Hi everyone! I no longer sell this kit. I am leaving the video up for educational purposes. I am working on full size cans now! vibrolabs.com instagram.com/vibrolabs Need support? Try reddit.com/r/DIEMs
@gteam2
5 жыл бұрын
Can you provide a bit of info on. Sourcing the components for people who light want to try their hand at doing it DIY
@DIYearphone
5 жыл бұрын
@@gteam2 Your regional audiology supplier will be able to get you what you need! Pick up the phone and make a new friend.
@CastleMisha
4 жыл бұрын
DIYearphone Like a Dr Fauci Snout face mask? (Fauci-Snouts ♥️) order yours toady *shameless Plug*
@user-ou2md4nr4y
3 жыл бұрын
Nice video, very informative. Can you post videos on designing cans and making custom cushions for them..
@johnnychang4233
Жыл бұрын
20:00 Aren't the filter tubes flip from one side of the sets of balance armatures?
@Wheel333
7 жыл бұрын
Started searching for custom earbuds, ended up here. Really impressed thanks for sharing.
@DIYearphone
7 жыл бұрын
Glad you enjoyed. Cheers!
@mesri3
5 жыл бұрын
Wow. Loved every second of this video. Couldn't help wondering at how many places I would have messed it up ... especially in the gluing section.
@oddjobbobb
4 жыл бұрын
You may not be following this thread, but your soldering technique is really amazing.
@8882monkey
6 жыл бұрын
Thanks for your sharing. Looking forward to the new tutorials.
@TaterGrabbinBass
3 жыл бұрын
Wow, that’s very cool! I’m looking for a pair of custom earbuds like this so I can wear them with a motorcycle helmet. I’ve found a few different ways to do this but these look like they’d seal good and they look like they’d be flush when they’re in ear. I found a company called Ultimate Ears but their products are crazy expensive! Anyways, this was a very cool video!
@MichalRohal
5 жыл бұрын
Have you considered mounting twopins in the shell and after inserting BAs and tubing in, trimming cables down to avoid extessive cablework inside the shell? If so and you prefer not to do it, any particular reason, why leaving them at their original lenghts would be preferable?
@valcic1993
Жыл бұрын
Can have diferent of sound if you put damper forward or back
@andreypalivoda9602
6 жыл бұрын
Great guide! Thank You, Man!
@neyzenilkay
8 жыл бұрын
Awesome! Good video full of details!
@elisanchez2276
Жыл бұрын
That’s so impressive
@arongatt
7 жыл бұрын
awesome build
@RaphaelDantas
8 ай бұрын
Hi Dude! Will I have problems If I fill the shell with Resin with this kind of BA? Thanks!
@r0r0r0j
8 жыл бұрын
Thank you! Can you provide some photo of the new tubing style build? Just to make sure I'm doing it in the right way!
@DIYearphone
8 жыл бұрын
subscribe to my newsletter on DIYearphone.com (bottom of the page), I'll be updating this video soon
@r0r0r0j
8 жыл бұрын
Done! Is there another recommendation to soldering in normal armatures without PCB/crossover (like ED)? I meant is necessary pre-tinned just the cable or the terminal need to be pre-tinned as well? Do you use flux or something like that?
@DIYearphone
8 жыл бұрын
The silver-plated copper litz wire on DIYearphone.com is all ready to go, no preparation is necessary. If you wish to DIY your own hookup wire, pick up a small spool of insulated litz wire. Cut to length and put a blob of solder on the end of your soldering iron and use that to tin the litz. General recommendation for homebrew armature bundle is to use 0-20Ω resistor in series with woofers and 0-10µF capacitor in series with tweeters. Use 2200-3300Ω dampers on woofers and 660-1500Ω on tweeters
@jthunderbass1
7 жыл бұрын
I'm gonna do this some day!
@Icefalkon
7 жыл бұрын
Hey man, GREAT VIDEO!
@TCTheGreat
2 жыл бұрын
question: is there ever tuning or adjusting the values of the damper or anything like that? or u just put everything in there and it will be done?
@will-ye
8 жыл бұрын
Really hope the DIY CIEM movement takes off... CIEMS are too expensive. Would be great for more low-cost kits to start popping up.
@t76d777f6d
8 жыл бұрын
+Will Y I do sell a $199 kit that is everything except for the armatures. Those can be purchased at DigiKey for around $50-$100 a side. Works out to a nice price and you can build whatever you want. My shells are 3d printed with the recessed jack integrated which is a nice upgrade over a hand poured shell.
@will-ye
8 жыл бұрын
+taiden I've seen the site, yes. I can't afford it atm though, maybe in the future. What 3D printer do you use?
