For me, the ideas in kzitem.infoUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
@MarvinCalderon
5 ай бұрын
This recommendation is spam. Stick to the video or other reputable guides.
@davidusa47
3 жыл бұрын
This video series has been HUGE for me. Not sure I could have gotten as far as I have without these.
@kingofbytes
4 жыл бұрын
I'm building my kids treehouse and needed some pointers as I'm not a tradesman. Your videos are excellent - you show all the 'gotchas' and explain it with great videography and no bs that is found on so many other videos. Thanks so much. Subscribed!
@MDTAR15
5 жыл бұрын
It seems like every time i get on KZitem to find an instructional video...i end up watching yours. Nice job guys!
@icreatablestv
5 жыл бұрын
Thanks for watching and commenting!
@paolagonzalez2495
3 жыл бұрын
Hey everyone, the greatest results that ive had was by using the Wilfs Shed Formula (just google it) definately the most helpful info i've followed.
@davidf9630
5 ай бұрын
Thanks for the help. Really appreciate it.
@808chileboys
8 жыл бұрын
Noticed that you are wearing a shirt with the Hawaiian islands cool. Really cool and well explained videos, thumbs up.
@icreatablestv
8 жыл бұрын
+808chileboys Brother!
@marcushurthi
10 жыл бұрын
Great videos. Thanks very much.
@icreatablestv
10 жыл бұрын
Marcus Hurt Thanks for your kind words!
@tpike46w
4 ай бұрын
So how wide of a piece of trim are you cutting from that t11
@radioguy1620
4 жыл бұрын
I thought this was very well done, on my shed I am going to fit each piece then paint all sides and edges before installation to prevent rot . or at least slow it down.
@gregoryarlo5107
3 жыл бұрын
Pro trick : watch series at flixzone. Been using them for watching lots of of movies lately.
@rockyjunior3273
3 жыл бұрын
@Gregory Arlo yea, I have been using flixzone for years myself =)
@tamerhamdy3308
Жыл бұрын
so nice
@sarahhambidge4872
3 жыл бұрын
where does he live, the mountains are beautiful here
@durangodenoche
2 ай бұрын
What type of nails did you use?
@ronh9384
2 жыл бұрын
Nice video series! What size/length nails did you use in the nail gun on the siding and trim? Thanks for your time. Ron
@jaguar5251
8 ай бұрын
Can you link a site where we can shop for that type of corner trim ?...thx.
@GodBlessedAmerica
5 жыл бұрын
What kinda lumber is used for the trim? I like that textured finish.
@matthewmitchell6262
4 жыл бұрын
It looks to be pink ivory but it could also be African black wood
@NewWarOrder
4 жыл бұрын
It looks like LP Smartside trim.
@micallef87
4 жыл бұрын
Pretty sure it’s an engineered/composite planks that he’s using. You wouldn’t get a grain like that from sawn timber
@restassuredworship
5 жыл бұрын
This guys a pro spacer with those nails... not measuring and they look perfect as he's nailing them lol
@shellydeatley8861
Жыл бұрын
How do you reduce sugar in sugar?
@usarmy13mike
5 жыл бұрын
HELP ME please!!!. I purchased a 30L travel trailer. I am redoing the roof and found out everything has been framed with 2x2 pieces. My goal was to build a pitched gable above the RV so I could have a loft inside. I was going to be using 2x6 can anyone give me recommendations on if I'm able to use 2x4 or 2x6 as my rafter since the wall framing is only 2x2. Idk what to do please help
@beto6523
4 жыл бұрын
Hey i have a question, does it need to have a trim piece at the bottom of the shed? Like at the bottom edge of the shed all around it. Ive seem some bigger structures that have it and some that dont. Is it optional or what? Does water get in between the trim piece?
@icreatablestv
4 жыл бұрын
It is optional. It does look good.
@robbyvenetian
3 жыл бұрын
Cool video! Did you use OSB for the fascia? is it 1/2 thick? Thank you.
@michaelroso6854
3 жыл бұрын
Two questions. One, is the fascia board you used a composite wood or all wood? Two, what type of metal piece did you put between the siding on the gable ends?
@jasm.5823
3 жыл бұрын
It’s a z-channel flashing meant to deflect water away from the joint.
@marcuswalker3806
6 жыл бұрын
How much did the whole project costs?? And what's the size of the shed
@AlexIvanov777
4 жыл бұрын
I am building an 8x14 shed out of all my own purchased material(not a shed set)and its costing me close to $1200-1800
@jasonostler9221
9 жыл бұрын
Thanks for the video series, they have been very helpful. Are those Utah mountains?
@icreatablestv
9 жыл бұрын
Jason Ostler Yes, Utah!
