🚨 Exciting news, everyone! You can now use the discount code "SUMERAY" to get a smashing 10% off any items you purchase from Evolution's website! This is a special thank you for all the support you've shown. Grab your favorite tools at a great price while you can! 🔧💥
@doddleputz
2 ай бұрын
Brilliant Video. Told me everything I needed to know regarding calibrating my saw. Excellent, and thank you very much.
@sumeraybuilds
2 ай бұрын
Glad it helped
@budaire1
4 ай бұрын
I have this exact saw and haven’t used it for a while, when I did make a cut I thought it was ok but on checking the wood with a square it was way off. But Ive forgotten how to calibrate it. I believe I must of bumped it somehow and knocked the calibration out. This video refreshed my memory on how to calibrate, thank you it was a great help.
@sumeraybuilds
4 ай бұрын
Glad it was useful, thanks! 🙏
@Wellin220365
5 ай бұрын
Excellent video and tutorial 👍👍👍👍 turns out my saw was way out of square etc🤦♂️🤦♂️ Thank you so much for this 👍👍👍👍👍👍👍👍👍
@sumeraybuilds
5 ай бұрын
You're welcome! Glad it helped!
@danielz000
Күн бұрын
Nice video. Aren't the two sides of the fence a solid cast piece of metal though? When i run a straight edge across mine i can see it's slightly V shaped and i assumed that wouldn't be adjustable as i thought it was a single piece.
@dragonfitter
Ай бұрын
Fantastic mine was way out 😂of
@sumeraybuilds
Ай бұрын
Glad this helped!
@DawidhabdArup_N7
6 ай бұрын
Thank you for sharing the calibration with us. I believe *_Our World_* is a *_Shared Experience_* ... I am thinking to get one like this for a while. I got their RAGE -5 Table Saw and the FURY 6 Combo but it get a bit awkward to cut as you can do with this. Anyways, I am waiting to get my workshop (AKA Shed) done as the present one is kinda small for me especially with my wheelchair. These are handy to cut things so easily and safely, so you got the idea. Anyways, Remember *_Life_* is *_Short_* so *_Live Long_* and *_Prosper_* 🖖 Look after yourself and each other & Stay Safe. Cheers!!!
@sumeraybuilds
5 ай бұрын
Thanks 🙏 glad you enjoyed the video
@nathandavis9180
4 ай бұрын
Good Video mate
@sumeraybuilds
4 ай бұрын
Thanks 🙏
@DawidhabdArup_N7
3 ай бұрын
Thank you again for sharing the adjustment process as it is priceless. I got a question about these Mitre Saw. When shopping online, I keep seeing R255SMS DB+ and R255SMS DB-… can you tell me the difference between those two numbers, please? Thank you in Advance…
@sumeraybuilds
2 ай бұрын
So there's a R255SMS and a R255SMS-DB (R255SMS DB+ is the same). Basically the difference is the R255SMS DB allows you to bevel the saws angle boths ways. Instead of just to the right.
@DawidhabdArup_N7
2 ай бұрын
@@sumeraybuilds Much appreciated! I hope I had the opportunity to have a look at your Shed/workshop you made! It sounds like we live not that far as I live in Beccles, Suffolk. Being Disabled, I would like to have a solid ground instead of a wooden floor. I am investing to get one build but I do not think, it will be any close to yours... You take care matey! I shall look forward to watch more videos from you, as many of us do. Look after yourself and each other & Stay Safe. Remember, *_Life_* is *_Short_* , so *_Live Long_* and *_Prosper_* ... 🖖 Cheers...
@tureq85
2 ай бұрын
I recently bought this saw, calibrated as per video (very helpful indeed as mine required a fair bit of adjustment) but noticed that there is a small play at 0 degree positive stop before tightening the orange knob, what do I do?
@sumeraybuilds
2 ай бұрын
I haven't encountered that issue. But in this instance I would suggest contacting Evolution.
@jerseyjim9092
9 ай бұрын
Great tutorial. My saw's table isnt true across the rotating portion and the two fixed sides. It appears that the rotating part is a tad up on the left side. I couldnt find any adjustments for it so I settled on putting 2 layers of duct tape on the left fixed side.
@sumeraybuilds
9 ай бұрын
Glad it helped! 😁
@barnyrockford
5 ай бұрын
Thanks, good tutorial..... BUT!!!!!!.... That was a Torx not a Hex 🙃
@sumeraybuilds
5 ай бұрын
My bad! 😂 thanks 🙏
@alexs5700
9 ай бұрын
Just come across your channel via mark @ start making (woodwork) looking forward to watching your vids
Пікірлер: 26