I managed to finally get it up and running and everything is in working order ^_^
@adrianmarkjesudass3128
4 жыл бұрын
This video was a ACE!!
@noeljacobs4816
3 жыл бұрын
It just took hours before the alpha terminal recognized and paired to my arduino and before it was fully operational and after that I followed the last steps on you’re video and my vpet is all set up and I can now send and create codes via the alpha terminal thank you so much for you’re help kind sir ^_^
@DrNorton
4 жыл бұрын
Cool video. Some explanations about what/why your doing this for would make this video better, even in the description.
@zarcha
4 жыл бұрын
Oh that's a good point. I had made it to post in the discord it's meant for but didn't even think about external people seeing it.
@zarcha
4 жыл бұрын
Added a description and discord link
@jhonryanyt
3 жыл бұрын
Could you do a tutorial on how to make the arduino work for W0RLD. because I can't seem to connect my A-Com and vpets to it and I'm not that tech savy.
@zarcha
3 жыл бұрын
JhonRyan White it might be best to join the discord and ask for help. I don’t play w0rld so I don’t know what could be wrong.
@astaroth0245
2 жыл бұрын
hello zack, I'm curious about the green plate that you show on the video, what it's called? the green plate that I mean appears at the start of the tutorial
@zarcha
2 жыл бұрын
its a PCB that mimics the contacts vpets have for easy connection.
@sweetgoose64
Жыл бұрын
Any idea what I do with an Arduino UNO with no legs? And what kind of connector could I solder on instead of using the wires?
@QuestionRealityStreetcars
27 күн бұрын
so i spent an hour looking for a board like yours to realize you cut the one side off..... can you cut both off and it still work? want to make mine as small as possible
@noeljacobs4816
3 жыл бұрын
How and where do I get the sketch and how do I get it into my arduino window like all that on ur screen I am confused
@leanbreaker7397
3 жыл бұрын
Hello! Excuseme but, is it possible build the A-COM without the protoboard/breadboard? I mean, with iron soldering.
@coregenesis4630
3 жыл бұрын
i follow exactly but when i connect to my vpet x, i cant get any data
@tranminhduong9788
2 жыл бұрын
Hello zack, is this tutorial video still relevant? Any changes in the components or web links that u provided? Super clear tutorial btw!
@zarcha
2 жыл бұрын
It's still accurate enough but I do plan to update it. The links in the video have changed and the updated ones are in the description.
@tranminhduong9788
2 жыл бұрын
@@zarcha Thanks! Will the new tutorial change much? I was JUST ABOUT to order all the things in this vid haha
@zarcha
2 жыл бұрын
@@tranminhduong9788 it only be updated links and going over things a bit neater, the core information and items won't change.
@george746
2 жыл бұрын
Which coms is the best or easiest to use? Like Acom, Dcom, or alphacom?
@HellBringer0
3 жыл бұрын
I got the two resistors from 2 different manufacturers, will it still work?
@erraddict
Жыл бұрын
I got my parts fr m aliexpress but I'm getting negative numbers returning in the monitor
@slavishentity6705
4 ай бұрын
What kind of wire do you use ?
@ditobi
Жыл бұрын
Hello I have the arduino but the difference is, mine have all the pins and you only have the necesary It's mandatory remove or desolder the other "pins"? pls help me.
@uchihasenjuu
3 жыл бұрын
When I initialise with V1-000, the output was s:0000 t:-3 . When I tried with an input for my vpet, it doesn't connect. May I know what's the issue?
@shawflygirl
3 жыл бұрын
Hey i have a fix for this now. I got my acom working with code converter and will test shortly with world. I had my wires connected in reverse to my digivice. The wire from a2 on the arduino goes to the front conenctor on the digivice and the wire from ground goes to the back connector plate. When using arduino, activate it using v1-0000 which with nothing connected shoud output 's: 0000 t: '. When your digivce is connected it should also output the same, if not then try reversing your connectors. Then when you're ready use ' V2-0904-0907-384E-008E-05AE-01EE-000E-000E-000E-@0^F^FE ' (paste it in but dont hit send just yet) as a test so when you select battle on your digivice, go through all the prep steps as you would if you were connecting two digivices, then hit enter on the code to send that code to your digivice. ad you shoudl get a response like below: s:0000 t s:0000 t s:0000 t s:0000 t s:0000 r:0904 got 28 bytes: s:0101 r:1332 s:0101 r:0002 -> N got 53 bytes: V1-0101-0101-800E-008E-05AE-01EE-000E-000E-000E-@0F0E -> V1-[10 packets] s:0101 r:0904 s:0101 r:0907 s:800E r:384E s:008E r:008E s:05AE r:05AE s:01EE r:01EE s:000E r:000E s:000E r:000E s:000E r:000E s:FF0E r:F0FE s:0101 t Use d-com code converter to get you signal out
@uchihasenjuu
3 жыл бұрын
@@shawflygirl Thanks for the solution. Apparently the cause of my issue was that I used the wrong resistor.
@terumikami5831
Жыл бұрын
Hello Zack, i just recently buy Arduino Nano Atmega168, i try to upload the .ino file but failed due to global variable consume more space about 145%. Are there any way to optimize the .ino file so that it can be uploaded into Nano 168?
