How to Build a Long Range LED RF Meter (Cheap & Easy) Link Below : kzitem.info/news/bejne/yYB-0WGwpqF3daAsi=ap_3iDpobd3kcKon
@yurialtunin9121
19 күн бұрын
Is the speaker cable you use shielded or not? I like your design it is simple and effective.
@crazyham
19 күн бұрын
Yes the cable is covered with some sort of plastic. (Insulated) It doesn't have an additional shielding like coax though ! A simple a two conductor cable that isn't bare copper so it can't be shorted out between the windings. Thanks for the question my friend. 73 from Crazy Ham ⚡🙏⚡
@KI5WWD
2 ай бұрын
Enjoyed your video and instructions! I am gathering parts to build, and I have 1N34A diodes. Is this OK to use instead of the 1N60P diodes? Also, where in the circuit would you add the potentiometer and what value? Thanks Don KI5WWD
@crazyham
2 ай бұрын
Hi my friend & thanks for your comment. You can connect a potentiometer between either the positive or the negative DC side that leads to the meter terminal. Example, interrupt the connection to the positive terminal of the meter with a potentiometer. I suggest approx 100K ohm Potentiometer. I suspect the 1N34A diodes would give a similar result but I suspect that a genuine 1N60P germanium diode might be a tad more efficient at higher frequencies but I am not 100% sure. Be careful as there are plenty of fake 1N60P diodes for sale that are really Silicon diodes. (You can also leave out the inductor if you want as it is a little bit of overkill. It was to ensure that the system only worked as a dipole. It will still be sensitive and useful without the inductor.) Let me know how you go with the project mate & 73 from Australia 🇦🇺
@crazyham
2 ай бұрын
PS: Take a look at my latest video on how to build a sensitive LED RF field strength meter : kzitem.info/news/bejne/yYB-0WGwpqF3daAsi=5bHeZJGtLodY2gSA
@KI5WWD
Ай бұрын
@@crazyham Finished building and testing -works great! I didn't need to use the 100k pot, and the 1N34A germanium diodes seems to work well. I used it as a "show and tell" at our local ham meeting today and the response from the members was loaded with questions! I referred them to your You Tube website, but I had to take the back of the box apart to show them the actual components. Our president was fascinated using his HT at various positions and angles and viewing the results. I used a large 100 micro amp meter, the 4 IN34A germanium diodes, a plastic box, and parts of "rabbit ear" TV antenna. Aprox $27 Thanks for giving the world a great, easy project! 73 Don
@crazyham
Ай бұрын
I'm so pleased that you had a great success with the project Don. That is awesome the club members were very interested too. I really appreciate you coming back to share your outcome too. Maybe you can build the next one for show and tell at the Club too? it is an LED rf meter. It is my latest video on KZitem. Thanks again Don. 73 de VK3VKe (Epoch) ⚡🙏⚡
@robertdejonge3607
Жыл бұрын
This is great! Im going to build one to locate antenna / connector / RG-213 cable trouble on marine vhf uhf equipment. Thanks for sharing!
@crazyham
Жыл бұрын
Excellent my friend. Yeah it will be useful for finding RF on cables etc. Let me know how you go. 73 de VK3VKe ⚡🙏⚡
@robertdejonge3607
Жыл бұрын
@@crazyham I will let you know! ;)
@robertdejonge3607
Жыл бұрын
Received my parts yesterday and hooked it up as follows. I stripped one meter of coax cable ( the one you use for tv). Wrapped the core in a coil arround a small piece of wood (pencil size diameter). The piece of wood has the same length as the meter. For me it is important to be pocket size. Connected one end of the coil to the meter directly and connected the other end of the coil with only 1 resisitor in between to the meter. Tested it with VHF handheld radio (really close by) and it works perfect! To keep everything nice together I covered it with transparant silicone. The complete build is not bigger than the meter itself. For me this will be really useful to find bad connectors, antenna's and RG-214 cables with water intrusion on Marine VHF radio's. Thanks for the idea! 👍👊
@crazyham
Жыл бұрын
@@robertdejonge3607 That is Fantastic to Hear my Friend 🙏 Excellent. Thanks so much for letting me know too. 73 de VK3VKe Crazy Ham ⚡🙏⚡
@crazyham
Жыл бұрын
@@robertdejonge3607 If you end up putting up a video about your build, I would love to see it too ⚡🙏⚡
@kf5hcr176
2 жыл бұрын
Passive DF, Nicely presented
@crazyham
Жыл бұрын
Thanks my Friend 🙏
@mrobarton7192
2 жыл бұрын
Good job mate! Anything special about the germaniums other than low forward bias voltage? Can you use Schottky diodes?
@crazyham
Жыл бұрын
I just noticed my reply isn't showing but I am certain I replied some time ago. Schottky should work fine, But I suspect the Germaniams will work better for this 🙏
@partsguy9423
2 ай бұрын
Would there be a way to attenuate the signal?
@crazyham
Ай бұрын
Yes, You can place a potentiometer between the Positive side that connects to the meters positive terminal. (100K OHm or higher). If you look up my latest video on how to build an led rf meter it shows how to connect the potentiometer. It has a similar circuit except for the LED Board & an On Off Switch. Link Below: kzitem.info/news/bejne/yYB-0WGwpqF3daAsi=ap_3iDpobd3kcKon
@seniorchief48
7 ай бұрын
What is the function of the toroid?
