
Жыл бұрын
Good question lit me do a little more research, do you know what type of mid drive you want to get?
@jasweb147
Жыл бұрын
@@E-bikeguy Bafang 1000w BBSHD. I have a Niner SIR 9
@E-bikeguy
Жыл бұрын
I might be wrong but you might have to take the pressfit out and make spacers out of pvc to take up the play on the mid drive or I think they make a adapter
@0ffGridTechClub
7 ай бұрын
🔥🔥🔥
@carltonboswell1184
7 ай бұрын
I love your Ebikes What's your prices and how can I get o ne I have three of them but I need more range.
@E-bikeguy
7 ай бұрын
Lol thank you, that bike in particular I can build one for 2,800
@Sunrise_Sunset355
Жыл бұрын
I would like to see you build a ebike on a small bmx bike for us small tech guys ✌🏿
@E-bikeguy
Жыл бұрын
My sons has something similar I'm going to upgrade it soon and have a video out but I'll do put something like that together
@Michiganwatch
Жыл бұрын
Hell the police will think I'm Batman soon as mount a jet engine on the back of my bike. Almost there waiting on parts.
@E-bikeguy
Жыл бұрын
Lol that's what I'm talking about 😎
@jakegreenwald469
13 күн бұрын
I built your Tommy bike for 1500! The trick is buying used cells on battery clearing house! Built a 84v 40 amp hour battery for 250! How long it will last will find out! Lol
@scottrocks1993
Жыл бұрын
I wish I could show you one of my homemade ebikes. That only cost me £400 to build for everything. 2000w 84v Mid Drive system with 3000w controller. With 12 speed at the back It's very powerful Only has a 20s 7p Battery Park. It is a scott racing bike converted into a mountain bike With air shock suspension Good hydraulic brakes And a lot more
@E-bikeguy
Жыл бұрын
Wow I bet she looks nice, do you take it off road?
@bindingcurve
Жыл бұрын
Trolling
@Michiganwatch
Жыл бұрын
You be careful down there in Florida I know that hurricanes coming in
@E-bikeguy
Жыл бұрын
Thanks we made it through the hurricane but it was pretty bad out there loss a few chairs tho but I'll find them.lol
@fizzyboi4070
Жыл бұрын
could you drop a link for the freewheel you used, because 7 speed doesnt fit in my frame
@E-bikeguy
Жыл бұрын
US $7.80 | Single Speed Freewheel 12T/14T/16T Steel Bike Bicycle Flywheel Cycling Accessories a.aliexpress.com/_m0zLJLQ
@Mash3OH3
8 ай бұрын
I wouldnt even think about getting a motorycle anymore after riding and experiencing my first home made electric bike. I never looked back.
@E-bikeguy
8 ай бұрын
Same here I don't even ride my avts I got in the back yard lol
@marthamryglod291
Жыл бұрын
About the front fork: I had a entry level sr suntour and just upgraded to entry level rock shox I think they're called silver. Big big improvement and they don't cost much. I think $210
@E-bikeguy
Жыл бұрын
Send me a link
@dhaze4368
Жыл бұрын
I also converted from SR Suntour to RockShox with my XCM 30 after 5 months of play in the guide bushings the upgrade coast 180euro
@dhaze4368
Жыл бұрын
and i drive a bbs02 750w
@marthamryglod291
Жыл бұрын
@@dhaze4368 yikes. Did you have the forks worked on in a shop?
@dhaze4368
Жыл бұрын
@@marthamryglod291 no, i replaced it myself
@mantraexclusive-less2376
Жыл бұрын
It would be nice to know how fast your bicycle goes on mode 5.
@E-bikeguy
Жыл бұрын
Man I guess in 5he hi 60s low 70s ill have to dress for that.
@kenney5454
Жыл бұрын
@@E-bikeguy I cracked up when you said @ 23:18 " An don't even ask me what zone 5 is cuz, haven't even went there yet! I'm too scared to even try!" LOL Now that's a honest man I said " need one of your set ups too, some day soon, thanks for posting
@user-dx5bu5tu3s
5 ай бұрын
Hello E-bikeguy I need bit of advice, I have 2000w mtx kit, 60v 20ah battery the continuous current is 50bms and peak 150bms, my controller is 45a but I'm looking to get a 80a controller would my battery be OK? I don't know which bms to stay below, is it the 50bms or the 150bms? On most batteries it gives 2x bms ranges, continuous bms and max peak bms which one do I keep controller peak amps below? Thanks
@E-bikeguy
5 ай бұрын
To answer your question you will be fine with the 80a controller
@Michiganwatch
Жыл бұрын
My build is part of my bucket list before the whole world goes to s***
@E-bikeguy
Жыл бұрын
Lol ok so what bike you going to put your kit on?
