Stock CYMA gearboxes are pretty strong. I've done DSG builds with those.
@cooljohnguy79
3 жыл бұрын
what cyma guns tho
@MASSARMS3
3 жыл бұрын
@@cooljohnguy79 I use plastic or metal body M4.
@wyshtechairsoft
3 жыл бұрын
Not the CYMA gearbox in a AK74 I recently worked on! It blew my mind how weak it was... caught it on video too.
@MASSARMS3
3 жыл бұрын
M4 CYMA'S, I have had good luck with.
@nauticpyro6403
2 жыл бұрын
@@MASSARMS3 I have a cyma plat. M4. What kind of parts do I need?
@n8taing612
4 жыл бұрын
9:16 *negative airsoft would like to know your location*
@kspoop
4 жыл бұрын
HAHAHAHAHAHA
@tylerwilson4450
4 жыл бұрын
I could hear him swearing from Canada LOL
@n8taing612
4 жыл бұрын
@@tylerwilson4450 he's from the UK lol
@tylerwilson4450
4 жыл бұрын
@@n8taing612 *Whoooooosh* dude. The joke was he swore so loud I could hear him from across the ocean.
@n8taing612
4 жыл бұрын
@@tylerwilson4450 whoops I was thinking you meant he was swearing IN Canada, yea went over my head
@rafaelkestafa
4 жыл бұрын
Loove this video,the format the editing,the explanation...keep going like this, I've missed these videos so much :)
@MASSARMS3
2 жыл бұрын
A spur gear from a 16:1 gear set would make it a 16:1 dsg and 22TPA motor would bump up the rps and it will still be reliable.👍
@ChadrikThunderCaulk
4 жыл бұрын
As for metal cylinder heads, I've run into a few that have o rings on the front(towards nozzle), I tend to like those better as I feel it helps with the shock transfer!
@hakont.4960
4 жыл бұрын
This is why I've come to like plastic cylinder heads, they give a tiny bit of shock dampening.
@ryu-yuta9259
Жыл бұрын
@@hakont.4960 Custom nylon/ threaded cylinder head nozzle would be a good idea.
@AQUAPROS
4 жыл бұрын
Great vid, learned a lot from you over that last 2 years 👍👍👍 About to DSG my King Arms PDW 😎
@tyche4610
3 жыл бұрын
Did you ever end up setting up that dsg? I have a king arms pdw and I want to dsg it also
@frahnzenberg7561
3 жыл бұрын
@@tyche4610 I was gna ask the same thing
@frahnzenberg7561
3 жыл бұрын
How much did it cost.
@jhqtech
4 жыл бұрын
Cheapest dsg: Ares amoeba, put 2 magnets in a shs dsg with a nice motor and new bushings and proper mods and ur good to go. The shs route is the best since it comes with the tappet plate, just use an ab mosfet and a 30k motor with them since you can only use 16 or 18:1s and uve got a 40rps gun. Key tip for dsg low feeding or low fps: try trimming 2-4 coils off the tappet plate spring, make sure the tappet plate is about 11mm, and dont run a barrel longer than 340mm
@happyrobot6396
4 жыл бұрын
You won’t need an AB mosfet, also they are really bad for your motor
@RomanDufek
4 жыл бұрын
did you cut the SHS tappet plate further? I have just build the setup, and trying with 18k 28TPA motor (i can swap it later), it does give 25rps (expected), but the FPS is very inconsistent (80-115m/s with SP170), so I am thinking about cutting it further.
@milkman.8389
4 жыл бұрын
this...does put a smile on me face
@arag1574
4 жыл бұрын
I have a 30k 20:1 krytac dsg, it's been good to me so far
@veke05
4 жыл бұрын
How much is the rps?
@PebbleBlaster9
4 жыл бұрын
OMG THE LEGEND HAS RETURNED How to build a cheap dsg parts list assuming all mods are done like radius and aoe Shs 16:1 or 18:1 Shs high torque motor Sp150 MOSFET Shs piston Swiss cheesed Cylinder ports corresponding to your barrel length. Other than that everything high durability, that’s like almost all. I get 43 RPS 340fps
@hakont.4960
4 жыл бұрын
Cylinder porting is irrelevant in a DSG setup since you only utilize half the piston stroke anyway.
@PebbleBlaster9
4 жыл бұрын
Håkon T. Yes but I’ve had one time I had to do it in a 10 tooth dsg
@hakont.4960
4 жыл бұрын
@@PebbleBlaster9 Where did you get a 10 tooth DSG?
