You are the best at giving directions! Thanks so much for the video.
@firoznanji1771
2 жыл бұрын
Very well explained. I have 2007 Nissan Qashqai, 1.5dci , wanted to set my turbo. Thank You
@abolfazljalambadani7669
2 ай бұрын
This video is very very helped to all.best regards🙏🙏🙏🙏🙏
@adtvchannel3
6 ай бұрын
super well explained
@aiden7328
2 жыл бұрын
Best way to set up an actuator is a mityvac with the correct settings well done
@radeek4395
Ай бұрын
i have shortened the Actuator fully but it would still needed to be shorter little bit. Do you think that the spring in the actuator need to be replaced? it still leaks the pressure under the load.
@orogenbolom
7 ай бұрын
Does a malfuction wastegate,meaning not opening can make exhaut gas backflow into engine thru valve via ex manifold?
@bryandemonteverde6563
3 ай бұрын
From philippines..can you.add..external spring.to add load.?
@iphone-uz8vc
2 ай бұрын
can that be done in vgt turbo as well
@stuungar3390
Жыл бұрын
Thanks 😊
@joaoteixeira9376
Жыл бұрын
Hello. Audi A3 8L 1.9TDI (110hp AHF Engine) doesnt make any difference adjusting the wastegate actuator in terms of boost. It has the original garret turbo, and the actuator is working fine as I have tested (n75 valve) with VAG and it works. What am I missing? Thanks
@4X4equals16
Жыл бұрын
brain, turobo is spooled by exhaust gas not magic, without program it wont let u overboost gl
@doganyilmaz_92
Жыл бұрын
What happens if you remove black pipe between actuator and outlet
@m6dspartan903
Жыл бұрын
Ecu will probably cut off throttle so you don't overboost
@Fred_Durst1
4 күн бұрын
hey thanks for the instructions. if I just turn the arm, instead of taking off the clip, will it damage the wastegate actuator?
@jcee1979
4 ай бұрын
Do I still need to use a computer to calibrate?
@sabrinabarrineau4394
Жыл бұрын
Does this apply to all turbos
@TrellArchie
6 ай бұрын
Does it apply to dd15
@Highwayvillian.
Жыл бұрын
Can you delete the waste gate actuator if your manifolds has an external aftermarket wastegate spot that also put pressure on the actual wastegate that come with the turbo
@AutoRevisieOutOftheBOX
Ай бұрын
my aculator is operated with vacuum not pressure, so I don't understand it
@calebwilkins7193
Ай бұрын
This is a diesel turbo. No vaccum.
@gsdhillon4453
Жыл бұрын
Mine bmw 328i 2013 has this thing loose ..should i need to change full turbo ? Mechanic said to change full turbo for 2300$
@norensoker8053
Жыл бұрын
mechanic want ur money
@subliminal9144
2 жыл бұрын
Is this safe to do?
@DieselPowerSource
2 жыл бұрын
Yes it is.
@mersuman6395
Жыл бұрын
Hey. I have such a problem that sometimes after faster acceleration at idle and at low revs, the boost pressure gauge shows negative pressures until I press the gas and the pressures rise again. This usually happens when the car is started when it is warm, never when the engine is cold. Where is the problem?
@DieselPowerSource
Жыл бұрын
Check for boost leaks as it should never be a negative boost level. Check your gauges have good connections
@mersuman6395
Жыл бұрын
@@DieselPowerSource Thank you for answering me. I've gone through all the turbo pipes and the boost gauge hose, and I couldn't find a leak. could the fault be caused by the swirlflaps that are in the intake manifold. after examining the leak points, I removed the intake manifold because oil is leaking from under it. I noticed that one of these swirlflap has disappeared.
@gavyndawson3907
Жыл бұрын
@@mersuman6395 there should be negative pressure when off gas and at idle. Mine is at -30 off gas and at idle -20. But for my gti probably a little bit different for whatever you have
@DuBstep115
Жыл бұрын
@@DieselPowerSource What? -0.5bar of vacuum is standard for any car at idle
@DuBstep115
Жыл бұрын
@@mersuman6395 Turhaan etit mitää vuotoja, kaikissa autoissa on tyjäkäynnillä puoli baaria vakuumia aka -0.5bar
@RioTintoGoAwayFromDrinaRiver
Жыл бұрын
Zaboravio si da zavrneš osiguravajuću maticu. Ona nije slučajno tu.
