wow a lot of really great information here. Its great you sorted out the bearing issue. So we now get a professional built Axial flux turbine with warranty for a real price. Good news. Thank you
@Larry342516
10 жыл бұрын
I give you guys a lot of credit for always trying to improve your product. Most companies out there invest then sell till they make a big profit before improving. You guys go all out to bring the customer a quality product. Hope you got your patent pending Jeff... LOL. There are those watching this video that would steal it in a minute. Take care and great job. Thanks for the video.
@MissouriWindandSolar
10 жыл бұрын
Your welcome and thanks. Those guys have put there heart and sole into the Air Boss axial flux wind turbine and i'am just glad those guys choose me to be a part of it.
@Larry342516
10 жыл бұрын
MissouriWindandSolar Yes you are, and they are lucky to be dealing with a honest man. Which is hard to come by nowadays.
@ian57812
10 жыл бұрын
Totally impressed with Air Boss axial flux design and set up.
@MissouriWindandSolar
10 жыл бұрын
Yes, it is well built for sure. Those guys have really got a commercial unit built.
@richarddowner4292
10 жыл бұрын
GREAT VIDEO JEFF, NICE TO SEE HOW IT ALL WORKS!!! thanks for the very educational video.. thank u
@MissouriWindandSolar
10 жыл бұрын
Richard Downer Thanks Richard. It could have been a lot longer but i figured that no one would want to sit through all of it.
@richarddowner4292
10 жыл бұрын
hey when it comes to learning, Time = smarter :-) the more you learn, the smarter you are. great video thank you Jeff...
@DaOneNOnly-fi4iv
10 жыл бұрын
Best looking setup out there Jeff! This vid shows how much care and thought went into building the product! I only wish I had one now to put up!
@MissouriWindandSolar
10 жыл бұрын
Gary and his crew have worked on the Air Boss for 8 years now, that's dedication for sure.
@ScottStClair-dm6vk
7 жыл бұрын
That's a trailer hub w/spindle,good bearings for what it's being used for,flat bearings are for something with no twisting forces!
@bvbjb
10 жыл бұрын
GREAT video!!! Thank you for sharing.
@MissouriWindandSolar
10 жыл бұрын
Your welcome Bert.
@Roel922
3 жыл бұрын
I have also build my own axial flux generator. It is almost finished. I have had some electricity production by spinning it with my hands I got 4,5V and 0,5A at low RPM ofcourse. The stator mold was'nt perfect since it has some air bubbles in the resin and some resin leaked away from my mold but the coils are completly molded and it did it's job. Now I'm going to poor resin over my magnet rotors to make them water proof. And the turbine blades I'm also working on. Then it's ready to go outside and make some windpower. It's going to be VAWT turbine. For HAWT turbines I prever to use radial flux generators which I also made earlyer on.
@michaelblock4397
8 жыл бұрын
This is sure a, classy production, operation!
@shawhit3462
10 жыл бұрын
Great field trip, thanks Jeff.
@davidcoupalbergeron2
Жыл бұрын
If you want to make life time bearing it's conic roller bearing with a light preload
@craigslist04
10 жыл бұрын
Great video Jeff. Too bad I live in a city with little to no wind, but we have lots of sunshine. ;-)
@ChileExpatFamily
10 жыл бұрын
I saw the air boss install and it was pretty tall for the windmill. It was neat to see that set up and it is cool that you used what you had on hand to make it work. Are the windmills maintenance free? Those mold parts look really strong and I really do want one of those Air Boss. Would it help if the spinner cover was more aerodynamic like on an aircraft?
@warrior9086
10 жыл бұрын
Hi Guys, great video, Like the subject of the AFG and have been followinf quiet a bunch of vids on building. Unfortunatly all the projects are in prototype stage or like some say "garage projects". Seems to me that there is a lot of future in this design and lot´s of people are in need of serious power. By that I mean it´s time to take that design out of the garage and to the next stage and get a production model going, because many people don´t have the skills/tools to built one by their own. So it will not be enough to have some guys building these AFGs in there garage to come up with decent production Nº. This requires a different set up. So I shure agree You are on the right track to take the AFG to the next level and get a production model going. That will improve quality and bring the price down and make it more accesable for others. I love seeing You getting involved in tool design and it looks very good. Being involved in tool design I recomand You get all the info You can get on that subject. That will enable You to adapt/change Your idears acc. to needs....and fast. Do some research on RAPID PROTOTYPING technics and materials. This is also a beautifull and interesting science but most of all it will bring down Your costs. Subcontracting production tools up road is expensive. These technics will help You to find the cheapest method for the purpose and desired production Nº. .....more revolutions to the evolution Good Luck on the Odyssey
@muneerahmed7215
5 жыл бұрын
what is the grade of neodymium magnets do you use in generator??
@derekthegreatgonzo
10 жыл бұрын
I now understand the difference between the air boss turbines and the other ones made like that. they have taken a lot of steps in the right directions to be sure their turbines are designed right, where the others just send you the parts and you have to figure it out. those should be amazing turbines. what is the price range going to be on these?
