love this video. No talking crap. Straight to the point. Makes it look simple. Hopefully will be 😊
@richmondman2655
Жыл бұрын
Just finished our 2nd chair. Beautiful and comfortable. Thank you for this video - my wife and I enjoyed working on this together. Lots of work, but simple and easy to follow instructions and worth every bit of effort.
@miovignetowinery
7 ай бұрын
Very nice. I took apart 30 barrels for future projects as if I don't have enough to do
@piccoloemal
3 ай бұрын
Excellent tutorial, clear and simple to follow
@petevalenzuela2935
Жыл бұрын
Thank you, finally a true woodwork do it yourselfer without an elaborate professionally equipped workshop
@user-jk2ii4uc7r
7 ай бұрын
Love the chair 😊
@ntshdff
2 жыл бұрын
Thank you for the tutorial I watched your other video 9-10 times pausing taking notes and finally making three chairs roughly following your example except I changed the height and pitch a little and instead of fanning the back out at the top I fanned out the bottom and crowned the top and then added some wood burning aspects to the final by the third chair actually got pretty good and have the perfect Christmas gift for my wine drinking family and friends
@spoonsprojects6649
2 жыл бұрын
That’s great! I’m so glad this was useful. Thank you for sharing. 🙌
@barthelo1
2 жыл бұрын
Instead of 3 drills, get a counter sink drill bit, you will be able to drill the pilot hole and counter at the same time! Nice video and great idea
@spoonsprojects6649
2 жыл бұрын
The most frustrating thing about woodworking is knowing that the simplest concepts have already been invented and will solve your problems. Yes, you are right. I never even considered this. 🙌🙌
@duncanblack808
2 жыл бұрын
I came here to say this too, countersink bits make life so much easier!
@brianknowles7130
2 жыл бұрын
Great build and your a very modest guy. thks.
@7RichM7
2 жыл бұрын
Just finished my fist chair today. Thanks for the plans and video
@chrishaslam1730
2 жыл бұрын
That rocks!!, I make adirondack chairs from bourbon barrels in the UK, rocking chairs are my next build for the autumn, winter range, great vid
@ew.david901
2 жыл бұрын
Love it love it LOVE IT. If I might be allowed a small suggestion? Make your plugs for the forstner holes from scrap staves. It will add a really nice low key touch.
@dougliberman
2 жыл бұрын
I love it! I bought one for a friend a few years ago. I am going to make a couple for myself now. Thanks for the plans.
@thecreativetake
2 жыл бұрын
Beautiful Chair! Nice job!
@thefilthelement
Жыл бұрын
To fill the holes I bought a plug bit from harbor freight and cut out several plugs from a stave cut off. The grain will go the same direction and you can lightly chisel it to match the height
@christroup6416
2 жыл бұрын
Great videos! The detail you have went into is great and really has inspired me to make something out of a barrel I have had stuck in my garage for about 6 months. Keep the ideas and videos coming as being from Scotland theres lots of whisky barrels to get your hands on (saying that the barrel i have in my garage is actually a Jack Daniels one). Thanks for taking the time to put these videos together.
@DaveConnelly1961
2 жыл бұрын
Brilliant. Thanks.
@chrisbrendandavis
2 жыл бұрын
Very cool thanks
@muhammadrizvi5691
Жыл бұрын
wow.. that is cool.. i know a distillery that sells their barrels for $50 after they use them for their whiskey.. i'm going to buy a couple of them now
@spoonsprojects6649
Жыл бұрын
That’s awesome!
@shaneparker2060
2 жыл бұрын
Way to go Stud!
@spoonsprojects6649
2 жыл бұрын
Hey Shane! Thanks!
@richisseite6598
2 жыл бұрын
Ein sehr schönes Projekt 👍🍷 Grüße aus Deutschland 👏👋
@RandyMooney
2 жыл бұрын
This is great, thank you.
@spoonsprojects6649
2 жыл бұрын
Thanks for watching!
@timh991
4 ай бұрын
Really nice chair. Where might I get barrels?
