Somethin positve to think about .😊Merry christmas. 😊will soon be hete.
@thechristmaslightguy
10 ай бұрын
Happy holidays!
@kaylavdb3877
9 ай бұрын
How do you bend the pvc pipe for the arch?
@thechristmaslightguy
9 ай бұрын
I used 1 inch PEX tubing which was in a 100 ft roll. I used a piece of rope to measure each pipe the same length. Hold the rope on the outside edge to measure. Once I cut the PEX tubing the length I build the bases and attached. I left mine sit in the sun for about few days until the shape was the same on each arch. I’ve seen people build jigs and use a heat gun or fill the tubing with hot sand to get the shape the same.
@WYO_Cowboy_Joe
Жыл бұрын
Some good ideas, but you need to practice your video presentation skills a lot more before the red light starts blinking. Reading your text from the computer screen is not quite the same as a teleprompter and unless you have one, you'd be better off just KNOWING what it is you want to say and then use BULLET POINTS to keep yourself on track. The important thing is the information, not the 5 minutes. So if you can do it all in 3 or if it ends up taking 7 or 8, there is no time limit to live with.
@thechristmaslightguy
Жыл бұрын
Thanks Tom - This was one of my first videos and I have gotten much better at presenting. I hope check out some of my recent videos.
Пікірлер: 6