@DIYearphone
8 жыл бұрын
+Will Y We decided to sub out this work to someone who has been making medical equipment for over 50 years. They've been 3d printing since the late 90s and I was lucky to find them. It's an industrial stereolithography printer and they have a shellmaking office in-house. Cheers
@danielwells7358
6 жыл бұрын
Awesome video.
@samuelvargas2239
4 жыл бұрын
Yo me quedé con ganas de la prueba de sonido
@Dylman121
7 жыл бұрын
Is there a way to make this work with recessed sockets? Also, you said to use the larger tubing for the entire thing. Will it fit through the holes in the shell? Or would I need to use the smaller tubing for the end as well?
@DIYearphone
7 жыл бұрын
DIYearphone CIEM shells can be assembled with the sockets in either a recessed or flush configuration. The larger tubing fits the bores. Taper the ends and dip them in alcohol and they will slide right in.
@doluseb
8 жыл бұрын
it looks like your kits now contain only a plain faceplate. do you have other options for faceplates or suggestions for materials?
@DIYearphone
5 жыл бұрын
Knife scales!
@animalbeats
6 жыл бұрын
Thank you!
@valcic1993
Жыл бұрын
Why one big tube? What with dampers?
@LifeOnHoth
6 жыл бұрын
"black on the inside. *sigh* "- hehe I get you! That thing is some tiny stuff to work with in front of a camera :P
@o6957
4 жыл бұрын
Hello, could you tell me why it is better to use a large tube for the entire run instead of using a smaller one as in the video? I’m trying to make my own iem and found the nozzle part of my mold is way too narrow to punch two holes for the large tube.. If I use a small tube like the video, does the sound become worse?
@McLOVIN.....
3 жыл бұрын
Que tan delicados son los BA para las caídas?
@Ruzarik
7 жыл бұрын
you didn't show you you got your shells formed/shaped. please elaborate?
@sq3rjick
6 жыл бұрын
Ruzarik They are 3D printed, scanned from impressions taken in silicone impression material by an audiologist
@nasrudinafiq5202
Жыл бұрын
Hi sir, 12:00 what the material pad name?. Seems like a clay. Thanks
@jonathanevans-ul2im
Жыл бұрын
Do you know where I can get parts to make my own?
@isabellafloresv7036
2 жыл бұрын
Where else can I buy those components since Mears closed operations?
@Chicas272
8 жыл бұрын
good stuff thanks!
@vanalbertson8999
6 жыл бұрын
The filter in acustic tube, is there a just fine mash? What can I use instead? Thanks.
@paulosilva8200
3 жыл бұрын
I wonder if the filter is close to the driver to create more speed because air has more speed there and then after the dumper filter to create a balloon with the pipe. By heating with a lighter for a second and then blow to create a cavity balloon that can act like a cabinet speaker. And then the 2 driver having the balloon a bit more closer to create different harmonised tone. Mmmmm I am thinking. 1 x13mm dd for the bass guitar. 1 bass balance for the drums. 1 balance for the mids one dd 6mm for the mids. 1 x 3mm dd from the highs and one est for the highs. Set fz same as the graf for the mangird iem xeuus model. Mmm
@StickySli
6 жыл бұрын
Is heatshrink a good alternative to the tubing you're using? I have a WBFK 30019 without a snout and I neat to heatshrink it around the driver.
@jaimeb.384
5 жыл бұрын
How much would be one of these home made? Do they sound better than retail highends such as SE846?
@valcic1993
Жыл бұрын
For what is use damper?
@ShanoMoments
6 жыл бұрын
Hey man, can you tell what are the sizes of the tubes please? thank you!
@kirkrobinson11
8 жыл бұрын
Great vid! Do you know what value the resistor and cap is on the GK? Thanks
@MrRubyxp
7 жыл бұрын
Do you mind sharing the resource about the crossover circuit. I can't find much helpful links online. Thanks in advance!!
@joshuacabiles4578
3 жыл бұрын
What's the purpose of acoustic dampers?
@vishnuaudiotech8147
8 жыл бұрын
hi vibro labs .... thanks for your video ....m working on 3 way custom IEM and cant able to find iem crossovers. can u help me out on this topic.
@DIYearphone
8 жыл бұрын
Hard to say without more info. You can get a lot done simply with resistors to lower the output of specific drivers. Use a capacitor in parallel to reduce highs and in series to reduce lows. Be careful of phase offsets from capacitors. Makes use of dampers!! Good luck
@jdmnc1209
5 жыл бұрын
Try Seltech for the best pricing of Knowles balanced armatures.
@vladimirzuz931
3 жыл бұрын
Are all your links broken? Do you still make headphones?
@JamespMusic
7 жыл бұрын
Hi where do you get the shells? How to make them? Or do you order them?