@ash0787
Жыл бұрын
its aluminium or steel frame ? you not worried its going to break ? after having 3 or 4 ebikes im thinking of making something similar but I already have QS205 and its a HEAVY motor compared to the usual 1500w mass production ones, I want something lighter as I don't need the capability to do 12KW on a mountain bike. I want my bike to be able to do at least 70 miles range though because on stealth bomber I only get about 60 miles range when going really slow.
@E-bikeguy
Жыл бұрын
Yes I was thinking that the aluminum frame would be too weak. But it's been holding up pretty well, the qs205 is heavy but lighter than the 273 but also you have a 2000w and 3000w motors which is lighter than the qs205.
@ash0787
Жыл бұрын
@@E-bikeguy I see you got 2 bikes that are similar, are they both using the same motor ? yeah I want something light thats at least 2.5kw because I don't think I will notice much difference going from 1.5kw on my old bike to 2kw. I've seen that UPP makes triangle batteries that can go up to 3KW, not cheap though.
@E-bikeguy
Жыл бұрын
Yea my son's is 3kw bike we both have sabvoton controller and going for 1500 to 2.5kw will be a noticeable improvement not kick you butt feel. But you will feel it in torque
@E-bikeguy
Жыл бұрын
Get your battery on ali express much cheaper Get it from the same supplier as I did
@Sunrise_Sunset355
Жыл бұрын
So you spent around 2500$ for the ebike build to my calculations, which is great. Am I close to that calculation. I would love to learn from you
@E-bikeguy
Жыл бұрын
Yeah it can be cheaper if you keep it stock and get the axum without the dropper post so around 2200$
@cameron1123
3 ай бұрын
Yoooo how much would you charge if you made me an electric bike like yours
@E-bikeguy
3 ай бұрын
Email me at theebikeguy08@gmail.com
@dcryder9736
Жыл бұрын
I saw where the controller has a dedicated e-brake throttle so you can use variable Regen brake on a thumb throttle. I saw you can only set up those options through the PC, not Bluetooth. Do you plan to check that out?
@E-bikeguy
Жыл бұрын
Yes I'll definitely check it out tonight
@dcryder9736
Жыл бұрын
@@E-bikeguy I got my kit with the Sabvoton 45a controller. It doesn't have a connection dedicated to e-brake throttle, so no variable e-brake. I'm guessing you can get e-brake to kick in when your low brake cutoff switch is tripped? I'm guessing you can set it to however strong you want? Would be nicer to have variable, but hopefully I get something. I'm still waiting for battery 😪
@E-bikeguy
Жыл бұрын
Yes you can set the ebrake at 40a it will still charge the battery
@E-bikeguy
Жыл бұрын
You can also set it to come on when you release the throttle also
@jamesbarber8308
8 ай бұрын
Most of the battery’s I’m looking at say they only have a 50a BMS even know they are 40AH or more does that matter ?
@E-bikeguy
8 ай бұрын
Yeah, definitely it matters a battery is made from a factory with a small Amp bms means the cells are really not that good or the nickel strip are thin and will burn up if you bypass the bms.
@dcryder9736
Жыл бұрын
I just bought a Schwinn Axum non-DP for $228 from Wal-Mart. My 2000w kit from NBPOWER should be here this weekend. Couldn't pass up the price on the Axum. The kit is 135mm dropout and was wondering if there is any issues with Axum's 141mm dropout? What u think?
@E-bikeguy
Жыл бұрын
Might just have to add a few washers but shout go on smoothly and the 2000w and 3000w have a 135mm drop out and it depends on what freewheel you put on
@E-bikeguy
Жыл бұрын
I just your reply on that stuff that cool the motor I when on the link you sent me I'm definitely getting some this week
@dcryder9736
Жыл бұрын
@@E-bikeguy yeah, the results from his experiment speak for themselves. I ordered from Amazon and it won't arrive until between October and November. That will give me time to dial it in before I push the motor. Reminds me of the CPU overclocking days 👍
@E-bikeguy
Жыл бұрын
Lol yes I'll get some for both bikes
@alainalvarez.