@PebbleBlaster9
4 жыл бұрын
Håkon T. Got a custom built 32:1 sector gear and had sanded it down to 10, I did this because it’s a little bit lower stress
@hakont.4960
4 жыл бұрын
@@PebbleBlaster9 No wonder you were having issues. With a 9 tooth DSG the PME margin is already tiny, with a 10 tooth DSG you're almost guaranteed PME issues.
@CheeZyNutZ
3 жыл бұрын
How to build a reliable DSG: keep everything stock only change sector gear to DSG and your spring and then cut down your tappet plate. It's literally that simple. You don't need all these crazy fancy parts. Grab everything from SHS to keep it cheap. Also ask yourself "do I really need to be upgrading my gun?" Or should you be spending money elsewhere like eliminating fog. There's no point in having pr upgrading a gun that can shoot targets a eighth of a mile away or dump an entire mag of bbs in half a second when you can't see 5ft in front of you
@notsbil.15l98
3 жыл бұрын
Nice advice
@battlefieldaces
4 жыл бұрын
I've been using the same SHS piston in a DMR build with an M150 spring and the release tooth is getting worn out in much the same way.
@preets.customs
3 жыл бұрын
Love the music!
@dezdunbeno6440
2 жыл бұрын
Hi I’m building an ICSCXP dual sector gears with the siegetek 10.44.1 gears i’m using a 22 TPA motor was an M1 90s spring I also have an M17 spring but you’re both overshootshooting I also have a leviathan by jefftron and I am having some major problems it sounds like the gears are grinding it’s over shooting I don’t know what is going on please help
@TheSLFloW
10 ай бұрын
Why you not use the 8 teeth piston already? and for short barell you should definitely use cylinder with hole almost in center right? (it increases fps, but i do not know if it is the same for DSG) I want to ask you, if you have experience with difference in fps, on the same setup (SSG, piston, cylinder, spring) but with half stroke piston against full teeth piston but on half volume cylinder - with hole starting in center (for 200mm barell for example).. Is there more FPS even when piston pushes air and it blows out from cylinder against when piston go only from the reliable volume (from half of the cylinder, from hole to head), SO get the piston more speed when you use full teeth piston? nevermind that half cylinder is opened? (thats why you use stronger springs for DSG?)
@demonetizedhistory5806
3 жыл бұрын
I like this guys posh formal act lol
@dawsonh6540
4 жыл бұрын
Can you link the mosfet?
@veke05
4 жыл бұрын
Just buy a GATE NanoAAB mosfet, its under 30usd and can withstand 14v batteries
@jdmdc5r048
3 жыл бұрын
I picked up a shs v2 8mm bearing gearbox shell, think that can take a decent beating or should I keep that one low stress
@nhurty
3 жыл бұрын
What is the best barrel lenght for DSG ? I would like to use 300 mm barrel but... it will be not too long?
@SDBoards55
4 жыл бұрын
Do you need a specific tappet plate when using a dsg? Or do you just modify/cut off the excess to make it work? Also, will there be a big difference in the rof when using 7.4v compared to an 11.1v? Thanks!
@hithereperson8137
9 ай бұрын
No, you can modify it, and yes more voltage is more brrt, but you have to worry about temps
@pointingsoyjak4271
4 жыл бұрын
1:30 would a Gate Titan work? If not, what is that mosfet in frame?
@veke05
4 жыл бұрын
Yes, a gate titan is more than enough. I have a SHS 12:1 with a balanced motor and im running it on 11v battery and i have a m90 spring. Getting 30rps with a single selector build and i have a nanoaab mosfet. Gate mosfets are very good and cheap.
@ChevyOtto
2 жыл бұрын
this vid is so good
@chaze9172
4 жыл бұрын
TheAirsoftTech I have an 18:1 dsg build with an shs ht motor and an m150. The shs motor is starting to slow down a bit. What would a good motor be for mainly trigger response, but also around 40rps, which was what the shs motor was getting when it was new, it is not around 30-35. I was thinking the asg 30k boost, but I was unsure of if it would just preform the same as the shs, because they r both 16tpa.
@hicapasforlifeyeet4391
4 жыл бұрын
Here is my build - Asg 22k -M150 spring -shs 16:1 -7 tooth dsg -titan -1200 mah, 20c battery This setup shoots 38 RPS. That can be easily be pushed past 40 with a bigger battery.