@seniorchief48
7 ай бұрын
Answered my own question by paying attention to the teacher. . .🤣
@n5yiz
2 жыл бұрын
cool
@josealonsorodriguezsalaice3232
Жыл бұрын
kool video ,mtr crazy ham
@crazyham
Жыл бұрын
Thank You My Friend ⚡🙏⚡ Check out my recent videos on a Simple Common Mode Current Meter 🙏
@mohammadalfauomey3443
11 ай бұрын
What is the value of the capacitor ? Thanks
@crazyham
11 ай бұрын
Hi there, if you choose to use a capacitor, it's best to have a very low value to avoid meter lagging. Maybe around 10pF or less But it works fine without any additional Capacitor added. I don't recall the exact value I had on this one as it's not at all critical. You could for example use 1uF instead of pF but they are larger. If you go too high in value it takes more time to charge the cap and dampens the meter movement. 73 my friend ⚡🙏⚡
@hulkgqnissanpatrol6121
Жыл бұрын
I'm so in over my head in my journey in radio's and Rf frequency tuning ect that I'm getting to a place in my head that is conflicting with everything I'm reading online as most articles are by enthusiasts that have their own way's. I can't learn like that. Does anyone have any online book recommendations? Preferably free PDF? 🤔 Thanks for this. I saved it foe later experiments, can it be used at the receiver end instead?
@crazyham
Жыл бұрын
Hi my Friend. This type of passive (un-amplified) meter is only good for being close to a transmitting antenna and would be too insensitive for a receiver in the distance . The whole world of Radio has many rabbit holes and some of them are never ending as we still don't know everything in the world of physics. It's best to figure out what you personally want to achieve and then take it from there & If you are wanting to become a radio Ham then here in Australia we have the Radio & Electronics School of Australia which is a Helpful Online Resource & there would be many other helpful resources in different parts of the world too. If in Australia, here is the link to the RES res.net.au/ and if in the USA I would look up the ARRL and see what they can offer or in UK look up RSGB. Personally I would suggest to take everything one step at a time & at your leisure. Best Regards mate & I wish I could have been more helpful.
@hulkgqnissanpatrol6121
Жыл бұрын
@@crazyham more than helpful mate thanks heaps, I'll definitely look into that link and might even see if the local club is doing any meets at the repeater on Mt tassie. Thanks again mate
@crazyham
Жыл бұрын
@@hulkgqnissanpatrol6121 Ok, Excellent , I wasn't sure if you were VK based or not. I can Vouch for the RES & Ron Bertrand , The Founder is an Awesome Human Being. It is Totally None Profit and all in the interest of those interested in the field of electronics and radio. 73 my friend ⚡🙏⚡
@hulkgqnissanpatrol6121
Жыл бұрын
@@crazyham VK3BEZ is the club call sign. Thanks again mate
@crazyham
Жыл бұрын
Are you a member & would you say they are a good club? I haven't gave clubs much thought in recent years but it would be nice to connect with other like minded folks. Where is the Club Based ?
@chriskopec1858
2 жыл бұрын
❤👍🐺
@osamafarg9895
2 жыл бұрын
Please, diode 4148 can work?
@osamafarg9895
2 жыл бұрын
What value of capacitor, and thanks for your replying
@crazyham
Жыл бұрын
It seems my reply has disappeared. I am sure I replied some time ago lol. I am not sure about the diode your referred to. The capacitor isn't critical, but a very low value would be ok, or even no capacitor should be fine as there is some none linear capacitance across the 4 diodes. 🙏
@dtmty
Жыл бұрын
i wish to buy one of this, how do i can get one? or a reference item on ebay / amazon ?
@crazyham
Жыл бұрын
Hi my Friend. What are you looking to Buy? This is a how to Build video and the components required are very inexpensive.
@dtmty
Жыл бұрын
@@crazyham yes indeed, and also is cheap to purchase a new one, but what I would have better to also know the frecuency. so not just strenght but also HF related to the strenght
@crazyham
Жыл бұрын
@@dtmty I suggest buying a cheap pocket oscilloscope and adapt an antenna with a suitable bnc connection to connect to the scope and then you have full info including frequency, magnitudes etc and a very broad range.
@crazyham
Жыл бұрын
Of course , it depends on what frequency range you are interested in. I mostly play with HF and find this little thing very good for HF. au-m.banggood.com/MUSTOOL-MDS120M-Professional-Digital-Oscilloscope-120MHz-Analog-Bandwidth-500MS-or-s-Sampling-Rate-320x240-LCD-Screen-Support-Waveform-Storage-with-Backlight-p-1759856.html?gmcCountry=AU&PLA-AU-all-220415-massa¤cy=AUD&cur_warehouse=CN&createTmp=1&ad_id=593197213431&gclid=EAIaIQobChMIvL35p9ia_AIVVAQrCh2bqwEQEAQYASABEgK01_D_BwE
@dtmty
Жыл бұрын
@@crazyham thank you a lot, I really appreciate your reply
@NZhTI
7 ай бұрын
BUT HOW NO ELECTRIC A WORK?
@crazyham
7 ай бұрын
I'm sorry, I don't understand your Question ?
@Pelixu
7 ай бұрын
I have an idea of what they're saying, " how is it working without any electricity?" @@crazyham
@crazyham
7 ай бұрын
Thank You 🙏 The antenna elements receive the rf signal and the diodes rectify the alternating currents into direct currents to drive the meter 👌⚡👌
@DE-ke2rf
5 ай бұрын
.001 uf cap should be ok.
@crazyham
5 ай бұрын
Yes, absolutely. Or No added Cap is fine too. I have used as high as 1uF without too much lag though from experience there is no need for a cap at all.
Пікірлер: 53