This is an awesome project and thank you for being so detailed.
@davidvasher6752
Жыл бұрын
Thank you David. Be careful if you build it and enjoy the build👍🇺🇸🇺🇸🇺🇸
@DaveRichardson-v6f
Жыл бұрын
hi my name is david and im from ENGLAND i watched your video on the american flag and i loved it i know i will never be able to get one and you didnt have to keep saying sorry for how long your video was going to be it was a honor to watch a true craftsman at work good luck to you my american friend god bless america
@davidvasher6752
Жыл бұрын
Hey dave. I luv comments like yours, especially from other countries, please keep on watchin and subscribe, i have a request to do a challenge coin holder flag, that will be next video. 👍🇺🇸
@DaveRichardson-v6f
Жыл бұрын
@@davidvasher6752 thank you sir ive just subscribed
@jassenfeffer
Жыл бұрын
Love your flags bc they’re similar to mine-everything from the lay out to the wheel of death (as my buddies call it) 😂 to the finish…except mine have cuts on the FACE .. love the helicopter sounds just as much, bet you’re a fun grandpa! I use a 2 part epoxy finish but I have to babysit it bc nobody likes runs or drips in those valleys. Nice video, love learning from other craftsmen ; have a great day bud…🖤
@davidvasher6752
Жыл бұрын
Luv the wheel of death🤣its true!! Luv makin these things, i've made alot of stuff but the red white and blue is addicting. Thanks for watchin. Check out my red white and blue peace pole. Video will be out in a week or so.
@jay8960
Жыл бұрын
Very beautiful work!
@davidvasher6752
Жыл бұрын
Thanks j. Thanks for watchin
@carriemyre5809
Жыл бұрын
Absolutely love this!!!
@davidvasher6752
Жыл бұрын
Thank you Carrie, luv the nice comments. More projects to come.
@kennyhornby9704
Жыл бұрын
Great work, can you torch the stars a little to match the stripes. Just wondering. Thank you for posting this.
@davidvasher6752
Жыл бұрын
You sure can, but myself I've done this but center of stars seem to burn more than I like. Thanks for watchin Ken. 👍🇺🇸
@kennyhornby9704
Жыл бұрын
@davidvasher6752 thanks for replying, keep up the great work. !!!!!
@WilliamCreasap
2 ай бұрын
Hi David, Great video, awesome looking flag. Do you actually fill the stars with the varnish? Sounded like you said you fill them, so they are flush in the end product. Do you have any with added emblems, or decals, like military logos, eagles, or deer?
@davidvasher6752
2 ай бұрын
@@WilliamCreasap hi william, thanks for watching. I dont fill the stars just put varnish a little heavier. I do carve in miltary lettering such as USMC. Or ARMY. On stripes near bottom of flag. 👍🇺🇸🤠
@Zbonet
9 ай бұрын
Beautiful project! Just a question - could you list the exact union template you used? I am afraid there may be different size templates and I obviously want mine to be the right size for the wood cuts Thanks Richard
@davidvasher6752
9 ай бұрын
Hey richard, thanks for watching. Template size 101/2" by 14 3/4".have fun building and be safe.
@joeaguilar-teacherofthewor4166
10 ай бұрын
This is the best video on making a wavy flag. Can't wait to make my own. Keep teaching us. Thanks.
@davidvasher6752
10 ай бұрын
Thanks joe, thanks for watching too. These are fun to build and look great when finished.
@JoseHernandez-mj6ne
Жыл бұрын
How are you sir. My question is, do you screw two pieces of wood at a time?
@CarlOrminski
2 ай бұрын
Awsome, I made 2 so far myself, but om gluing and screwing the boards together, using 2 1/2 " trim screws. 😀
@davidvasher6752
2 ай бұрын
@@CarlOrminski hey user, glad your enjoying my videos. 21/2 trim screws👍👍.keep on buildind and keep on watching my videos. Thanks. 👍👍🇺🇸🇺🇸
@WilliamCreasap
2 ай бұрын
Thought of another question Dave, have you ever taken the router and fluted the back to reduce some of the weight? Is it possible to do without the risk of warping, or hitting screws that hold the pieces together?
@davidvasher6752
2 ай бұрын
I make mine so wavy, if you hit a screw, there goes your bit. Ive even hit screws when i do my french cleat.
