for the test bench config, the sidepanel with IO should be on the bottom, not on the top.
@azfarfitri
9 ай бұрын
this is probably the first video I've seen showing where HDD could fit. thank you so much.
@ShadowsNight1000
9 ай бұрын
Hopefully I can save someone here before it's too late! These cases will only fit 1 High Capacity 3.5inch HDD! From what I can tell anything over 4TB might have the new "alternate" hole spacing and won't fit 3 of the 4 HDD location on this case... COOLER MASTER It'd be great if you could update the product info on your website XD PS: If you end up making a second revision or something similar, I know it'd eat one of the cable management tracks but I can't see why we couldn't have 2, 3.5's mounted where SSD's go (connector side facing "up"), It'd take an extra 2 holes (Or 4 of you wanted to include both types of 3.5 drives). Would be cool for the media pc's ;)
@constantinosschinas4503
10 ай бұрын
The case is thick enough so that the PSU could be placed horizontaly, exhaling to the front. That would make space so that 280mm AIO could be placed along with a long GPU. In any case, the part symmetry of this case makes it a very nice candidate for custom builds with user made parts.
@ranagustavo29
6 ай бұрын
The only limitation I see is having good airflow with many hard drives. Coolermaste told me that it is possible to mount 2 SSDs and 5 3.5 HDDs (my current configuration) but it did not tell me that if I mount 7 hard drives it is impossible to install fans. A bit dissapointed.
@justanobody4983
8 ай бұрын
Should i be using a matx if i want to place the psu at the bottom? And where do you route the cables from the psu? Is there a provision for that? This case looks like fun.
@coolermasteronline
8 ай бұрын
MATX motherboard with ATX PSU will block some connectors (USB9 pins or ARGB RGB header), so it's not recommended. MATX motherboard with SFX PSU should be fine to install. ITX motherboard with ATX PSU/SFX PSU will also be fine.
@justanobody4983
8 ай бұрын
@@coolermasteronline thank you for the response! Will look into those options.
@psoasx_7260
9 ай бұрын
is there a way to get a second steel panel? i'm not a fan of TG.
@coolermasteronline
8 ай бұрын
Please create a support ticket with [Part Request] in the title: account.coolermaster.com/Modules/eRMA/Salesforce/CreateCaseNew.aspx Or check the Cooler Master Store in your region: store.coolermaster.com/ Or contact the Cooler Master social media team in or closest to your region about availability: coolermaster.com/social-media/
@lucaxtta
11 ай бұрын
Where is the ncore 100max?????
@coolermasteronline
11 ай бұрын
The Ncore 100 MAX is planned to launch in November. Be sure to follow us for all the latest news and updates.
@mikeshobbiesandrandomstuff
4 ай бұрын
We want the accessories and more side panels sold separately so we can customize more. Also the handles as well. I bought the black version and love it so far.
@KaiynFallanx
Күн бұрын
Where did you get the bar used for vertical mounting the GPU?
@1tzelG_
Ай бұрын
3D printable of the vertical bracket? PLEASE. I HAVE MASTERBOX 5 AND I WANT TO MOUNT EVERYTHING ON VERTICAL BEHIND THE GPU:'(
@F-Bomb313
2 ай бұрын
I was actually going to buy this case, but the fact you cannot buy replacements parts such as a mesh side panel (to replace the glass one) or an extra carrying handle has detoured me from it. It makes zero sense to put rad mount up against glass, again, we need an extra mesh side panel....smdh
@streetguru9350
11 ай бұрын
Need a review from Gamersnexus ASAP
@buriedbits6027
Ай бұрын
I would like to purchase accessories separately. I want to be able to part ways with the glass.
@mikeshobbiesandrandomstuff
4 ай бұрын
The power cable extension needs to be made a thicker guage for 1200 watts psu as well.
@TearfulNight
4 ай бұрын
crazy case ever build .. I bought it the 2nd day as soon as I saw this on 1st day night lol .. I am really impressed with the price for quality and building this case have many possibilities .. fun to build as well as easy to repair latter
@blobert1461
7 ай бұрын
What's up with all the holes? Some of us live with roaches that would climb into the case and these holes are large enough for mice and small rats.
@ЛучСвета-б9к
6 ай бұрын
Lol співчуваю бро
@Creep4EverMV588
11 ай бұрын
Will there be an option to buy another black handle separately? The black version of the case comes with just one right now
@GAZuOOT
11 ай бұрын
Also what about spare mesh panel?
