Once the Smart Wi-Fi TV Backlight has successfully paired off with the application you will be directed to the “Device setup instructions” interface.
Carefully read the onscreen instructions to ensure the device will be ready to start setup.
Then tap “Next”.
Select the position where you started the installation of the device on the back of the TV, but as seen from the front side of the TV. In this example, the installation started on the bottom right corner.
Tap “Nexxt”
Now confirm whether the light strip was mounted following a clockwise or counterclockwise direction, also relative to the front side of the TV.
Tap “Next”
You will now see the oval shape of the TV as seen from the camera's perspective. Tap the 8 anchors or reference points on the image to confirm them one by one and add them to the calibration guide, as indicated below.
When you’re done, tap “Next step”
If you need to modify any anchor point you can touch it to delete it.
Go to the Next Step.
On the Screen Position Calibration interface, you will see an image of the TV screen from the camera viewpoint.
Confirm the anchor points designated in the previous step by tapping the image in exactly the same places.
Once the 8 anchor points have been confirmed, tap “Next”.
Now observe the demo of the calibration, that is, of the synchronization of TV content and backlighting effects. If the result is not satisfactory, return to the previous steps to reconfigure.
If the backlighting effect synchronization is correct, then tap “Complete”.
Now, with calibration and syncing complete, you can start customizing other functions and features of your Smart Wi-Fi TV Backlight.
With this, you have learned how to calibrate and synchronize your Smart Wi-Fi TV Backlight via the Nexxt Home app.
Негізгі бет Ғылым және технология HOW TO CALIBRATE AND SYNCHRONIZE YOUR SMART WI-FI TV BACKLIGHT VIA THE NEXXT HOME APP
Пікірлер