Well done man! Amazing work, this content is unbelievably underrated
@LyndonsWorkshop
Жыл бұрын
@apollonpotoudis9337. Thank you. Just sharing my hobby to fellow creators out there.
@AlfieDoug
Жыл бұрын
Now build a table that doesn't wobble like a jelly 😁
@LyndonsWorkshop
Жыл бұрын
Yes. I finally got rid of that pvc table. 😂
@IN-GOD-WE-TRUCK-11
9 ай бұрын
Lol😅lol😅 u know u wrong for that one hahaahahahahah tooo funny
@Max-xx6lu
Жыл бұрын
It looks super Dope, well done
@LyndonsWorkshop
Жыл бұрын
Thank you. And thank you for watching!
@simpleman3674
10 ай бұрын
That’s awesome , I’ve been looking for something like this, I want the same thing except a larger monitor
@LyndonsWorkshop
10 ай бұрын
Yes, I wanted a bigger and better monitor also but is limited to my area as the laptop is blocking. For a bigger monitor you may need a wider case for more space.
@powderriverprotective
11 ай бұрын
Nice job
@Bianchi77
11 ай бұрын
Nice video shot, well done, thank you for sharing it with us :)
@LyndonsWorkshop
11 ай бұрын
Your welcome. Thank you for watching.
@scardoso95
Жыл бұрын
"I then spray painted it black to make it look intimidating." LOL love it.
@LyndonsWorkshop
Жыл бұрын
@scardoso95. Thank you for watching. I’m glad some people see my humor. 😁
@pppkenken6610
Жыл бұрын
looking details.
@dududjddjehdhdud-ui3yc
Жыл бұрын
Nice dude!
@LyndonsWorkshop
Жыл бұрын
Thank you
@travistucker7317
10 ай бұрын
You could cut holes for the word to your radio boxes so the wires are behind and not routed down from the top. You could also make trim pieces to cover the wire outlets. A heavier first coat of paint helps avoid that streaky look you were fighting.
@LyndonsWorkshop
10 ай бұрын
Hi travistucker. Yes, this ground control station needs room for improvement. This is just the basic setup for something functional. I routed the cables on top as I may need to extend the radios on a tripod for later long range setup. As for the paint, your right. A thicker primer would have a better outcome. Thank you for the recommendation. And thank you for watching.
@travistucker7317
10 ай бұрын
@LyndonsWorkshop no hate. I meant nothing bad. I'm just trying to give some tips. I think you did really well. I was going to type that, but my kid got her arm stuck in the gate, and i clicked post, i even thought about it after. Such is life.
@travistucker7317
10 ай бұрын
@LyndonsWorkshop if you were going to use longer cables on occasion, you could use surface mount connectors and cables from here to there. Many solutions, really. Painting is never fun to me, i always have to do 30 coats to get the look i want
@LyndonsWorkshop
10 ай бұрын
@@travistucker7317 . Not at all. I welcome tips. That’s how I learn by adapting to other people’s ideas. This video was actually taken 5 years ago and only able to post it this year after a much needed rest from work. I just post it to add on to my collection of videos and was amazed it got thousand of views. I just don’t understand how youtube algorithm works. Take note I am 5 years younger than my other videos.😁
@LyndonsWorkshop
10 ай бұрын
@@travistucker7317 I get you. Painting and glueing is not fun. I just dont have the patience to wait for the next coating.
@CoNeSol
8 ай бұрын
Well done man - very impressive - but what was the total cost in the end?
@mastercarino
Жыл бұрын
Do you have a list of the components you used?
@EBimBom
Жыл бұрын
Great work! What telemetry radio are you using?
@LyndonsWorkshop
Жыл бұрын
@Emillsmailov. Thank you. I’m just using a generic one I got from amazon. I think they are just rated 400 meters distance. But you should be able to get longer distance telemetry radios depending on your application.
@JesterR-ps4uj
2 ай бұрын
ur still using a very old th9x! cool
@SteelWolf13
Жыл бұрын
Open question. 05:28 what software is on the laptop for drone monitoring?
