He left out the assembly process to the boat! The most important aspect of this project!
@carpspudpicker3031
4 жыл бұрын
Looks like a school project your kid would do in shop class then give you for your birthday!
@HarryScanlan
Жыл бұрын
😂😂 right? This is terrible.
@joelw2023
8 жыл бұрын
dont have that dude do your fiberglass work. wow
@thierryg3049
8 жыл бұрын
What's the point of painting 2 or 3 layers of expensive Perfection plus the primer paint if you are going to cover it up???
@filmshoot35
5 жыл бұрын
How much did this weigh compared to the teak platform?
@jonness8927
7 ай бұрын
Geta MASK on Dude!
@TIMEtoRIDE900
2 жыл бұрын
I built this exact platform, but had to substitute construction grade foam and Bondo products. Didn't have epoxy-grade paints so I used RustOleum. I found some cork-board at Office Depot and used black RTV from Discount. Then I sealed it all with some Spar Varnish which is UV protected. I'm at about $48 before buying some brackets and screws, so I can afford Stainless.
@TheDivergentDrummer
4 жыл бұрын
If Wix were to make swim platforms, they would look like that......
@frankgeraci3233
6 ай бұрын
What did it cost to make. Also how much time. Thank you
@tysonristau4995
2 ай бұрын
Did he say how much it weighs when finished?
@markpaskett3696
3 жыл бұрын
That looks awesome. do you still have the boat? How has the platform held up?
@TheGoshood
3 жыл бұрын
nice deck. I'm starting mine soon. Thanks for the vid.
@ProBrosMac
5 жыл бұрын
One question. Is there a material or resin that could have been used to cover the existing teak wood platform? If there is why not just do that?
@rdprdputube
5 жыл бұрын
You used composites, really should have rolled on gel coat instead of paint. Especially while the fiberglass was still tacky!
@sergiyvoloshchuk9011
Жыл бұрын
No close up look of finished product
@jasonmcelwee1257
9 жыл бұрын
What was the core material you used called?
@thatsmedonnyg
8 жыл бұрын
+Jason McElwee high density coosa board. had to google it a couple times but i found it. cheers!
@MushuPuma
6 жыл бұрын
Thank you! I was looking up "High Density Cruiser Board"(what I was certain he was saying), and kept coming up with longboards or High Density Urethane Board.
@paulodene5101
8 жыл бұрын
i tried to build this with styrofoam and bondo. it swelled and my kids foot went thrugh it.
@hd42gaming54
4 жыл бұрын
paul Odene plz don’t tell me your are serious 😂😂
@cadillacman8223
4 жыл бұрын
Should have used duct tape and popsicle sticks
@nickarigit
Жыл бұрын
Put the fiberglass down my God if anybody wants a good tip, don't let this guy work on your boat. Lighter glass would have made your project turn out a lot better. When using the bubble roller the trick is minimal pressure and keep it moving fast the quicker the better but once again very little pressure.
@aslynnhallett7542
3 жыл бұрын
Now u know why it's 5k to do this by professionals this guy should swim 🏊♂️with the sharks
@xMeta4x
5 жыл бұрын
That looks awful!
@jtravis30
4 жыл бұрын
Really awful lol
@hildablanco1591
2 жыл бұрын
Do too currupt politicians all quality resins and paints are not allowed in the USA only in south America
@cadillacman8223
4 жыл бұрын
I could do better with duct tape and some popsicle sticks... could have just sanded and epoxied the teak. Couple days work equals years of beauty
@BigMkombe
6 жыл бұрын
WTF IS THIS FOR REAL???
@debradubose6055
5 ай бұрын
Stick with teak!
@Orion2023.
Жыл бұрын
50ft work!
@bradshymon8012
4 жыл бұрын
Yes everybody, replace your natural teak with a tone of unnecessary chemicals and glued wood dust, it's very easy you only need time and a bit of money then you have an awful platform to be ashamed of. Btw, could you please post the list of the products in the order you used them? I can't remember more than 3-5 layers of stuff!
Пікірлер: 37