Жыл бұрын
Were we could find you on Facebook ? I want a good setup in a 29er onyx cruiser bike
@E-bikeguy
Жыл бұрын
I have a group called ebike life east coast you can get in touch with me there
@jonezdatonetech2758
10 ай бұрын
Nice work bro, I have the sabvaton 72/200a, Can someone please show me how to add reverse feature to my e-bike ?, even though I don’t have reverse plug on my controller or the learning wires.
@E-bikeguy
10 ай бұрын
I'll hit you up tomorrow and show you.
@jonezdatonetech2758
10 ай бұрын
Yes sir no problem, I will be ready 😊😊😊
@jonezdatonetech2758
10 ай бұрын
Are you ready to show me brother ?
@E-bikeguy
10 ай бұрын
@jonezdatonetech2758 soon as I get home, my bad
@jonezdatonetech2758
10 ай бұрын
Oh okay thanks for the heads up, I’m not rushing you, I’m just excited and anxious about the news 🗞️, lol 😝
@user-ki8by1gf3i
8 ай бұрын
How much would it cost to have you build a similar bike using an existing Bianchi frame I have (26”)? I have a seat suitable for it, but it needs everything else except, perhaps, the frame modification. Please include shipping charges from 14841.
@E-bikeguy
8 ай бұрын
All together either shipping will be 3,200, the battery will be molicel p42a cells
@travishenry6168
Жыл бұрын
did you have to grind away at the frame on the rear right? what is goin go there?
@E-bikeguy
Жыл бұрын
Where at you see on the rear right? If you talking about the rear derailleur, I just put a new hanger and weld it
@imho7250
Жыл бұрын
The only problem with these ebikes is getting caught in the upgrade death spiral. 1000w is good so 2000w is twice as good. Oh, now my 30a controller cant give me peak power so I’ll buy 80a controller. Oh no, now my battery can’t supply the amps i need so ill get a bigger (heavier) battery. Hmmm, need 5kw motor. Oh no, now i need 10 kw controller. Oh my BMS tripped on over current. Bypassed. Browses QS motors, see’s 8kw motor. Searches for FarDriver ND72850 controller (450 DC amps). Buys second 200a battery, wires it in parallel with first battery. Finally $100 frame snaps in half. But seriously, this is a great hobby to get into and can be as cheap or as expensive as your budget supports.
@E-bikeguy
Жыл бұрын
You right about the upgrade frenzy I went through it just as you explained lol, but this is all I need in a bike if it ain't broken no need to fix
@hamdisel1
4 ай бұрын
What battery did you use or is it a built battery ?
@E-bikeguy
4 ай бұрын
It's a 72v 40ah battery I brought on aliexpress but I did modify the battery tho
@ebikeengineer
Жыл бұрын
Could you add a link to those hydraulic brakes with the ebike sensor line?
@E-bikeguy
Жыл бұрын
US $25.84 32%OFF | 4-Pistons E-Bike Electric Scooter Hydraulic oil Disc Brake 900mm 1550mm 2300mm Power off cut-off brake For KUGOO Booster ES3 ... a.aliexpress.com/_msw4nZs
@ebikeengineer
Жыл бұрын
@@E-bikeguy that's awesome! Thanks! They even have the water proof connectors! Score!
@paronormalactivity
Жыл бұрын
Hi where did buy your conversion kit from? What company?
@E-bikeguy
Жыл бұрын
I'll send you the link
@E-bikeguy
Жыл бұрын
US $363.09 9%OFF | Sabvoton 72V 80A 100A 150A 200A V1 V2 Controller Kit for 3000W 5000W 8000W 12000W Ebike Motor Kit with UKC1, Bluetooth, Alarm a.aliexpress.com/_mODAoNw
@paronormalactivity
Жыл бұрын
Cheers Mate.
@beaubridgeman5522
5 ай бұрын
I have adhd... was there ever a price for build or build list?
@E-bikeguy
5 ай бұрын
I have 1,700 invested in that bike I have a inventory list of parts I built for a customer on my channel
@alitoroganan2442
5 ай бұрын
What's the specs of the battery, whats its continuous output, thanks bro
@E-bikeguy
5 ай бұрын
It's 72v 35ah 220a max
@alitoroganan2442
5 ай бұрын
@@E-bikeguy omg 220,helluva battery bro, Do you still remember while doing some power runs, on what watts was the motor putting out and the amps
@dcryder9736
Жыл бұрын
Does your battery have a BMS? What normal amps BMS put out?