@DIYearphone
7 жыл бұрын
We sell earphone shells and kits. diyearphone.com
@ats1995
6 жыл бұрын
DIYearphone I'm having trouble finding shells atm. Do you still sell them, and how does that work?
@oops9070
6 жыл бұрын
@@ats1995 you can eather go to a audioligest to get an inpression of your ear or buy them
@WilliamRodriguesBatista
2 жыл бұрын
Hello!! where do I get the drivers or auto speakers? grateful!
@Chicas272
7 жыл бұрын
Why only 1 damper on each driver (tweeter) ?
@martinoporto8676
7 жыл бұрын
A question: that speakers are almost as good as speaker of any knowers brands like UE or VIO or any other brand? The quality sound are like which price range?
@jodok7386
5 жыл бұрын
Sorry this is a little bit late, but this speaker is used in many known brands
@martinoporto8676
5 жыл бұрын
@@jodok7386 Thank You!
@borjok536
8 жыл бұрын
what are the sizes of the small and tge large tubing respectively?
@DIYearphone
8 жыл бұрын
NAEL #13 standard and NAEL #16 thin
@anthonysilva5312
8 жыл бұрын
Wow. Impressive!! What would they cost to buy?
@stacksmasher
8 жыл бұрын
$40 each. You can get shells with screws off eBay to put them in and if you mess up they come apart easy to fix.
@AngelPercusion19
8 жыл бұрын
hello, greetings from Panama ! Where I can get the speakers, I only need the audio system and can not find in panama ! I appreciate your response!
@liberatorkramit
3 жыл бұрын
Im bummed he didnt hook up a cable and hold it to the mic. I believe they work, but just for a "Fuck yeah!" type of moment.
@user-qk1ul9pb4u
4 жыл бұрын
wait... But where do you get the shells ready?
@Vtrontv
5 жыл бұрын
How does it sound compared to the near priced Chifi iem?
@jamesl.9776
Жыл бұрын
question: how do you tune the drivers?
@valcic1993
Жыл бұрын
Why i need damper?
@kls3730
9 жыл бұрын
How do you do to make it the shape of the connector in the mold?
@DIYearphone
9 жыл бұрын
+KLAUDIO P Hi there, our shells are 3d printed which means we can add that feature. :)
@kls3730
9 жыл бұрын
+Vibro Labs tks!!!
@nellatl
7 жыл бұрын
DIYearphone does the number of ba drivers really matter?
@johnmicheal3904
5 жыл бұрын
What does the sound compare too?
@Chicas272
7 жыл бұрын
question??? what do you know about apex technology and have you done one before? Is there a guide or a video you know of? It looks easy but I just want to do it right :)
@DIYearphone
7 жыл бұрын
I have no experience with APEX technology.
@Chicas272
7 жыл бұрын
:( ok... looks pretty easy to do... hopefully it works out. thanks
@honfungwong592
5 жыл бұрын
hi I would like to ask how can I tune the sound of the earphone? (in detail) the empty space in the earphone will affect the sound? do i need to fill the empty space?
@DIYearphone
5 жыл бұрын
The empty space doesn't change anything for balanced armature earphones. If you have vented drivers you do need double the case volume in back volume, otherwise you lose bass.
@honfungwong592
5 жыл бұрын
@@DIYearphone can you describe you ciem sound quality that you made?
@valcic1993
Жыл бұрын
Where you buy
@fabianrosch4455
3 жыл бұрын
Hey , where can i buy these cool faceplates ?
@madmaxkal
8 жыл бұрын
I am a little confused. From vibrolabs.com- "Tubing is sold as 1 foot (30cm) of large tubing and 2 inch (5cm) of small tubing." In the video it seems that you use hardly any large tubing and tons of small tubing. Is the product description incorrect or am I confused about something?
@DIYearphone
8 жыл бұрын
It's a change of method that isn't well documented, that's my fault. I recommend using the least amount of small tubing as possible. Usually only as a bushing, or maybe 1/4" on the GK/HE armature assemblies. If you use the small tubing for the whole run you can get attenuated high frequencies.
@madmaxkal
8 жыл бұрын
Thanks for the quick response. I sincerely hope that description wasn't there all along. In any case, great informative video. I'm pretty excited about building these and I will definitely order some parts from you. Making the shell seems too fun to outsource so Ill have to figure that part out myself. Im pumped!
@DIYearphone
8 жыл бұрын
> I sincerely hope that description wasn't there all along. What do you mean? The shell is a lot of fun to make, and you can make them over and over again! Definitely a great way to go. I only recommend my shells if you want something super easy, professional, and more durable. It also saves you a lot of money if you're only making a few, because there are so many tools you can skip.
@madmaxkal
8 жыл бұрын
I just noticed the description answered my original question.
@DIYearphone
8 жыл бұрын
Ahhh, no worries!