@opairsoft8100
4 жыл бұрын
Chaze clean the shs and keep running it. If you do get a new motor, I would suggest skipping the asg motors, they are about shs quality if not sometimes worse with better qc for more than a shs.
@hicapasforlifeyeet4391
4 жыл бұрын
@@opairsoft8100 What motors do you run?
@MKDMR
4 жыл бұрын
i got the same problem with the HT shs motor, any other recomendation of motor you guys can share? for 18:1 dsg m160
@opairsoft8100
4 жыл бұрын
Hi Capas For Life Yeet currently testing out a tienly motor in a m249, have also a jg blue in my 20:1 dsg and is running pretty cool at about 18 amps. Have also a g&g 35k in a 18:1 ssg that is nice, but is running very hot with the ares efcu gearbox. Have also heard guarder motors are good.
@idrinkbbs
2 жыл бұрын
Where do you buy your parts? I cannont find what mosfet you use.
@Scoobydcs
3 жыл бұрын
What kindof rps causes feed issues with hicaps? I had 39 rps with an ssg and had no feed issues. Also what common ssues are unique to dsg?
@ozani9554
3 жыл бұрын
What battery is this?
@willsahraoui3758
4 жыл бұрын
Great informative vid Ryan! :)
@richardluu8076
4 жыл бұрын
WE LOVE RYAN!
@hicapasforlifeyeet4391
4 жыл бұрын
I also like heavier pistons in my DSG builds. The heavy piston works well with heavy bbs!
@peeque9904
4 жыл бұрын
What length barrel are you using? I'm also using an SP150 like you are but I'm only getting 300fps. I've still got 30-40fps to gain somewhere. I'm thinking my barrel my be too short.
@justanotherasian4395
4 жыл бұрын
Check your air seals and the barrel in a g36(depending on model) is around 210mm if I remember correctly
@cosmo8465
4 жыл бұрын
Thanks for the info I’ve been slacking on my build, my question is does the sorbo pad thickness kill your FPS? I’ve noticed I’m only at 290 FPS with a 170 spring, my air seal is perfect so I’m guessing it could be the thickness of the sorbo, what do you think?
@cosmo8465
4 жыл бұрын
Motor is a jg blue , thinking a tienley got 25000 ultra torque
@happyrobot6396
4 жыл бұрын
Cosmo sorbo is bad and you should almost never use it. Since sorbothane has a significant “reset time” (the time it takes for the material to return to its original volume once being compressed), the consistency of the whole compression system becomes unreliable. If you really need to correct AOE, use polyurethane pads or a similar material with near-instant reset time. Also, when you say you have perfect airseal, have you included the nozzle-bucking connection into that assessment? It’s common for people to lose FPS between their nozzle and their hop up unit, due to a multitude of reasons ranging from tappet plate timing to nozzle length. Make sure you check all that first, then try removing your sorbo pad.
@cosmo8465
4 жыл бұрын
Thank you yes I do feel my timing is a little off but I’m using a thick sorbo pad so with all those factors I’m considering switching the pad out to maybe something not as thick? The cylinder volume is already low enough and I feel that the thick sorbo is just hindering FPS, thanks for the response and I’ll recheck timing and hop unit. I’m using a 70d bucking with r flat hop.
@advanceddarkness3
4 жыл бұрын
I am getting 300 fps with a m170 DSG with .25g bbs. I use a bored out faucet washer to correct AOE.
@cosmo8465
4 жыл бұрын
advanceddarkness3 awsome thank you I did the same!
@BloodxSoulZ
Жыл бұрын
Ive build a 18:1 SSG High rof with aprox. 40rps (Shs and all other gears didnt fit besides the original ones) but it doesnt really feed. If i put on a really short nozzle, all bbs feed but thats dumb to use. Note to take is that i changed the HUU. Nozzle has about 0.3 to 0.5mm way to seal with the bucking (i didnt measure it). Even a tighter tappetplate spring or cutting off a piece of the Fin didnt help. I didnt test it WITHOUT a delayer clip. Maybe a normal SG clip could do the trick? The original highcap which always fed doesnt work and the aftermarket midcaps from the same Brand also
@davidstandish4767
4 жыл бұрын
Do I need a 3031 based mosfet with a optical mosfet like a perun?
@camhoff5333
3 жыл бұрын
I've build a high speed ssg gear build and I want more speed so im considering upgrading to a DSG. The current gearbox shell is from a G&G Firehawk, do you think this gearbox can handle the stress from a DSG build?. (Also the gearbox shell is different from the standard combat machines of its time and has been radius(ed). Thanks
@robp418
3 жыл бұрын
I’ve run the newer gen reinforced shells on an m150 dsg and had em last about 40k before breaking.