@mickeyb8485
6 ай бұрын
Just found your video but the link is not working. Can you send the plans please
@Hawk865-mj9kj
6 ай бұрын
Please tell us what Sealers to use on the charred side so char does npot rub off on clothing. Thanks hawk
@spoonsprojects6649
6 ай бұрын
I use a spar urethane, oil based, exterior grade, satin finish as my sealing coat. Apply at least 2 coats. I’ve had the best luck with that. I’ve used deck sealer, teak and tung oil, some other stuff, but best results with spar urethane
@nathanbenevides2856
2 жыл бұрын
Question for you. On your instructions, you talk about cutting the back legs at a 5 degree angle so they point inward toward each other. I was trying to figure out what you meant or how that was possible when building a square w the seat base. Thanks in advance! Great video and great product
@spoonsprojects6649
2 жыл бұрын
Great question! I posted a video trying to explain. There will be a slight overhang past the seat board so the front leg can connect. The angle is to try and match the curve of the front brace. I hope that is helpful in some way 😂
@wr8010
6 ай бұрын
Just curious if instructions are gone I click an says error not found
@TheCountryCottageGardener
2 жыл бұрын
Nice video, new subscriber here
@noalanimirsch4640
5 ай бұрын
Thank you so much for this video! Quick question, should the barrel be completely dry before using the staves or should I saturate the barrel before disassembling and cutting? Thanks!
@spoonsprojects6649
5 ай бұрын
I’ve had better results with dry barrels 👍
@noalanimirsch4640
5 ай бұрын
I thought so! Thanks!
@user-uo9bm7wq5u
2 ай бұрын
How much do you charge for your chairs?
@dannelson618
6 ай бұрын
Cant get the drawings from the link
@jeffhoover5106
3 ай бұрын
How much do you charge for a chair?
@Oakydokes
6 ай бұрын
Hi, thanks so much for the video. I finally found a couple whiskey barrels and now the Kojii link you provided is dead. Could I please get the plans?
@spoonsprojects6649
6 ай бұрын
Link updated! Hopefully it works!
@Oakydokes
6 ай бұрын
@@spoonsprojects6649 You sir are awesome! Thanks so much. Will you be uploading any new videos?
@spoonsprojects6649
6 ай бұрын
So glad you’re getting value from the content! What kind of videos would you like to see?
@Oakydokes
5 ай бұрын
@@spoonsprojects6649 Since I'm just getting into stave builds maybe more ideas to make a little side cash. Of course not looking to get rich, but anything would help nowadays. How did your '22 plan work out for you? Maybe an update on that.
@nathanwilshusen1802
2 жыл бұрын
Do I need 2 barrels to =1 chair?...pretty cool btw
@spoonsprojects6649
2 жыл бұрын
One barrel will give you 25-30 staves. Rocking chair requires 23-26 staves. The short answer is, you should be able to go 1 for 1
@brianbarnett4937
2 жыл бұрын
You’ve inspired me. I can’t find the link for the plans. Can you make them available or email me?
@spoonsprojects6649
2 жыл бұрын
If you follow this link, withkoji.com/@Spoonsprojects, I've shared a google doc how to build a wine barrel chair. Hope that helps!
@7RichM7
2 жыл бұрын
What is the size difference between the two barrels?
@prestoncouch2323
Жыл бұрын
Question here. Can this be made from one barrel or will you likely need more then one to complete? I have a single 55 gallon barrel. Thanks!
@spoonsprojects6649
Жыл бұрын
Yes, you can make a full chair with a single barrel. The chair takes 23-25 staves, and a barrel will have 25-30 staves. Just be sure to lay out where you want all the boards to go, and you should be good
@codymatue3197
Жыл бұрын
How tall are these barrels?
@davidvillegas5885
2 жыл бұрын
Hello How long are the 2 front legs also the one with the pung hole??
@spoonsprojects6649
2 жыл бұрын
I cut the front legs at 23”. The bung hole board at 28”
@Pandagaming-hc3fh
Жыл бұрын
How many barrels did it take for one rocking chair
@spoonsprojects6649
Жыл бұрын
You only need one barrel
@Oakydokes
4 ай бұрын
Which brand poly do you use?
@johnturgesen6515
4 ай бұрын
Spar urethane, oil based, exterior grade, satin finish. Choose whatever works best for you, but that’s what I’ve landed on. 👍
@johnturgesen6515
4 ай бұрын
Spar urethane, oil based, exterior grade, satin finish. Choose whatever works best for you, but that’s what I’ve landed on. 👍
Пікірлер: 62