My Makita was clockwise to remove... so turning to the right, and then turning to the left to tighten back. Completely backwards from 99.9% of screw-ons I've ever used. It would not have occurred to me before I watched this video. Must be a southern hemisphere version of the tool! Thanks for this video!
@diyforknuckleheads
3 ай бұрын
No worries at all mate 👍👍
@ericmaher4756
2 жыл бұрын
I was just here for the dad jokes, but glad to see a video for absolute beginners, where we all started from. I just wish I could miniaturize myself like you did to put both my hands on that Allan key, there!
@diyforknuckleheads
2 жыл бұрын
Spot on Eric! We all have to start somewhere mate 👍 Thanks for watching 👍😁🇦🇺
@ImRmd2
2 жыл бұрын
I have never seen that locking mechanism on a circular saw. I always used a nail through the blade to keep it from spinning. 😎 Love your videos Uncle Knackahs.
@diyforknuckleheads
2 жыл бұрын
Cheers Dave! It's always good to pick up little tips here and there 👍 Thanks for watching mate 👍😁🇦🇺
@eyesuckle
Жыл бұрын
Thanks for the tip, mate!
@taylorsaquatics
2 ай бұрын
Thank you so much! My husband and I received a saw for our wedding and it came with zero instructions on how to put the blade on. You saved me a ton of hassle.
@diyforknuckleheads
2 ай бұрын
Awesome....glad l could help 👍😁🇦🇺
@56redgreen
Жыл бұрын
This was perfect. Appreciate the advanced warning on the joke, I needed to be prep'ed for that one.
@diyforknuckleheads
Жыл бұрын
😂....Thanks mate 👍
@JesperMakes
2 жыл бұрын
Brilliant! Good tips, I actually have managed to switch a couple of blades on my circular saw, but this overview certainly will save me from some fumbling with the direction of certain things 🙏🙏😁😁
@diyforknuckleheads
2 жыл бұрын
👍😁....Cheers Jesper! 👍😁🇦🇺
@pirakoXX
2 жыл бұрын
I love the dad jokes - and the tips and tricks are okay too! Just kidding! As a newbie woodworker, I've learned SO much here, and also watched a lot of your videos about safety! ❤ KZitem is horrible at letting me know when a new video from my favorite channels (despite bells and everything) is coming out, but I do come here at least once a week to see if there is a new one, or to watch some old ones! KZitem can't fool me! 😁
@diyforknuckleheads
2 жыл бұрын
😂😂....Good stuff Pia! Really appreciate you taking the time to watch. Cheers 😁🇦🇺👍
@colrodrick8784
2 жыл бұрын
me too.
@billmorash3322
2 жыл бұрын
Yep. Those are the reasons I watch as well.
@dosadoodle
2 жыл бұрын
@Pia, for the notification issues, are your app notifications enabled for KZitem? Some mobile operating systems block app notifications by default, so it may be an operating system thing, not a KZitem thing. To enable, you may need to go into the app notification settings in your phone's settings and enable them for the KZitem app. And big +1 to the jokes and content note! Both fun and helpful!
@diyforknuckleheads
2 жыл бұрын
@@dosadoodle Thanks for explain that mate 👍😁
@lechatbotte.
2 жыл бұрын
My saw is a right handed one so it’s lefty tightly and righty loosey lol. I love this it’s like you we watching me cause I just put a new blade on. Label always goes facing out. Good job.
@diyforknuckleheads
2 жыл бұрын
Yeah...spot on mate 👍 Not all saws are at the same 👍😁🇦🇺
@AleksandrFedot
2 жыл бұрын
Спасибо за видео. Безопасность прежде всего-ни один из десяти пальцев не лишний))
@diyforknuckleheads
2 жыл бұрын
Большое спасибо 👍
@sbwyo1966
Жыл бұрын
THANK YOU! I have a Dewalt, newbie DIY guy here, no experience. Couldn't get the $%$# blade installed, as the release wouldn't go all the way down, unable to tighten the blade. Unbelievably frustrating. After 5 different videos, FINALLY, your suggestion to "jiggle" the blade a little was the secret. Immediately it tightened, blade working perfectly. Thank you for explaining things properly for us rookies!
@diyforknuckleheads
Жыл бұрын
No worries at all mate! Glad to help 👍😁🇦🇺
@sbwyo1966
Жыл бұрын
@@diyforknuckleheads It's embarrassing, but I know NOTHING about tools/procedures/etc. and sometimes otherwise great videos will gloss over basics; they just assume "oh, that's too basic to even point out." I appreciate when creators don't skip this kind of thing (even sped up is fine.)
@jacekjaroszek7955
4 ай бұрын
sound and simple - no mambo jumbo /thanks
@diyforknuckleheads
4 ай бұрын
No worries at all mate 👍 Thanks for watching 👍😁🇦🇺
@scottydo2103
2 жыл бұрын
Good saw tip! Love the dad joke....my kids hated it....but that made it JUST that more funny! Cheers, Scotty (Norway)
@diyforknuckleheads
2 жыл бұрын
😂😂....Thanks Scotty 👍😁🇦🇺
@danalaniz7314
2 жыл бұрын
I learn a lot from you and watch your videos even when I know how to do what you are covering. Maybe it is for the added value of the jokes!
@diyforknuckleheads
2 жыл бұрын
Great to see that you still take the time to watch Dan 👍😁🇦🇺
@alexlev4631
2 жыл бұрын
Splendid, old chap! What a joy to watch your tips and tricks! What about double blade fixing? See you, good Merlin!👍
@diyforknuckleheads
2 жыл бұрын
Cheers Alex! Double blade fixing 🤔 Maybe for another day mate 👍😁🇦🇺
@jimaronson2323
2 жыл бұрын
Very detailed step by step instructions. Love the dad jokes!