@fumes1955
3 жыл бұрын
will this work with an electric blowback rifle with a v3 gearbox?
@ChristianneKho
3 жыл бұрын
Awesome vid man
@parky6031
4 жыл бұрын
Do you still do customer builds? If so where is the proper place to contact you?
@MKDMR
4 жыл бұрын
Hello thank you for the video! can i ask you recommendation of what type of motor you recommend to buy for a DSG build 18:1 / m160 / 230mm inner / 2200mah 25c 11.1v / now using shs HT but drop rps with time... THank you!!
@TheAirsoftTech
4 жыл бұрын
I mean, SHS motors tend to be a little cruddy. But in my experience brand new, clean motors tend to perform better on large, high discharge batteries. If your motor isn’t dirty and your setup is other wise fine, ROF drops are usually because the battery is only capable of meeting the demand of the motor for a short time. Higher mah batteries with a higher discharge rating fix this specific issue
@MKDMR
4 жыл бұрын
TheAirsoftTech got it!!! So dont need to change the motor, just maybe get a 3or 5000mah 30c 11.1v lipo its fine ?
@noxtoof
4 жыл бұрын
@@MKDMR Hobbyking has a few Turnigy lipos that are 2000+mAh and 40C or higher. You want high mAh but also high discharge (C)
@MKDMR
4 жыл бұрын
@@noxtoof Thank youuu for the information!! i will check that!
@user-qq7xo5rd8x
4 жыл бұрын
60-90C would be enough?
@Uria-jz1gu
4 жыл бұрын
i like dsg's but i would prefer a good bfg
@DatEcuaRicanDude
3 жыл бұрын
what's a reliable GEARBOX you would advise for someone who is going for a DSG build with all new parts???
@KoujiRenamon
3 жыл бұрын
Retro arms of course lol Lonex So far VfC (I've done a couple builds with no cracking etc)
@xmarkiexmayhemx2200
3 жыл бұрын
what happens if i used a m105 in a dsg build
@ljudevitbinder9114
4 жыл бұрын
Alright,how do you shim Bevel to Pinion in G36? Kinda hard to see since the hand grip is one piece with the receiver.
@TheAirsoftTech
4 жыл бұрын
Just attach the motor cage and shim bevel to pinion that way. Ignore the receiver since the motor isn’t really effected by the receiver in this case
@ljudevitbinder9114
4 жыл бұрын
@@TheAirsoftTech Totally forgot that G36 is different than mp5k,that is what I meant actually. There is no separate motor cage in mp5k so it is really hard to shim it properly. How do you deal with that? Thanks btw.
@happyrobot6396
4 жыл бұрын
Ljudevit Binder I guess you would have to actually shim the motor to the inside of the pistol grip. I’ve heard of people doing this on other types of immovable grips.
@ljudevitbinder9114
4 жыл бұрын
@@happyrobot6396 Yeah,I have done it by guessing,and pressing the motor by hand to the gearbox. There is no way of 100 percent reliably shimming it to the Bevel gear. I have just tried and tried till I felt happy about it. I was worried since it was a slow DSG build. It works OK so far.
@opairsoft8100
4 жыл бұрын
I would highly suggest for a budget dsg to not spend the money on a o ring air nozzle, the o ring sealing idea is wrong, the o ring is only there to center the air nozzle or if it’s a metal air nozzle, it’s to prevent metal on metal contact. Especially if the brand has good qc and tolerances such as krytac, tm, and some others. I personally like using silicon sealant on the cylinder head since it works in my opinion better than the plumbers tape, and is extremely easy to remove or clean up.
@n8taing612
4 жыл бұрын
Not sure what u mean, I got an fps jump from switching from a plastic non o ring nozzle to a metal o ring nozzle. And both are same length and have tapered ends
@hakont.4960
4 жыл бұрын
This is actually true, if the nozzle fits correctly you'll gain almost nothing by switching to an o-ring nozzle from a non o-ring nozzle. I don't replace the stock nozzle or cylinder head unless it's really necessary.