@anacletodeluca8194
2 жыл бұрын
Americans always make the example of guns, even with aircompression
@hondaxl250k0
Жыл бұрын
Because guns are awesome.. guns are the great equalizer.. god did not create all men equal.. mr Colt did. 👍🏻🇺🇸👍🏻
@yekyawhtet2799
2 жыл бұрын
La ou ha ha
@alphabetgpt4
2 жыл бұрын
Sebutannya politik air hangat
@alphabetgpt4
2 жыл бұрын
Sementara pemanas memakai dinamo-54 bukan tutupnya generator-133
@technigel9627
Жыл бұрын
Thank you for this video
@edrianjeromeg.samson5642
2 ай бұрын
THANK YOU SO MUCH
@randberr
11 ай бұрын
I took the mounting nuts off the wastegate and wedged it with a nickel and now have boost all the time even after 5000 rpm
@geroldbernaljr2602
5 ай бұрын
You blow it up yet!
@randberr
5 ай бұрын
@@geroldbernaljr2602 Still running great!!!
@vladimirkrtinic7098
9 ай бұрын
On my e60 525d acutator making beep sound after I turn engine of and making misfire down power in higher revs?
@ZackZaqZakXah
5 ай бұрын
Is it necessary to lubricate the shaft (rod) linkage at the entrance to the vacuum housing and where the e-clip is located?
@headtungsram6920
4 ай бұрын
So if your factory boost pressure is 30 psi than the wastegate should start moving at this pressure?
@paulmickle1135
Жыл бұрын
I pretty sure those c clips are easily lost
@merrillmillsjr7923
Жыл бұрын
When your truck is off is the waste gate in the open or closed position?
@DieselPowerSource
Жыл бұрын
It is in the closed position.
@alphabetgpt4
2 жыл бұрын
Sebutannya bukan
@alphabetgpt4
2 жыл бұрын
Sebutannya bukan
@atoxb4939
Жыл бұрын
Mine has been rattling and I will do this process tomorrow but, should I tighten it?
@Nathansss365
3 ай бұрын
How did you get on ? Mine is rattling to
@harisonedwards7315
3 жыл бұрын
Hey guys, my tbd doesnt have any lock nuts on the actuator, is the turbo made to be “fixed” or am I missing something? Cheers
@DieselPowerSource
2 жыл бұрын
With or without the lock nuts, you can still turn the rod with some pliers. the lock nuts just make it easier to grab a hold of.
@meditatestaycalm8321
2 жыл бұрын
What nobody answered you? I have Cummins 5.9 same not enough Eastgate action, new turbo. .50 mph max...ugh
@Daverodd06
Жыл бұрын
@@DieselPowerSource I only have one lock nut stainless diesel 63/67 turbo on a 1995 dodge Ram 2500 Can I use plyers to shorten it?
@fredastaire6156
11 ай бұрын
this is super helpful! Thank you for posting this I was about to return my TiAL Wastegate because I though it didnt fit right, lol!
@HobbyLifeStyleZone
18 күн бұрын
Wdym?
@HobbyLifeStyleZone
18 күн бұрын
What did you end up doing?
@agostinodipisa7302
2 жыл бұрын
👍👍
@mikebrewer5255
2 жыл бұрын
Come fix mine sounds to hard for a dummy like me I have a boost leak won't blow back through I think waste gate stuck closed
@seanmichael374
7 ай бұрын
Turn your bass down, mids up. I can hardly hear ya.
@alphabetgpt4
2 жыл бұрын
Generator listrik sekadar untuk mempercepat saja.. Misalnya dari 20km/h jadinya 154km/h
@junkemails5050
11 ай бұрын
Does this apply to a turbo on mk4 jetta tdi 1999.5?
Пікірлер: 66