@coolermasteronline
11 ай бұрын
There are plans to offer different parts on the CM Stores at a later date. store.coolermaster.com/us/ store.coolermaster.eu/
@Creep4EverMV588
10 ай бұрын
Can I get a rough estimate when those would be available for this case?
@eaqiie
4 ай бұрын
Cooler Master, do you plan on selling seperate mesh or glass panels in the future? There's a lot of people who want either two window or two mesh sidepanels. I am trying to find someone nearby who wants to trade his mesh panel for my window panel but no luck so far.
@ChrisM541
5 ай бұрын
Question: do you have a video showing an E-ATX build in this case? I can't find any, on this channel or anywhere else. I want to know how this size of MB plus a 240mm radiator and standard size PSU, and a couple of case fans, are accommodated.
@Zaira36531
7 ай бұрын
12:44 I forget to say that to mount fans you have to change the back cover for the glass one. glass lid will not let air in/out 12:44 olvido decir que para montar ventiladores tiene que cambiar la tapa trasera por la de cristal. tapa de cristal no dejara salir/meter aire
@Oiratset
8 ай бұрын
I think the build quality of the footings is not that great. The clips that suppose to hold it in place just snapped on one of my footings. I had to use super glue to fix it. It would be also be nice to sell those separately in the future.
@timsburg
7 ай бұрын
Are there addressed holes at the bottom/top panels to secure the riser jack portion of the gpu vertical mount configuration? The video passed the plugging in of the gpu or any screwing in of the riser assembly.
@eaqiie
4 ай бұрын
Are the top and bottom plates reverseable and replaceable?
@jjj6444
6 ай бұрын
For the 'southpaw' layout (inverted layout), I noticed that the front panel I/O ports and start button, is facing downward. Will it be possible to connect thumb drive or USB cable via front I/O in southpaw layout without stressing the connection? After setting the southpaw layout, Is it possible to flip the front panel upside down to have the USB port facing upward again?
@harrys.stamper4116
6 ай бұрын
Thats in my mind. The IO panel facing the ground . That makes no sense. If you turn the front Panel around, the cables have no holes to go behind the mainboard. My brain is struggling. You have to push the power button at this angle ? And the USB ports and audio ports are gone ? Come on Coolermaster ?
@AB-ez4rm
9 ай бұрын
This new design has potential to add a whole new rage for consumers to enjoy.
@heroicsquirrel3195
11 ай бұрын
If the airflow is good i think im gonna get this case asap, seems pretty much perfect
@AndersHass
11 ай бұрын
Nice to see a more in-depth overview of the various configurations
@edithnamitala-ws6tk
9 ай бұрын
When is the nr200 upgrade going to be released 😊
@coolermasteronline
9 ай бұрын
No ETA at the moment. But hopefully soon.
@alless8
10 ай бұрын
I can use x670e taichi there?
@coolermasteronline
10 ай бұрын
There is support for eATX boards. But there are limits (Width up to 296mm w/ SFX PSU, up to 273 w/ ATX PSU).
@catch2030
11 ай бұрын
Personally not a fan of the aesthetic of the case but it does seem fairly well thought out to allow for many different layouts and setups. Plus it builds on the rather poor Q500L and Q300L while actually providing airflow this time around. May not sell well but definitely could lay a groundwork for features to be added to other cases!
@alexo7796
11 ай бұрын
Зачем нужны мелкие воздушные фильтры, если сзади оставили дупло 5х20см?
@coolermasteronline
11 ай бұрын
Sorry, I don't understand the question.
@videolux4111
10 ай бұрын
@@coolermasteronline Nice, you loser.
@mr.bigdick7692
8 ай бұрын
I have a big CPU cooler, I can't mount a 140mm case fan in side panel (left side), it bumps to the CPU cooler. What to do? Can i install a 80mm or 92mm case fan instead?
@wherearemytesticles
10 ай бұрын
What is the clearance on the bottom PSU mount? Is there space between the MB tray and the PSU if an ATX PSU is installed? I wonder if a Corsair RMx Shift PSU will fit there.
@coolermasteronline
9 ай бұрын
It's possible to use an ATX PSU in the front, but not in the bottom. Also, keep in mind the following: *An ATX board CAN'T be installed with an ATX/SFX PSU that is installed at the bottom of the Qube 500. *An ITX board CAN be installed with an ATX/SFX PSU installed at the bottom. *A MATX board CAN be installed with a SFX PSU installed at the bottom. Pic with ITX board: imgur.com/a/e21EQoB Pic with MATX board: imgur.com/a/VvGhePW
Пікірлер: 50