@opairsoft8100
4 жыл бұрын
N8 that has nothing to do with the o ring though....if you got a fps boost, it’s because the “upgrade” fits tighter and has less wiggle.... If a company has good fitment tolerances, it’s unneeded. Example is my tm p90 20:1 dsg, with a lonex O-ring air nozzle, there was zero improvement over the stock tm. Another thing is that the air flow path is not going to be traveling backwards in a aeg system. If it was, then yes a o-ring could help, but it doesn’t.
@justtom3338
4 жыл бұрын
Why do you do angle of engagement through metal rings between piston and piston head? It makes a piston heavier
@TheAirsoftTech
4 жыл бұрын
Me love a heavy piston
@Inkybel
Жыл бұрын
Does anyone know if this is possible with the echo 1 gat?
@MKDMR
4 жыл бұрын
super nice video !! i got a little problem wiht my first build DSG can you give me some suggestions please? :/ My build is a RA GB + SHS 18:1. + SHS DSG 7T + SP150 + ZCI Tappet spring(NO mod.) + Tappet plate 8mm fin + Vfc Nozzle + Maxx chamber + Madbull bucking + 2200mah 11.1v 25c lipo + SHS HT motor + SHS SC piston. 0.25g = 350-355fps. the problem is when i full auto, its drop down to 320-330 fps... and i rlly cant figureout what the problem... Greetings from Argentina!
@MKDMR
4 жыл бұрын
PD1: hitting the build is hitting 39-40rps. btw, thinking to change the motor to a ASG 30k or 35k. ( want to get a better quality motor and if it can reach to 45rps maybe or 50rps just to get done this project for a goal not to play with that rps xD haha
@kapowiekapowie865
4 жыл бұрын
Hey TheAirsoftTech, I have a 12:1 SSG with a ZCI High Torque motor and a Gate Titan. I’m getting around 19 RPS, I wasn’t expecting anything crazy with that motor, but I thought I’d be getting something closer to 30. I thought I shimmed it well (using your video as my guide). Any ideas? My battery is an 11.1v 20c 1200mAh and my compression/spring is stock G&G.
@robp418
4 жыл бұрын
That battery is pretty weak. You could probably pick up some rps by running something with a higher mah/discharge rate. My dsg was at 38 rps on an 11.1 1200 mah 20c lipo, then I switched to a 2200 mah 50c 11.1 lipo and it bumped it up to 50 rps.
@kapowiekapowie865
4 жыл бұрын
Rob P thanks man, could you link me a solid battery? nothing too big because I have an arp9😅
@robp418
4 жыл бұрын
Kapowie Kapowie that makes storage pretty limited. I’d try to find one of similar dimensions to the one you have now but with a much higher discharge rate, such as 40c or more. On my build I ended up just running it outside the stock to avoid size limitations.
@robp418
4 жыл бұрын
Kapowie Kapowie if the battery doesn’t help much then you could go with a higher speed motor. The zci is a 22tpa motor which is torquey but doesn’t have the best rof. You could try something like a shs high torque or asg boost 30k. If you’re still not satisfied with the rof after all that then it might be time to build a dsg.
@kapowiekapowie865
4 жыл бұрын
Rob P thanks, i’ve been considering getting a higher speed motor, but it’s not really practical for my field. i’m looking for a better battery, but it’s hard to find one
@eliamarrucci9919
4 жыл бұрын
Great man!!!
@kacperchodacz9405
4 жыл бұрын
I have a one question. Witch motor shoud i get to make my dsg set silent ? I have shs dsg + 18:1 shs gear set + shs light piston + infrit motor + m150shs .(arp9 gg) I checked shiming , aoe, pistol grip to lower shiming and it is still loud.
@hakont.4960
4 жыл бұрын
A Tienly or Guarder motor that you convert to D-type and then install an SHS D-type pinion gear, that's the smoothest you can get.
@justanotherasian4395
4 жыл бұрын
I would use a ASG 22k
@deanmaiwandi2693
4 жыл бұрын
tienlys are not that quiet...the CNC ASG have been the quietest ive used
@hakont.4960
4 жыл бұрын
@@deanmaiwandi2693 ASG motors have really questionable build quality though.