@galgogergo
6 жыл бұрын
how/where did you get the shells from?
@GoogleAccount-jx7kt
6 жыл бұрын
Where can I buy a kit to build my own at home,
@TheBoyboy321
8 жыл бұрын
wow i love this video. it is very educational ^^ gave me a good idea on how to assemble a pair of ciem. Just have a question. The crossover which is attached to the drivers. Do you guys make it or does it come along with the drivers?
@DIYearphone
8 жыл бұрын
+TheBoyboy321 The Knowles GK has this crossover built into it, that's why we strongly recommend it as a first build! :)
@ulrikejakel9668
8 жыл бұрын
+Vibro Labs I´m proud, you have seen www.mcear.de
@DIYearphone
8 жыл бұрын
+Wilfried Jäkel I have now! Thanks for the link. Much appreciated, sir!
@Chicas272
8 жыл бұрын
what type of dampers should i use? whats the diffrence ?
@DIYearphone
8 жыл бұрын
In general, use 1500Ω on tweeters, and 2200Ω on woofers. As you increase the acoustic resistance, high frequencies will drop. Good luck!
@Chicas272
7 жыл бұрын
Thanks! :)
@adrianc1587
8 жыл бұрын
where did you get the speakers and do you do other people eim?
@DIYearphone
8 жыл бұрын
I recommend people buy speakers from Digikey and get used to ordering from them! DIYearphone does not do completed builds at this time.
@Chicas272
7 жыл бұрын
questin? why not 4 dampers ? Thank you
@OsmiumStudios
7 жыл бұрын
What's the damper that you used here? and where can I get the tubing?
@DIYearphone
7 жыл бұрын
1500Ω on high and 3300Ω on low is a decent starting point. I would recommend spending time on the dampers yourself to find what you like. We sell tubing at DIYearphone.com
@Cobaltickle
7 жыл бұрын
the question now is hows the sound?
@DIYearphone
7 жыл бұрын
If you trust your ears you can tune these to match your preferences.
@Cobaltickle
7 жыл бұрын
i see, well im not really a big fan of eq's as i usually let my iems dictate their own style as (imo) this makes them unique
@Zech-ij8jm
7 жыл бұрын
I think he means tune with filters and tubing and shells
@MyElune
8 жыл бұрын
God damn that was awesome. Where'd you get the components like BAs, wires, and dampers from?
@DIYearphone
8 жыл бұрын
+Brandon Fong Hey Brandon, BAs and dampers can be bought at Digikey or Mouser. Also check out reddit.com/r/diems :)
@davidjeong_dj
7 жыл бұрын
When is the new video coming out?
@DIYearphone
7 жыл бұрын
It will be a few weeks anyway, I need to get the D4 quad preorders in first.
@chadwu2042
8 жыл бұрын
Hello ,really like the facrplates u use in the vid,i was wondering where could.i get them or perhaps do you sell them?
@chadwu2042
8 жыл бұрын
+Vibro Labs okay thanks
@willclausen1814
7 жыл бұрын
What do you do if you need to reshell them?
@DIYearphone
7 жыл бұрын
Installation is the reverse of removal!
@willclausen1814
7 жыл бұрын
DIYearphone I guess what I meant was how do you remove the epoxy after it hardens?
@DIYearphone
7 жыл бұрын
With force! We usually give epoxy joints a squeeze with flush cutters.
@willclausen1814
7 жыл бұрын
DIYearphone thanks! I didn't realize you could pull it apart. I thought it would be a huge pain.
@DIYearphone
7 жыл бұрын
If you really want to be able to take it apart, use Bondic.
@kidndadmotovlog9898
5 жыл бұрын
The website is already closed 😩. Do you have facebook page?
@niccerkadoabuckado8256
3 жыл бұрын
O positional accuracy 0 soundstage
@michaellam6612
5 жыл бұрын
updated tutorials?
@DroidLocks6971
2 жыл бұрын
When I Watch This It Shows How absurd It Is For Let's Say KZ To Say Their Are 4 and 5 B.A. Drivers In An IEM MUCH LESS WORKING DRIVERS
@Mrmekane
8 жыл бұрын
何言ってんのか分かんねぇ、こういう時英語力が欲しいと思う。
@Chicas272
7 жыл бұрын
Why only 1 damper on each driver (tweeter) ?
@DIYearphone
7 жыл бұрын
Most earphones are built with one damper per armature spout. If your project calls for more, you are outside the scope of this video and 99% of all earphone builds.
@Chicas272
7 жыл бұрын
Great thank you... I want to understand why only one damper :?) thanks again for the reply
@AngelPercusion19
8 жыл бұрын
hello, greetings from Panama ! Where I can get the speakers, I only need the audio system and can not find in panama ! I appreciate your response!
Пікірлер: 145