When you installed the amplifier, where did you get your power from? Did you run all the way up front to the battery or could you explain how you wired it? I have the same exact bike.
@lucgaudette1883
4 жыл бұрын
I am also interested in knowing how the wiring was connected to the original audio system? How tweeters and mid-range speakers were mixed on the same channels? Did you use the amp with HIGH INPUT (4 channels) and then bridge the 4 channels in 2 for the new speakers? By the way, very good configuration, I am jealous because I try to do the same installation, but I have trouble to figure out how to get the audio feed from the original audio system to the amp. Please advise, thank you
@GrooveDJ757
4 жыл бұрын
The amp is just a 2 channel amp. It can go down to 2 ohms and still put out same power. On the original system, the speaker wires were cut and wired to the amp (just 1 pair) The speakers are built with tweeter and woofer. No need to split.
@chekokuhn
2 жыл бұрын
Where did you get your highway foot rest?
@happywill5877
4 жыл бұрын
Hi.. Was wondering if you still have the same system? If so Is it still preforming great? I have been looking and looking for some type of up grade for my spyder no one in my area has any idea on it.
@j-mo-mo
4 жыл бұрын
Nice system! Where did you ground the amp wire to?
@levylawson3854
2 жыл бұрын
How did you get the 6 1/2 to fit
@christyler331
2 жыл бұрын
Hey bro where are you located? I'll pay you to install the same setup on a 2016 f3 limited. Hit me up with a reply please.
@bjammin365
5 жыл бұрын
Nice video how did you modify the speaker housing to fit the 6.5 speakers any information that you can give would be appreciated
@GrooveDJ757
4 жыл бұрын
So, I epoxied the Rockford speaker mounts into the OEM speaker housing. Had to do a little cutting.
@richardbenton3568
2 жыл бұрын
💪💪💪💪💪💪
@Rattlebars
6 жыл бұрын
could you provide more details as to how the amp was hooked up. I think you said CD but might have said CB?
@GrooveDJ757
6 жыл бұрын
The amp is installed in the OEM empty CB space...adjacent to the OEM radio location.
@Rattlebars
6 жыл бұрын
What is the wiring. Did you use the woofer or the mid-range? It appears as if you used the green midrange wires. I have tried the woofer wires and they have no highs, just the bass. Which wires go to the fosgate input. That would help me immensley. Thank you for your time. Take a look at www.rattlebars.com\spyder\spyder.html. I would love to publish the solution with a big shout out to you!
@tonymaile9390
4 жыл бұрын
Did you ever get the wiring solution Rattlebar? I went to the website you listed and I didn’t see anything.
@GrooveDJ757
4 жыл бұрын
@@Rattlebars Im sorry I didn't see this sooner. This may be a bit long. The OEM amp is a 4 channel amp and has a built in crossover for woofer and mid/high. I have completely removed the oem radio signal. So, I have no AM/FM radio. I just use my phone via the Bluetooth. Although the OEM still controls and shows title information on the screen when hooked up to USB.
@tooakki
5 жыл бұрын
Top notch
@DRex45
5 жыл бұрын
Aye bro, putting other stereo systems didn't give you any electrical issues huh
@GrooveDJ757
4 жыл бұрын
None at all!!
@aftershock2000
6 жыл бұрын
where did you find the spyder logo that you replaced the BRP logo with?
@Rattlebars
6 жыл бұрын
There are a number of sources. See this post: www.spyderlovers.com/forums/showthread.php?116384-Does-anyone-know-where-this-replacement-for-BRP-is-from&p=1400884&viewfull=1#post1400884
Пікірлер: 21