@hbob242
3 жыл бұрын
Hey man, I'm not too into tech work myself, but I've had some cust OP m guns built for me in the past with parts i chose and they worked out well, but in curious as to have your input on my new build. The base gun is a vfc Avalon I believe it's a saber? I'm planning on amazing trigger response, with also good ROF. My plan is using shs 13:1 gears, asg 22t motor. I've used shs parts in the past and they've always held up nicely. What you recommend for a piston and cylinder setup? I'm not sure if a metal or plastic piston and what not would be better for a higher stress build. Thanks
@hbob242
3 жыл бұрын
Custom*
@masonmoser8287
3 жыл бұрын
Well you don’t want a metal piston. Those warp and break easily I’ve heard. Personally ever used one. I suggest the Shs or if you’ve got a high budget the retro arms kratos piston. Usually you can keep you stock cylinder set up. It usually works fine. You’ll probably want a good piston head like Lonex. And make sure you glue your piston rack in. Good luck. 👍
@takemikazuchi321
2 жыл бұрын
does lonex bearing good one??
@lucasposell1972
4 жыл бұрын
Cool vid helped alot
@Scoobydcs
3 жыл бұрын
Is agate astor suitable for dsg?
@jinnrice
4 жыл бұрын
My god been waiting for your videos to return for a long ass time!!!
@roycedoll115
4 жыл бұрын
I’ve been building a DSG recently and I’m having trouble getting the gun to shoot in semi auto... when I shoot in semi it shoots 4 times and then it locks up and semi doesn’t work until after I shoot it in full auto a few times. I’m using a 22 TPA ASG infinity motor, and a siegetek 20.15 DSG Gear set. Currently I don’t have any mosfet in the gun... would that have any impact on my semi auto not working?
@maxmcmillan4984
4 жыл бұрын
Not having a mosfet is likely the cause. The mosfet would help with transfer of current, which is probably the thing your guns having trouble with. Might be worth the try to get one but go and ask a local shop in your area and see what they can do to help.
@robp418
4 жыл бұрын
Royce Doll could be over cycling because you don’t have a mosfet with active breaking. I’m running a gate titan basic with a tunable hpa trigger and it’s insane.
@roycedoll115
4 жыл бұрын
Thanks for the input, I’ll look into a mosfet... I’ve been wanting to get a gate titan, but they are quite expensive. I guess I have an excuse now
@robp418
4 жыл бұрын
Royce Doll yeah, they are pretty expensive. My excuse to buy one was that if I’m okay with spending $200 on externals then there’s no reason for me to cheap out on the stuff that counts.
@roycedoll115
4 жыл бұрын
Rob P nice, haha. My externals are completely stock, which I would change if I had the money, but I guess valken externals will have to do
@juancaceres3202
2 жыл бұрын
ohhh NS thanks
@jkpisces
3 жыл бұрын
how do you remove a metal gear tooth?
@bvgare9296
3 жыл бұрын
Já ganhou o like só por ter legenda
@ONLYBEAST-rd1yj
4 жыл бұрын
how bout a Ronin t6? any tutorials or guides to do a dsg upgrade on it?
@shadowyairsoft7970
3 жыл бұрын
probably a little late lol but here is a part list www.reddit.com/r/airsoft/comments/eoa716/kwa_ronin_t6/
@catalinawinemixer4233
4 жыл бұрын
where do you buy your parts I'm looking at evike and half of the stuff is out of stock
@Evan-eh9dd
4 жыл бұрын
its near impossible to get all the high quality parts you might want for a complete build from the same website all at once. You'll have to pay attention to what these established techs have to say about different parts and brands then go google hunting. A lot you'll probably have to order straight from china or japan. I was able to get SHS shims from shootercbgear.com in January, but a lot of high quality motors, and barrels i was looking for were out of stock. It would be smart to google search mentions or reviews of some websites if you're not sure of their legitimacy, but you wont find info on everyone. Might have to send emails to make sure they are shipping parts during covid, as well, or if there are any international shipping restrictions.
@justanotherasian4395
4 жыл бұрын
Evike and brill are really the only places to buy the parts.
@slabgizor1176
4 жыл бұрын
I hear that Evike hasn't been able to get any shipments in port because of the beer flu.
@edwardfontaine2230
4 жыл бұрын
I would like to get the KWA KM4 A1 is this a good airsoft gun to have if not can you recommend one of the M4A1 thanks
@happyrobot6396
4 жыл бұрын
I would stay away from KWA, but a budget gun first if you’re new. Check out G&G or Classic Army
@veke05
4 жыл бұрын
G&G is a good and reliable brand. Best beginner guns.
@Callsign_Kishin
3 жыл бұрын
@@veke05 even experienced players as well as speedqb players use them as well. Highly customized as well!