@LyndonsWorkshop
Жыл бұрын
Sorry for the late reply. I used mission planner for the telemetry. You could also use Qgroundcontrol as what engineers usually use.
@vaibhavbakshi2138
27 күн бұрын
Hi! What epoxy did you use?
@jeveloz47
5 ай бұрын
Hey can get ur help with something like this? I got some questions and I can't seem to get anyone to help me with em or where to go and get the help.
@user-kp3fw4zd3c
6 ай бұрын
it was a holy ghost rock and roll in jesus name
@crawford323
2 ай бұрын
Adapt a joy stick. There are a lot of private pilots who has not grown up gaming.
@earthstewardude
Жыл бұрын
Ground Control to Major Tom - David Bowie
@tompat2365
6 ай бұрын
Now he can start All Nukes.
@ebikefe
10 ай бұрын
Can you share the build parts list?
@hazimjamil8075
10 ай бұрын
Hi, can i have your box sizing?
@LyndonsWorkshop
10 ай бұрын
Hi Hazimjamil. I bought it at harbor freight. The model is Apache 4800. It’s roughly around 20x15x8 inches. It would be nice if you go with the models with wheels.
@aaronmarkstaller
10 ай бұрын
Sub. Whered the monitor come from
@LyndonsWorkshop
10 ай бұрын
Hi aaronmarkstaller. It’s s as cheap one from amazon. I’m sure there are better ones now a days.
@AnthonyCelata
Жыл бұрын
Hey, I've been flying model airplanes since the 90's and I'm very familiar with current transmitter/receiver tech. I'm trying to figure out how Ardupilot works with a ground station like this in conjunction with a 2.4Ghz transmitter. I know you can run Ardupilot from a windows based PC and code custom buttons and joysticks and what not. But why are you burying a transmitter in the bottom of that case and why do you have an elastic holding the right stick up like that? Does that transmitter override any commands sent from the PC or something?
@LyndonsWorkshop
Жыл бұрын
Hi AnthonyCelata. I'm flying my quadcopter with a telemetry radio only, to run my experiments. Although recommended to have the 2.4Ghz transmitter as a backup, it is not necessary due to existing failsafes (such as return to launch, etc.)if signal is lost. I did include the 2.4Ghz transmitter in the video just to show the sufficient storage space below but I'm not using using it during flight. Also the rubber is just to pull the stick to the side as it is protruding.😁
@ZOMBIEEZ
9 ай бұрын
mans using the titan sub controller 💀
@GoldenCoastGTA
8 ай бұрын
Detail your description, what you used, the purposes.
@LyndonsWorkshop
8 ай бұрын
Hi GoldenCoastGTA. If you are into ardupilot or pixhawk based drones(Quadcopters, fixed wings, rover). This is a control station to command your drones.
@afgfun10
9 ай бұрын
Can someone hack the controlling system of drone i mean like Stealing the drone?
@urPainYT
Жыл бұрын
eyy 70th like, because 69 is..
@LyndonsWorkshop
Жыл бұрын
@Pain-wo6oh. Thank you.
@urPainYT
Жыл бұрын
@@LyndonsWorkshop btw, thanks for giving me a project in the near future, because I'm interested on flying an diy fighter jet auv replica.
@LyndonsWorkshop
Жыл бұрын
@@urPainYT . I’m not an expert on drones but I’ll try to share my experience along the way on this field as raw and understandable as I can. I try to show the hobby not just the success but also the failures. Thanks.
@mierbeuker8148
Жыл бұрын
So basically you made a laptop case to hold everything, but you can't take out what you want, because everything is screwed down. How is that better than just a laptop bag, where you only take out what you need at that moment? This makes.....no sense to me.
@LyndonsWorkshop
Жыл бұрын
Hi mierbeuker8148. Thank you for watching. I used thumbscrews for easy access to the bottom.
@VisionVallarta
9 ай бұрын
LO PRIMERO SON UNAS TABLITAS CON PLASTILOCA DE SOPORTE...
@jeveloz47
5 ай бұрын
Hey can get ur help with something like this? I got some questions and I can't seem to get anyone to help me with em or where to go and get the help.
Пікірлер: 57