@mornglow
Жыл бұрын
Love this wavy flag. Do you make them a little smaller? And also, you don't mention prices on the description Love your work.
@davidvasher6752
Жыл бұрын
Thank you so much. I have not sold any off utube. Keeping it local as of now. But i sell wavys $300.plus 50 for shipping. Thankyou so much for watching 👍🇺🇸
@larrybenton4915
9 ай бұрын
Always enjoy your videos Dave. Really appreciate the detail you put into making them. Your unique style of narration makes the viewer feel like they're right there in your shop with you. Keep up the good work............ Thanks, Larry
@davidvasher6752
9 ай бұрын
Thank you so much larry. Keep on watchin. 👍🇺🇸🇺🇸
@franklangel1521
Жыл бұрын
Just for safety you should use a push stick instead of your hand
@davidvasher6752
Жыл бұрын
Thanks for your concern. And i have. Thank you for watching
@jmadadak
10 ай бұрын
Just found your channel and I really enjoyed the video. If anyone don't like the length of your vids they can fast forward.
@davidvasher6752
10 ай бұрын
Thanks my friend, thats the way i see. Most rush through videos, then im like well how did he do that. Keep on watching, more to come.
@jmadadak
10 ай бұрын
@@davidvasher6752 The way I see it is that your doing them perfectly and I love your personality.
@mattbiereichel357
4 ай бұрын
So how much do you charge for this flag?
@davidvasher6752
4 ай бұрын
Hi mat. $300.00 i sell them local here in Michigan, just sold one at a show memorial day.
@papascruffy
6 ай бұрын
Awesome, how many hours do you have in this?
@davidvasher6752
6 ай бұрын
10 to 12 hrs papa. The more you do the faster it gets. Thanks for watchin, 👍🇺🇸
@dougwynn6254
Ай бұрын
Dave..could you use. 2x2’s…???
@davidvasher6752
Ай бұрын
@@dougwynn6254 hi doug. I wood not use 2*2.with the waves and screwing and under cut for french cleat i think its just to thin.
@fartinbrundle5495
Ай бұрын
Brilliant video thank you
@davidvasher6752
Ай бұрын
@@fartinbrundle5495 thanks for watching
@ermannodangelo1062
6 ай бұрын
Great job on the flag, looks amazing. Did you make the Punisher Skull in the background?
@davidvasher6752
6 ай бұрын
Thank you so much. I did make the punisher also
@ermannodangelo1062
6 ай бұрын
@@davidvasher6752 Did you make a video on it, or do you have plans for it.
@davidvasher6752
6 ай бұрын
I did not do a video on punisher skull. But if you want i will make one. I will put a detailed video out this weekend.
@ermannodangelo4087
6 ай бұрын
That would be awesome, looking forward to it.
@petejohnson9039
3 ай бұрын
How much does it weigh?
@davidvasher6752
3 ай бұрын
Never weighed it pete , ill say 25lbs.
@juancbarahona7544
Жыл бұрын
I am immigrant , came 20 years ago , I am learning to be an American now, I love your American flag, I will make one myself following your video and will subscribe to your channel . There is so much to learn watching your videos, thanks sir.
@davidvasher6752
Жыл бұрын
The reason i do videos is because i luv to teach what i know. You comment is much appreciated, keep on watchin theres more to come. 👍🥰🇺🇸
@juancbarahona7544
Жыл бұрын
Surely there is loads of knowledge coming from you I will deeply treasure.
@davidvasher6752
Жыл бұрын
@@juancbarahona7544 thank you sir
@johnmanfredo422
11 ай бұрын
awesome.
@davidvasher6752
11 ай бұрын
Ahhh, your still watching. Thanks john. Just curious, what wood you like to see built. 👍🇺🇸.patroit wise?
@edbratt4955
Жыл бұрын
love your work ... BUT... no push stick and your hand so close to the blade and a long sleeve flannel shirt to boot...you're a brave man
@davidvasher6752
Жыл бұрын
Hey ed, how you doin, IKnow, trying to be bit more safe for viewers. Been brought up in the shop with popps, been doing this as far back as i can remember, Ive been being more safety conscious in my videos. Thanks for watchin Ed. 👍🇺🇸🥰
@JoseHernandez-mj6ne
Жыл бұрын
Never mind lol should had waited
@jimtalbot5113
Жыл бұрын
Your videos are awesome. Shows every step of the way. Don't worry about negative comments your instructions are perfect. Keep up the great work.