@marthamryglod291
Жыл бұрын
His battery is 72v 40ah and I think it's a 80 amp BMS
@E-bikeguy
Жыл бұрын
Yes but but somehow the bms was tripping around 60a I bypass it on discharge side
@marthamryglod291
Жыл бұрын
@@E-bikeguy I just ordered an 80amp 20s BMS from Amazon. It's the Daly. I'll think it's pretty reliable. I'll let you know how it works. Should be able to just plug in the balance wires that are already on your pack, and do a little soldering for the main connections.
@E-bikeguy
Жыл бұрын
@@marthamryglod291 ok ill be here just let me know how it turns out
@TheVincentHarker
5 ай бұрын
Do you ever do builds if someone were to pay for materials and labor?
@E-bikeguy
5 ай бұрын
Yes I do, email me at theebikeguy08@gmail.com for more details
@btran3224
Жыл бұрын
could you share the battery link?
@E-bikeguy
Жыл бұрын
US $328.30 30%OFF | 72V 40AH Triangle Bag Scooter Electric bicycle lithium battery 2000W 3000W 72V Battery Pack a.aliexpress.com/_mq850SY
@HH-zh9iw
4 ай бұрын
Im definitely building a replica
@HH-zh9iw
4 ай бұрын
Unless you Wana build it for me??
@Artoflife-wn4rv
7 ай бұрын
DO YOU EVER TARE UP SPOKES ON THE WHEELS FROM ALL THAT POWER?
@E-bikeguy
7 ай бұрын
No. I never had a spoke pop on me,
@zippys6329
Ай бұрын
bro i have like 1200 lipo 18650s that ive salvaged ill give you half of them ...plus free streaming and ppv for life if you help me speed up my aventon level 2 commuter... i live in clearwater fl...
@zippys6329
Ай бұрын
i want to keep the torque sensor and go maybe 65 70 tops
@blaircraig6530
11 ай бұрын
you didnt say what the motor watt was or battery size your using???
Hi from Melbourne 😂 I have a 500W bafang hub motor rear hub motor 48volt x 2o amh I'm going to sell it I want to buy the motor and control and a 60 volt x20 amh but the battery pack is so expensive could you give me some advice how to build .y own battery I will pay you some money.
@E-bikeguy
11 ай бұрын
Oh ok well I can send you some links,
@ebikeengineer
Жыл бұрын
That chain-slap issue you're having? In my last build I prevented it using this produce from Amazon:. ENLEE KRSEC Bike Frame Protection Tape Mountain Bike Protective Stickers. (Sorry can't link in the comments, but search using the text). Eventually the protective sticker wears out, but it's removable and you can put on another. I find the package has enough smaller stickers that you can have replacements for a while.
@E-bikeguy
Жыл бұрын
I had a derailleur to prevent that but it's not working
@ebikeengineer
Жыл бұрын
@@E-bikeguy this stuff acts like ablative armor. It gives up it's existence to protect the paint underneath. I've used it on my daughter's build (500+ w) and I've got a set for my son's build (1200w). I may add them to my bike, but it's 30 years old and the paint is already chipped.
@E-bikeguy
Жыл бұрын
Nice!!!
@DrityRed
Жыл бұрын
What would you suggest I upgrade on my factory bike for more speed?
@E-bikeguy
Жыл бұрын
You can shunt mod your controller it's a free mod for more speed, but if you want to go into the 50mph territory then then a overhaul is in order lol what's your current setup?
@DrityRed
Жыл бұрын
Thanks bro really appreciate it, I got the Wallke H6 straight factory haven’t done anything to it
@E-bikeguy
Жыл бұрын
Nice you can definitely get more performance out of that bike.
@DrityRed
Жыл бұрын
@@E-bikeguy that’s what I figured 35AH Two batteries, it got to be holding back 31 miles
@E-bikeguy
Жыл бұрын
Oh yeah 😎 might to try a 60amp controller
@user619tlsdca5
Жыл бұрын
If you have not yet build s Dual Motor of using a Gear motor as the primary motor use with a 1500, 20000watt Gearless as a turbo booster, this set up will make e bike not only powerful but practical and energy efficient. Believe this set up is the best practical build for DIY projects. The total weight is not as heavy of using both gearless DD which are the heavier motors( mass weight of over 250lbs of rider and bike will stress ya brakes beyond the norm when over 24mph, dangerous if cable stresses of slipping when going downhill over ,24mph) over the gear motors and mid drives. You also do not have to install 2nd set of every accessories of using just the throttle bar and motor and battery cables(Gearless motors cut off of throttle) Display ok to add on if you need more then mph reading off of main display. The cruise control of gear motors is what makes using another gearless motor work together of being efficient of battery usage. This set up should be the Standard Set Up even in pro builds. Watched many DIY Duals and did not come across the set up Im using as the idea came from troubleshooting other ppl s builds of the obvious wrongs.