@Ruslan.88266
3 жыл бұрын
I'm running linux on my computer, any ideas how to get alpha terminal?
@zarcha
3 жыл бұрын
Ideally as long as I followed instructions right, I produced a Linux appImage and it can be downloaded from the same place as the others, no idea if it works
@pedrogoncalvesneto2451
2 жыл бұрын
Hello, I have just made all the steps and everything worked fine! Thank you for this. So, I was doing a lot of battles tonight, until my vpet (a 20th bought last month) suddenly ran out of battery. It seems that the A-com could be drainning energy from the vpet. What could have caused this? What am I doing wrong?
@pedrogoncalvesneto2451
2 жыл бұрын
I took the battery off and on again and now is working fine, but it was showing a big battery with an X in the middle. I don't know if I'm doing this in a not safe way
@zarcha
2 жыл бұрын
If you are using the original battery then it will die very fast even without the a-com. The coms have no known impact on the devices as they act just as other vpet devices would when connected.
@zarcha
2 жыл бұрын
Taking the battery out and putting back in will only work for a short time because the voltage will go back up in the battery just a little because it’s not in use for a moment.
@pedrogoncalvesneto2451
2 жыл бұрын
@@zarcha Oh ok, I was kinda desperate, it's my first vpet. Thank you for the information
@SpookySquid14
3 жыл бұрын
Thinking of making one of these look like Izzy's laptop. Would that be possible?
@waterelementX
Жыл бұрын
In case you're still interested in this project, look up the Digimon Analyser / デジモンアナライザー for a shell you could use
@Aperekahaziq
3 жыл бұрын
I have mini v1..what should i do?
@zarcha
3 жыл бұрын
Mini’s use the DMX battle system and you connect the ground to on of the outer prongs and the data to the middle prong of the vpet
@DiMarie90
3 жыл бұрын
Hey, this may seem silly, but what are the dimensions on the A-Com? ^^ Thank you!!!
@Convoy7560
Жыл бұрын
About the wires, what are the best type? 20cm male to male is fine???
@Dilgoro
3 жыл бұрын
For some reason I simply cannot get it to upload to my board. At least it only cost me 30 bucks total. I’ve wasted a lot more on a lot less.
@zarcha
3 жыл бұрын
i dont know your specific issue for sure from that but most of the time people have issues uploading you arnt using the right com port, most of the time this is because you dont see the actual port since the computer doesnt see it. try installing the drivers i linked in the description.
@Dilgoro
3 жыл бұрын
@@zarcha that did it! Thank you very much man!
@swaydethomas
3 жыл бұрын
Do i need to remove the legs for this to work? The one im looking at has all the legs
@zarcha
3 жыл бұрын
It’s better having the legs in this case
@noeljacobs4816
3 жыл бұрын
I downloaded that file on alpha something launches but nothing happens lol
@leifex807
4 жыл бұрын
Does the arduino on Amazon come with the pins soldered?
@shawflygirl
3 жыл бұрын
I got mine off ebay for 4.95 which comes with all pins soldered
@magone3249
3 жыл бұрын
Hello pal! I am just now trying to set up my ACom and the "port" option in the tools manu isnt pressable, its gray too what is wrong?
@zarcha
3 жыл бұрын
you will probably need to get the drivers for the arduino board, i link them at the bottom of the description
@magone3249
3 жыл бұрын
@@zarcha Thanks alot for the fast reply! I will try tomorrow and i will inform you thanks!
@Daniel-dl6fp
3 жыл бұрын
300th subscriber
@shazam9582
Жыл бұрын
Do I need male to male or female to female jumper cables.
@zarcha
Жыл бұрын
Male to Male
@noeljacobs4816
3 жыл бұрын
What is the ino can’t find it
@curtispereira5212
3 жыл бұрын
Digimon tamers d-power digimodify!!!!!!
@JoseXiao94
3 жыл бұрын
Arduino uno works?
@jacintodesousa6780
3 жыл бұрын
Brazil/ Show Video
@14bqdonk
Жыл бұрын
damn
@noeljacobs4816
3 жыл бұрын
Is there a way for us to get in contact via face time or messenger to video call I am from Belgium and not really know anything about a pc files downloads etc I feel so stupid gosh =/
@noeljacobs4816
3 жыл бұрын
I did manage to put my a-com together though and it’s hooked up now I am stuck =/
@zarcha
3 жыл бұрын
@@noeljacobs4816 the best idea is to join the discord for quick help since there are many people. the invite link is in my description.
@noeljacobs4816
3 жыл бұрын
@@zarcha I don’t have a phone nr I can’t make a discord account I need to make a new google email adress but need a phone to do so because I can’t log in to my gmail because the device ain’t recognized and I can’t verify it’s me because I got no phone or phone number
@shawflygirl
3 жыл бұрын
I keep getting s: 0000 t:-3 and no idea why
@mamsweek
3 жыл бұрын
same here.. not working.. always -3, do u figure out the problems?
@carltownsend8307
3 жыл бұрын
@@mamsweek I got the parts today and I'm having exact same issue :( Were you able to figure it out ?
@mamsweek
3 жыл бұрын
@@carltownsend8307 still not working.. tried using another cable also the same.. its like arduino not give feedbck to laptop
Пікірлер: 70