@Yahoomediaclub
7 жыл бұрын
Perfection👍👍👍🎸☠️👍
@ClausRow
9 жыл бұрын
I can't find the right dimensions for the smart side trim near me. All I can find is 1x6x8. Is it ok if I use other wood for the trim? The smart side is cheaper but unfortunately they only have that length. Or could I buy the smartside and then cut it to the right width and then add 2 inches to with some scrap? Any thoughts =)?
@icreatablestv
9 жыл бұрын
Ben Silverman Good question. You can have the salesperson order in 16' lengths. If you don't want to wait for that yes you can install a 2 inch piece and caulk the joint. This happens all the time on larger structures like houses.Yes you can use regular wood for trim. Just make sure it has several good coats of paint. Thanks for the great question!
@pookie2707
9 жыл бұрын
Do you have anything showing vinyl siding installation?
@frederickhernandez880
4 жыл бұрын
I've always tried to figure out how to build a shed for my kids. I tried several plans but always got stuck along the way. I'm glad I found this Ryan's shed plans [ Go Here >>> *WoodBlueprints. Com* ]. It has made the work become as easy and simple as I never thought it will be. Thank you Ryan!?
@JimWatsonTheframingMagician
10 жыл бұрын
Nice video, but don't overdrive the nails on the smart trim. You will void the warranty if you do.
@JulioPerez-ck4ls
10 жыл бұрын
Approximately how much was the total cost of this shed?
@icreatablestv
10 жыл бұрын
This shed cost about $1500.00 including the paint.:)
@multipulti161
8 жыл бұрын
Hello! What is the material that you are embroidering the structure? Thanks in advance for your reply!
@mrhoya14
7 жыл бұрын
what kind of trim is this? pvc? wood?
@icreatablestv
7 жыл бұрын
It is an O.S.B. composite board made by LP. Smartside.
@qdaddy357
5 жыл бұрын
LP Smart trim...OSB that's stamped and pre primed
@fredhyzer1701
10 жыл бұрын
whats the trim your using
@icreatablestv
10 жыл бұрын
It is LP Smart side Trim. It is essentially a O.S.B. wood fiber material. So it does not split or warp. It also comes pre primed so it saves in painting.
@JuanRamirez-jd6yq
8 жыл бұрын
freaking nuts
@icreatablestv
8 жыл бұрын
Thanks for watching!
@wjackstl
7 жыл бұрын
I was wondering if, when installing smartside 38, do I need to cut off the shiplaps at the corner butt joints? It was kinda hard to tell on your previous video, but maybe I am over-thinking it. I checked LP Products website and downloaded their installation pdf, but there is no mention of it. I would think so, but would appreciate your thoughts
@icreatablestv
7 жыл бұрын
No, the corners are covered by trim. And it will make the on center spacing off. The most important things are that the panels are square with the studs and that the joints meet on the center of a wall stud. Thanks for the great question.
@wjackstl
7 жыл бұрын
iCreatables thanks for your quick reply
@reikoxan
5 жыл бұрын
shed rough shed ruff
@traceycraig3185
4 жыл бұрын
I have always tried to figure out how to build a shed for my kids. I tried several plans but always got stuck along the way. I'm glad I found this Ryan's shed plans [ Go Here >>> *WoodBlueprints. Com* ]. It has made the work become as easy and simple as I never thought it will be. Thank you Ryan!?
@JgHaverty
9 жыл бұрын
Too busy to miter corners?
@JgHaverty
4 жыл бұрын
@uniqueaddress yes. The correct way and the incorrect way.
@JgHaverty
4 жыл бұрын
@uniqueaddress Its most certainly a preference. The function of said shed is gonna be just fine, sure. But having this large thing in the middle of my yard, I want it to look good too. I would also use a full length board to go across instead of slapping whatever seemed to fit. So while yes, its a preference, and yes its just a shed, but it would be something large and stand-outish in my yard. If you're going through all the effort to make a nice shed, why not ... make it nice?
@strongholds12
5 жыл бұрын
Not my proudest flap
@abertolapena3150
10 жыл бұрын
C. Ñ mm.m...n..nki mg
@WinstonJordan
8 жыл бұрын
How long did this take you to complete? Man hours? A weekend?
@icreatablestv
8 жыл бұрын
+Winston Jordan Yes it can be done in a weekend. It really depends on the skill level. Professional framers that is building sheds regularly can do it in about 10 hours if all the materials are there, without paint.
@joebuttice651
6 жыл бұрын
where do you buy the materials....wall panels
@icreatablestv
6 жыл бұрын
Home stores or a lumber yard. Thanks for watching.
Пікірлер: 72