@E-bikeguy
Жыл бұрын
You do make good point awd ebike be very good in sticky situations but won't it be a lil heavy using two of everything?
@user619tlsdca5
Жыл бұрын
@@E-bikeguy Yes, it was the reason why I chose this set up as of watching other ppl s builds of mostly using 2 gearless 1500wstt and up with all the accessories added on. Seen builds when front forks bolt ends rip apart from the torque of using 2 motors along with the heavy weight of force when stopping. It's why I came up with the set up of using a 350 watt gear motor with 2000watt gearless but you can use smaller gearless motors in the 1000watt and under if you prefer. I'm only s buck 30 and e bike dual is only 79.,lbs. The weight is just right as not overkill for I would know having too much weight would not be practical due to bike s brake system along with the size of tired. If e bike over 100,lbs of the build it's best to use 3 to 4inch fat tires as tire pressure is part of the math of Duals.
@user619tlsdca5
Жыл бұрын
I'm on edge the tipping point of brakes. Any heavier of hauling my cargo will stress brake system. I do know I be replacing my pads more often.
@E-bikeguy
Жыл бұрын
Oh dang, with the sabvoton I have I put the ebrake at 40a and it works great, almost too great
@user619tlsdca5
Жыл бұрын
@@E-bikeguy you have e brakes? Didn't know e brakes fitted of e bikes. Certain controller off s moped scooter?
@rafaelkorova
Жыл бұрын
Dude look for a Mylo bike in US.
@albertsuruy9804
Жыл бұрын
How much does that setup will cost me
@E-bikeguy
Жыл бұрын
It depends on what power you want, price starts at 2,700 and it goes up from there. But if you build it yourself, about 2,200
@Michiganwatch
Жыл бұрын
As soon as I get it all together I will make a video on it for the test run just in case it's the last run 😇 and I'm not kidding.
@E-bikeguy
Жыл бұрын
🤣🤣🤣🤣🤣 naw you'll be ok can't wait to see it
@Michiganwatch
Жыл бұрын
@@E-bikeguy oh it's going to be badass just like a night of fire on a drag track with all the jet cars
@joeshmoe7967
Жыл бұрын
Not really an ebike in my terms, more like an emotorbike. I can tell by the gearing not much pedalling will be done. Would be a blast to ride, but I got my ebike to pedal, already have a motorcycle. Not sure I want that much power in a walmart bike, I would find a better quality used. Interesting, all the same. - Cheers
@E-bikeguy
Жыл бұрын
It's easy to pedal then you think, I thought that also, but not too bad. I haven't had no issues with the bike it self, I pedal a lot just to workout and just to have fun on some dirt roads and atv trails.
@marquismartin9558
5 ай бұрын
How much ro build 1
@E-bikeguy
5 ай бұрын
This one I can do for 2,800
@erpringle
Жыл бұрын
It's dangerous, its bad and it's illegal as hell. This is a perfect example of what is going to bring electric biking down and ruin it for everyone. Thank you very much.
@E-bikeguy
Жыл бұрын
For your information sir I mainly ride off road this is not a road bike by any means I have a car to take me place to place and my brakes are fine just because my bike can go way faster than yours doesn't mean I should so with all due respect you just worry about your neck of the woods and worry about mine I respect everyone around me when I ride!!! Good day sir!!!!
@axelthorfilms
9 ай бұрын
The only thing that will ruin it is people running lights, racing on city sidewalks and stunting on the city streets.
@jahjahsavewi6185
Жыл бұрын
If you got my previous text I deleted sorry did mean to send that yet but I do want to give you a bike to build for profit for you to have and then I can send you my bike so can build up my rad city power bike 2018 so send me your email please you just give away a 100 million dollar worth of game to the bike world my friend wooow!!!!
@E-bikeguy
Жыл бұрын
Ok it's jakoie08@gmail.com
@jahjahsavewi6185
Жыл бұрын
@@E-bikeguy cool
@Richierich1285
10 ай бұрын
so where did you get the battery and what voltages
@E-bikeguy
10 ай бұрын
On aliexpress, 72v do you want the link
@Richierich1285
10 ай бұрын
@@E-bikeguy yes and what about the computer on the handle bars
@E-bikeguy
10 ай бұрын
@Richierich1285 all from the same store I'll send it
Пікірлер: 217