Clock mainspring winders can cost hundreds of dollars. I didn't want to spend hundreds of dollars on a mainspring winder when I just work on clocks for fun as a hobby. So, I decided to make my own. It's not complicated and it can be built for well under $100.
Note:
I made this mainspring winder using tools I already had in my woodshop.
I used a:
- table saw to make the Rabbet Joints.
- router table to round over the edges.
- miter saw to adjust the length of the wood.
- lathe to make wood to wrap the crank handle.
- drill and forstner bits to drill the holes.
Most of what I decided to do did not need to be done. If you don't have all of these tools, that's ok. You could just make the mainspring winder with a saw and a drill. You also don't need to do exactly what I did. Do what makes sense to you given the tools you have, how you want it to look and how much time you want to spend on it.
In this video you'll see:
- How to make a clock mainspring winder
- How to wind and unwind loop-end clock mainsprings using a clock mainspring winder.
I hope you liked this video. Please feel free to like, comment, and subscribe. :)
SUBSCRIBE:
/ @watchoverhaul
------------------------------------------------------------------------------------------------------
Some of these links are Amazon affiliate links to the equipment or tools used for these videos, and purchasing anything through them helps support the channel at no extra cost to you.
MAINSPRING WINDER PART LIST:
4" Gate Hook ($4.47)
www.lowes.com/...
Thumb Screws ($1.43) www.lowes.com/...
Acorn Nuts ($1.28) www.lowes.com/...
3/8" x 1 1/2" Pipe ($2.38) www.lowes.com/...
3/8" 90 Degree Elbow (2 @ $2.38 = $4.76) www.lowes.com/...
3/8" Pipe Cap ($2.18) www.lowes.com/...
3/8" Flange ($2.24) www.lowes.com/...
3/8" x 6" Pipe ($4.88) www.lowes.com/...
3/8" x 3' Aluminum Rod ($7.00) www.lowes.com/...
Cabinet Handle ($3.98)
www.lowes.com/...
Bosch 1/4" Tap Wrench ($6.99)
amzn.to/3PH0lrG
1" x 48" Dowel ($5.43) www.lowes.com/...
Cotter Pins ($0.98) www.lowes.com/...
E-Z Loc Threaded Insert (25 Pack) ($11.25) amzn.to/3LnwykV
E-Z Loc Drive Tool ($10.00)
amzn.to/3Lo9h2r
2" x 4" x 8' Stud ($3.98) www.lowes.com/...
J-B Weld ($6.54)
amzn.to/3LnhNic
Total: $79.77
VIDEO AND AUDIO:
Main Camera, Galaxy S20+ Smart Phone: amzn.to/3Uaulw6
InShot Pro: inshotapp.page...
ADDITIONAL PRODUCTS:
Honeywell Face Shield: amzn.to/3QYpR9a
Nitrile Gloves: amzn.to/3qFu1b1
Nylon Zip Ties: amzn.to/3qIJkA0
#mainspringwinder #diy #homemade #clock #clockrestoration #satisfying #clockmainspringwinder #howto #mainspring
Негізгі бет How To Build This Clock Mainspring Winder Under $80
Пікірлер: 39