@davidvasher6752
Жыл бұрын
Thanks so much for your comments. Trust me know worries over comments. Keep on watchin jim, more to come, 👍🇺🇸,Happy new year
@raelynnhamilton5750
8 ай бұрын
The long video is ok I just came across your Chanel I love it awesome project
@davidvasher6752
8 ай бұрын
Thank you so much. Another long one coming up soon, building a workbench desk.
@donmthg
Жыл бұрын
Another great video David! Thank you. I will be making some of these.
@davidvasher6752
Жыл бұрын
Thanks, its a long one, nut detailed. Be safe and enjoy the build👍🇺🇸
@TimothyCabe
Жыл бұрын
hey David , in the the valleys and craving what is the deepest you go down? Thanks
@davidvasher6752
Жыл бұрын
Hey tim, ill leave about an1"on the edges in places. Just make sure you dont go to deep around the french cleat area. You dont want to break through there. Thanks for watchin. 👍🇺🇸
@paulpeterson3624
Жыл бұрын
Thank you for the great video David, that looks like a project I will put on the list to do! Great instruction!
@davidvasher6752
Жыл бұрын
Thank you Paul. Glad you liked it. More to come. 👍🇺🇸
@TimothyCabe
Жыл бұрын
Great Job!!! I love It! what size Union stencil did you use?
@davidvasher6752
Жыл бұрын
Hey Tim. In the shop right now doing another one, the union is 15 by 10 1/2. Thanks for watchin . That was a long video. 👍🇺🇸
@Tbonz19
Жыл бұрын
Very nice. Thanks for sharing the way you make these wavy flags. I like the way you go about showing all the details and the use of a french cleat to hang the flag.
@davidvasher6752
Жыл бұрын
Thanks so much, I know my videos r long but its the only way to explain how to do it. Merry Christmas, and thanks. 👍🇺🇸🇺🇸🇺🇸
@krowwwmusic7005
11 ай бұрын
Great tutorial man. Love the shop! I’m building one for a marine vet and thinking about how I can add a marine seal in it!
@davidvasher6752
11 ай бұрын
Thanks for watching I would like to try a seal myself
@davidvasher6752
11 ай бұрын
Thanks for watching. Would like to do a seal myself, probably carve with dremel.
@markheld995
Жыл бұрын
Great video seems like you could make a bigger base for your router.
@davidvasher6752
Жыл бұрын
For sure
@killersqish9183
Жыл бұрын
Great video, M thank you and Merry Christmas!
@davidvasher6752
Жыл бұрын
Thanks for watching killer. Merry christmas
@lennielaxton8559
Жыл бұрын
Love the details that you add , leave them in ! That's how we want to see it !
@davidvasher6752
Жыл бұрын
Thank you my friend. Thanks for watching🇺🇸👍🤠
@BrianUnderhill-dx6fy
10 ай бұрын
Fantastic job and thank you for sharing!
@davidvasher6752
10 ай бұрын
Thank you for watching Brain. I have a hand made barbar pole video coming out soon. Watch that too!! 👍🇺🇸🇺🇸🇺🇸
@DaveEbert
10 ай бұрын
very good learning video thanks
@davidvasher6752
10 ай бұрын
Glad you enjoyed it dave. Start building my friend
@TimothyCabe
Жыл бұрын
Your Rockin' in the free World
@davidvasher6752
Жыл бұрын
Thanks Tim, 🕺👍🇺🇸
@JoseHernandez-mj6ne
Жыл бұрын
How much for the flag?
@davidvasher6752
Жыл бұрын
Wavy flags are $300.those too i just sell locally
@DrinkLikeAFishInAK
Жыл бұрын
You do very nice work. You're getting close to the 1,000 subscribers needed to start making some money from these videos. Best of luck in getting there quickly.
@davidvasher6752
Жыл бұрын
Thanks so much. Cant believe rverysones watchin. Merry chrismas
@anonymoose4046
11 ай бұрын
Would have been nice to see a white stain on the white stripes.
@davidvasher6752
11 ай бұрын
Thanks for watchin. I like the natural look much better. Other sites show white stain so.you could see it there. Hope u build one.
Пікірлер: 94