@veke05
3 жыл бұрын
@@Callsign_Kishin yeah
@wage4598
4 жыл бұрын
can i put teflon around my piston? got a super garbo one and would like to keep it as long as i can
@justanotherasian4395
4 жыл бұрын
Wa ge doing that would ensure your piston will last you for about 1 month. So no, please don’t do that
@wage4598
4 жыл бұрын
@@justanotherasian4395 yeah I totally get that, wouldn't be a permanent solution and would make quite a mess
@justanotherasian4395
4 жыл бұрын
Wa ge it’s much more worth it to just buy a good SHS blue or something similar.
@wage4598
4 жыл бұрын
@@justanotherasian4395 definitly, was just looking for a short term solution while I save for a new piston. I'll just stick with my FE for a few weeks
@veke05
4 жыл бұрын
Wa ge i have a shs blue, its good and cheap just buy it.
@limit3d791
4 жыл бұрын
if you were given a budget of 240$ to make an ssg, what parts would you use?
@robp418
4 жыл бұрын
Gate titan basic $120 dollars with programming usb Shs 12:1 gears $30 Hpa tunable speed trigger $25 Shs piston 14 teeth full metal rack $10 Shs high torque motor $40 That puts you at $225, I’d use the rest on a good 11.1 lipo battery. Also you need shims to shim the gearbox with if you don’t already have them.
@limit3d791
4 жыл бұрын
@@robp418 I already got an asg 30k motor so with the extra 40, what else could I do to stock internals cuz I was thinking of a lonex piston head and maxx model 21mm nozzle
@robp418
4 жыл бұрын
LIMIT3D the asg 30k is a very good motor. The 21mm nozzle and lonex piston head are also good choices to boost FPS slightly. I would also make sure to get a good mag that will feed at high rates of fire. I personally prefer dsg builds for the insanely snappy trigger response and high rps, but the build your looking at would be solid, and probably more reliable.
@justanotherasian4395
4 жыл бұрын
ASG 22k or 30k SHS 13:1 Low resistance trigger unit GATE warfet SHS 14 tooth piston Maxx model tunable trigger M120 spring Short stroked 2 teeth Puts you just shy of $210. If you want you could shove some modify ceramics in there.
@leithafae
4 жыл бұрын
@TheAisoftTech ok so I apologise, I am ignorant and want to join the airsoft hobby after corona is over. its not my first hobby larp takes that. but I am going to purchase a decent airsoft gun. but why do people want these high output of bb a minute and tech wise how long will a standard stock weapon last compared to if i pay a tech to go through it and do it out? honestly what i am looking for is something that will keep going, with the standard cleaning. but i want it just to go and go and go so i dont have to keep buying new guns will going to a tech help avoid that?
@EradWir
4 жыл бұрын
A gun first has to match your playing style and field. People like these BB spitting monsters for high output over short time like an enemy crossing from one cover to the next. You need only 1 bullet to hit so if your shooting 40 in a second your chances get better. First get a decent beginner gun and then search for a field that has casual beginner days otherwise the speeds softers with their clapped out 50 sps guns will clap you with experience and better gear.
@wojtekepecki5774
4 жыл бұрын
good rof gives you also good trigger response time
@veke05
4 жыл бұрын
My cqb field only allows semi and high rof increases the speed which i can shoot semi, so my gun has aleays shot before i pull the trigger again.
@michaelbernier6972
4 жыл бұрын
Will I need a powerful battery?
@justanotherasian4395
4 жыл бұрын
No, but a good 11.1 will improve trigger response
@jcbeat9296
3 жыл бұрын
I see a lot of people moving away from big batteries for dsgs. I wonder why.
@mitchfromtheinternet297
4 жыл бұрын
Surely there’s no point in a low speed DSG? It only makes sense over 50rps as a short stroke SSG can reach that?
@opairsoft8100
4 жыл бұрын
You can have way less amp draw on a low speed dsg compared to a ssg at the same rps
@Th3ArtyZFactabl3Man
4 жыл бұрын
So removing teeth from the piston rack is not essential?
@robp418
4 жыл бұрын
It’s a must unless you want to destroy your piston/sector gear teeth. On a high rps build it will cycle too quickly catching on the excess teeth before the piston can fully return and it will destroy the longevity of your build.
@hakont.4960
4 жыл бұрын
@@robp418 The teeth after the release tooth can remain, the only advantage to removing them is slightly lower piston weight. It's physically impossible for the sector gear to catch on any teeth after the release tooth.
@robp418
4 жыл бұрын
Håkon T. Depending on your spring and rate of fire, on full auto you could risk pre engagement if you don’t remove them.
