My son just moved back to Oregon from Green Bay! I wish I would have discovered your channel before he moved to have you guys connect! Big walleye fishery out here on the Columbia River. Large numbers of walleye and BIG smallies!
@terrybaca4095
Жыл бұрын
Great stuff!
@kenbrown5449
7 ай бұрын
Great video.. Thanks!
@M_Gagz5
11 күн бұрын
Great vid, What size beads are typical for the harness ?
@CodyS
11 күн бұрын
Typically 6mm
@danward2490
Жыл бұрын
Good one. I’m 69 and I’ve been making my own harnesses for many years. I’m partial to slow death hooks and flouro for line.
@triptodd5963
5 ай бұрын
Do you ever add lead weights, if so where in line do you put them and what kind ?
@CodyS
5 ай бұрын
In-Line weights from time to time, normally a couple feet in front of the crawler harness.
@TonioFishing
4 ай бұрын
Where did you get your box??
@dannyjohnson2402
Жыл бұрын
QUICK CHANGE RELEASE CLIPS - can't find them - got a suggestion?
@CodyS
Жыл бұрын
Check out northland tackle
@Aaron_mik_fishing
Жыл бұрын
Can you cast these with a spinning rod? Asking for a friend....
@CodyS
Жыл бұрын
Yup
@Aaron_mik_fishing
Жыл бұрын
@@CodyS sick
@JDW-h4q
6 ай бұрын
What is the best length ?
@CodyS
6 ай бұрын
Leader length doesn’t really matter. I typically will run about 3-4’
@ericarneil9598
Жыл бұрын
My buddy owns Warrior Lures. They also custom paint crank baits for walleye and they have a line of their own spoons for salmon and trout as well. I use their custom painted Berkly Flicker Shads for walleye and smallies.. Oh and the have spinner blades for your crawler harnesses as well. Check them out online..
@HJSmotors
17 күн бұрын
A good harness that I use and I highly recommend is a gold hook at the bottom and a red hook above with two purple beads and two green beads with the clevis then a green and purple blade
@marklucas449
4 ай бұрын
I like how Cody is thorough but not wordy... direct and to the point.
@CodyS
4 ай бұрын
Thanks!
@keaganstewart3523
Ай бұрын
great video thank you.
@Doggo703
Жыл бұрын
Hi I love watching your vids and it is so cool watching you catch all these fish
@keaganstewart3523
Ай бұрын
how far up line do you tie weight/
@CodyS
Ай бұрын
I typically use snap weights. Otherwise the weight will normally sit in front of the swivel or loop.
@LuRanOutdoors
Жыл бұрын
Thanks for the video man!! Very helpful!!
@nicholasdeluca3580
11 ай бұрын
Nice n simple. I've fished for Walleye on Greers Ferry Lake in Arkansas. You may have heard it has world record catches of Walleye .... YES in central Arkansas. My good friend Phillip Stepp lived here for a short while, super cold day (for here 17°) Phil n I go fishing, he taught me ALOT about Walleye, he lives in Duluth Minnesota. I totally fell in love with trolling and casting where creeks meet main rivers, it almost killed me to let this HOG go due to slot regulations. Anyway, really enjoyed listening and watching you. Thanks, Nick in Redfield Arkansas
@mattanderson353
5 ай бұрын
Cody, in your walleye harness video, you show your box of blades, there are a couple of colors I see in there that I would like to get for my own collection, anyway I could get a color of them if I showed you and perhaps a place to order? Thanks Matt
@mikematson153
7 ай бұрын
Use Dutch fork No Loss Clevises...you will throw those plastic ones away !
@GabbyFaust
3 ай бұрын
Thank youuuu! So helpful! Can’t wait to try out them tricks and maybe see you out on the water!
@mochachinolatte4397
3 ай бұрын
Good vid
@MittenJim
Жыл бұрын
Good solid video. Well done!
@artlehrer7085
Жыл бұрын
Thanks
@robertanderson2436
8 ай бұрын
Cody. I just started making harnesses for lake erie east end. I found a 10" long blunt end hypodermic needle. It is 0.050 dia with a 0.025 hole through the center. I select my beadsand clevis put them on the tube. Feed the leader through hold the line slide off beads pull leafer out and add finish. For frayed used leader i cut off barrel insert line through pull until besds are at tube work besds on tube pull out leader make a new one finsh just like making a new harness for us old guys who rule the eye sight its hard to put the leader through the bead hole. Question on your box of blades is that a compete kit you can purchase I f so whete. I like it.thanks got to go i just got a hit.
@CodyS
8 ай бұрын
This is a backwater customs blade box.
@ohiofarmer254
10 ай бұрын
we have really good luck with #6 colorado blades antifreeze backed works great. my go to color is spiked lemonade from Galeforce Tackel
@CodyS
10 ай бұрын
Sweet!! I’ll have to try em out!
@teamextremefishing
Жыл бұрын
Great info Cody! Question do you prefer inline weights or bouncers?
@CodyS
Жыл бұрын
I prefer to use snap weights!
@teamextremefishing
Жыл бұрын
@CodyS ok? Is that better than inlines?? Sorry new to the trolling game.
@TravisInCanada1
2 ай бұрын
Knew all of this, watched it anyway and now you have a new subscriber 😀 Excellent video.
@CodyS
2 ай бұрын
Thanks!
@rickburgei9225
9 ай бұрын
What size of barrel swivels do you recommend?
@CodyS
8 ай бұрын
Normally a #1 is fine. Personal preference!
@erikbeckwith2571
Жыл бұрын
Cody, what size is that Plano box that fits the pool noodles? There’s a similar Plano at menards, but it looked much deeper than the dia of a noodle…
@CodyS
Жыл бұрын
I believe this is just the Plano XL pro Latch not the XXL
@erikbeckwith2571
Жыл бұрын
@@CodyS Thanks! Yeah, my Menards has the XXL, and it looked way too big!!!
Пікірлер: 47