@danieljenks1693
3 жыл бұрын
You hiring? I would love to work there!!
@robertmwhidbey
10 жыл бұрын
Great video, I want a 2800 at my place......One question why wood blades? Why not another material?
@MissouriWindandSolar
10 жыл бұрын
Good question, were working on composite blades to replace the wood blades. The wood blades are suppose to last 10 to 15 years.
@jayturn5325
10 жыл бұрын
Hey guys, excellent information as always. My question is where can I help. I am certified in Applied Science with a drafting degree and in need of some direction. 38 with daughter and willing to relocate.
@MissouriWindandSolar
10 жыл бұрын
That's a new one, job app on KZitem. So you want to work in the alternative energy field ?
@jayturn5325
10 жыл бұрын
MissouriWindandSolar Not just work but live it as well. I know this is not the normal way, but maybe the chance of pointing me in the right direction. Just looking for a crack in a door somewhere. The good lord has left me with borrowed time and I need to accomplish my diminished dream of living grid free. Thank you for anything.
@SkyMaxWind
10 жыл бұрын
Nice wind turbine
@فيصلالسرحان-ب6ف
2 жыл бұрын
تعليم نظري وعملي فعلي 💐👌💪
@vinishshetty8055
7 жыл бұрын
Airboss generators seems to be costly compared to your pmg generators, does your generator support helical vertical fans?
@MissouriWindandSolar
7 жыл бұрын
Yes they are costly and we decided not to sell them. Yes our PMG would work on a Vawt.
@great0523a
10 жыл бұрын
How much is the price range for this new wind turbine?
@marioguma3700
5 жыл бұрын
Do you sale generator like this?
@Jeepollllllo
10 жыл бұрын
Great tour. Thanks for sharing. olllllllllo
@MissouriWindandSolar
10 жыл бұрын
Your welcome Jon
@vasilepreser5412
2 жыл бұрын
Imi place este un inverter bun
@kelliherjcowdensr.9711
9 жыл бұрын
Looks like the Air Boss is a Kiss copy of Hugh Piggot's / Other power axial flux wind turbines.. Wooden blades/ All threads to hold things together. An improvement, but still crude. I have found that the stator is very time consuming to manufacture. I use a 13.4 ft. tip dia. and it produces 40 amps at 48+ volts. It folds at that point.
@MATTE.U.K
8 жыл бұрын
+kelliher j cowden Sr. where can i get hold of one?
@danieleo.40
7 жыл бұрын
price for realize one?
@johnotoole5644
10 жыл бұрын
awsome, thanks
@windturbinetricksandhacks222
5 жыл бұрын
Nice
@clarkeugene5727
10 жыл бұрын
Hey, where is the high rise office building attached to a 50,000 sq ft warehouse? This is solid proof that ordinary citizens are capable of serious production. And I don't see any security guards protecting their SECRET knowledge. Bless them for sharing it with us.
@MissouriWindandSolar
10 жыл бұрын
Thanks Clark Yes, just real guys all dedicated to making a beautiful working machine. They all have real pride in there work for sure. The video could have been hours long to, man i cut out a lot.Clark Eugene
@moacir315
4 жыл бұрын
LEGAL MUITO BOM
@maryrhodes5925
10 жыл бұрын
Great video, thanks for sharing the new technology with us,,,my chickens are more excited about the BAK......BAK........BAK......BOOOOOOOSTA!!!!
@MissouriWindandSolar
10 жыл бұрын
Give me a week or two and i'll have the other parts to that system.
@maryrhodes5925
10 жыл бұрын
got one turbine up, 4 panels, red tags on the front farm meters,solar shed is adjacent to chicken coop .......!!!!!!! BUCK.......BUCK......BUCK......BOOOOOOOOSTER!!!!!!!!!!!!!!...COME SEE US AND WE WILL VENT A CARGO CONTAINER, A PREPPERS DREAM!!!!!!
@فيصلالسرحان-ب6ف
2 жыл бұрын
ناس جناس 🚦💎💐👌⚖️
@MATTE.U.K
8 жыл бұрын
guys i'm looking for a trusted Axial Flux Permanent Magnet Alternator can anyone help?
@MissouriWindandSolar
8 жыл бұрын
+SQUAREHEAD Don't know of any. I can tell you the Genesis is not a good one neither is the Air Boss.
@MATTE.U.K
8 жыл бұрын
+MissouriWindandSolar Hey, can you explain why you don't think either one can be trusted?
@MissouriWindandSolar
8 жыл бұрын
+SQUAREHEAD The guy that makes the Genesis does them from his home and there is no consistency to them at all. The Air Boss is not being manufactured by anyone at this time. The guy that says he has them doesn't.
@siakonaplegbommou4120
3 жыл бұрын
Good evening Sir I really wish to contact you in private for crucial information for me
@rajgondaannasorajgondaanna9796
2 жыл бұрын
India selling product 1 kw / 5 kw wind generator charge controller Amazon all product
Пікірлер: 60