@FrozenByFire3
4 жыл бұрын
@@robp418 release tooth not 3rd tooth doofus. Also you don't remove part of the 3rd tooth for preengagement but rather for when you correct AOE and you don't want it to bind with the sector tooth
@hakont.4960
4 жыл бұрын
@@robp418 Not entirely sure what you're talking about. The added weight from the teeth does matter if you're doing a more extreme DSG setup, otherwise it's easier to just leave them there and just remove the 2nd and 3rd teeth for AOE correction.
@ChevyOtto
2 жыл бұрын
jk love your comets
@alexrunkovsky8749
4 жыл бұрын
Nice hit sound, but because plastic boby.
@neillotakoon9631
3 жыл бұрын
Wow this was made on my Bday lol
@isaacshively6705
4 жыл бұрын
So I've been playing more Speedsoft than anything else lately and I just got the Krytac PDW-M and I wanted to get a faster cycle rate for semi auto not really worried about high rate of fire, so I have some Prometheus EG 13.1 gears and I already installed a Speed adjustable trigger would this be enough to get a faster cycle rate so I can feather the trigger or should I also short stroke it
@isaacshively6705
4 жыл бұрын
And I have the old Lonex blue Piston with the full metal rack if I need to short stroke
@reapermedia1937
4 жыл бұрын
Get a higher power battery. I run a 11.1 lipo wired to deans it’s a 3,000 mAh 30c. I can feather my gun pretty damn quick. Haven’t gone fast enough that gun trips over itself trying to keep up yet so I could probably go faster if my finger could. Running 18:1 gears btw on an m120 spring
@isaacshively6705
4 жыл бұрын
@@reapermedia1937 the new PDW-M comes wired to Deans and I only run 11.1's... I've been playing airsoft for ten years so I know all the little tricks
@midwestairtech
4 жыл бұрын
Appreciate the video, but it's a bit of a fallacy to call this reliable without any longevity testing. There are so many ways one could perform reliability tests and all people ever give is a quick Chrono and call it good. I know you have a good amount of experience and so you would understand this setup to be generally pretty reliable for a DSG, but where are the numbers to support that? We have to just rely on your word, which is the farthest thing from credible or scientific.
@isacmateus
4 жыл бұрын
Niceee
@limit3d791
4 жыл бұрын
High speed*
@colenorthway8578
3 жыл бұрын
Your thousandth like :)
@TheGreatBooger
4 жыл бұрын
Do you have a parts list? What fet would you recommend
@davelovero9618
4 жыл бұрын
What is dsg ?
@robp418
4 жыл бұрын
Dual sector gear. There are two sets of teeth on the sector gear instead of one. For one full turn of the sector it fires twice, greatly increasing your rate of fire.
@alextatkin1026
2 жыл бұрын
If you aren't using deans and a mosfet on every single build in 2022, youre bad and you should feel bad.
@GhettoFabulous670
4 жыл бұрын
Ive had teflon tape on my hopup, and it instantly boost my fps a extra 20+ fps. Ofc my comprehension in my gearbox has full compression 0 leaked.
@cheeriosaregood920
3 жыл бұрын
he says that is a "fairly good rate of fire" and I thought 25 rps was good
@troyw5832
4 жыл бұрын
☺😊😀😁😂5 Smile's Cross the fingers.😆
@chan-uz6ej
4 жыл бұрын
🇵🇭🇵🇭🇵🇭 nice video
@thatoneguy6620
4 жыл бұрын
I burn my mosfet using DSG
@opairsoft8100
4 жыл бұрын
Internal Game cool, you either shorted it, drawing to many amps through it, and probably didn’t have a 3034 or something similar that can withstand a medium to high amps.
@justanotherasian4395
4 жыл бұрын
Check shimming, motor height, the spring, the battery u are using, and the actual mosfet
@Sephiroth391
4 жыл бұрын
6969 views, NIIICE
@TheAirsoftTech
4 жыл бұрын
NICE
@pauls.5815
4 жыл бұрын
Yea guys don't put fucking Teflon tape in your gun please, Jesus Christ. Dude if you cant understand why then god help you. You are the guy that electrical tapes his flashlight to your barrel.
@pauls.5815
4 жыл бұрын
Like saying "I just don't understand the problem with rolling deodorant on my balls. I've been putting deodorant on my balls for 7 years and its fine"
@Jasonblanny
4 жыл бұрын
is anyone else incapable of watching this because his voice is so raspy?
Пікірлер: 227