@diyforknuckleheads
2 жыл бұрын
😂...Thanks Jim 👍😁 Appreciate you taking the time to watch mate 👍😁🇦🇺
@santosrascon4350
5 ай бұрын
Great teacher! Thank You! Bread in captivity, funny!
@diyforknuckleheads
5 ай бұрын
👍😁......Glad you liked the vid mate! 👍😁🇦🇺
@markarnold159
2 жыл бұрын
Good show Unk!!!!!
@diyforknuckleheads
2 жыл бұрын
👍😁...Cheers Mark! Thanks for watching mate 👍😁🇦🇺
@matthewanderson6254
2 жыл бұрын
Fair but strong work knackas. You've done well mate....
@diyforknuckleheads
2 жыл бұрын
Cheers mate! Thanks for watching 👍😁🇦🇺
@PARDS2
6 ай бұрын
SUPERB !!!!
@diyforknuckleheads
6 ай бұрын
👍😁.....Thanks mate!
@raulsquad5561
Жыл бұрын
You are a legend! Thank you for existing ☮️💟
@diyforknuckleheads
Жыл бұрын
You are so welcome Raul! Glad you found the video useful mate 👍😁🇦🇺
@wanderingranger4208
2 жыл бұрын
Nice video, I can understand now why they make the saw nut so you can use a spanner too, you forgot to put the Allen key back lol All the best and already looking forward to your next video.
@diyforknuckleheads
2 жыл бұрын
Cheers mate 😁🇦🇺👍
@shaneelson
2 жыл бұрын
What! 😳 You have to change the blade! I usually wait till all those rough bits are worn off then buy a new saw 🤣🤣🤣 Great tip Knackers 👍 This'll save me some $$
@diyforknuckleheads
2 жыл бұрын
😂…man after my own heart Shane 👍😆 Thanks for watching mate 👍
@shaneelson
2 жыл бұрын
@@diyforknuckleheads For cutting roofing iron, if you have an old non carbide tipped blade, reverse it (so the back of the tooth hits the tin first). Good use for an old, dull blade and makes cutting big runs easy peasy (wearing proper PPE of course).
@kentshrader6616
9 ай бұрын
Thanks for your timely video!! No wonder I couldn't get the stupid bolt to turn!! I was going in the WRONG direction!!🤪
@diyforknuckleheads
9 ай бұрын
🤣.....Trust me Kent, you're not the only one to ever have done that 👍 Thanks for watching mate 👍😁🇦🇺
@colrodrick8784
2 жыл бұрын
Bread in captivity. Ah knackers, as the kids would say (and have said) Rodrick humour. The same as Dad jokes only no parent required. Gotta love that rain. 110mm in the rain gaugey thingo over the past two days. Lovely wifey emptied the rain water tank 2 days ago. 5000 litre tank. When we got up yesterday tank was overflowing from the outlet. There was so much rain coming down the overflow was not working - it was actually going out the inlet instead. Hard to believe. Back inside watching videos because cleaning up garage and doing little bits of organising around the garden shed I embarked on clean up garage not touched since when I was still surfing every day. Lots of dirt grime gunk amd rodent poo. Not hygienically clean. No gloves because I'm tough. Not tough enough: like Mrs Marsh they do get in (my finger) swollen like a balloon. Double strength antibiotics and just waiting to get back into it. Thanks for the video. I would have loved this info a few years ago. But also useful reminders to stay safe mate.
@diyforknuckleheads
2 жыл бұрын
110mm....nice drop indeed mate 👍 Where we are it's getting a little out of hand however. Hasn't stopped for weeks....looking forward to the sun coming out so the backyard dries up a little. 😂....bullet proof we are not mate...been there done that 😬 Hope you're having a great weekend and thanks for watching 😁🇦🇺👍
@colrodrick8784
2 жыл бұрын
@@diyforknuckleheads Just at Coffs atm (and who knows? forever, until we go home to Lennox..). Got another 40mm here yesterday and that was actually under 24 hours. Been kinda binge watching your videos seeing the time lapse as you (and I) grew older. hurrumph.. more mature, except the jokes which anchor us at about 8.
@diyforknuckleheads
2 жыл бұрын
@@colrodrick8784 Hahahahha....8's about right 🤔😂 Just down the road here in Sawtell it rained all night....it has to stop some time....l think 🤔 I was actually up your way on Wednesday night doing a social media workshop in Maclean 👍
@colrodrick8784
2 жыл бұрын
@@diyforknuckleheads It's actually stopped now. Wifey says no sneaking out to the garage though. Doctor wants me to leave the thumb alone. I need to listen to her because I married her baby sister. But... I took a trip down memory lane (of your projects I need to replicate) earlier. The fishing rod holder. Came across a stack of beach rods stored way up high in the garage. I had to move them out because I set up a very high stack of el cheapo shelves to store all the extra junk we now have here. I will have to store the rods somewhere, perhaps outside against the outer wall of the (corro) garage. Will be easily accessible to carry for fishing trips to Moonee Creek (Just down the road) and neat. And cheap. My almost favourite word. Will also be safe; this is a bit of a dog haven. So, I have that project to move on to when I am back into it. Ta Shane.
@dosadoodle
2 жыл бұрын
We need a compilation video of all the dad jokes!
@diyforknuckleheads
2 жыл бұрын
😂......l might just do that mate 👍😁🇦🇺
@andymiller5611
2 жыл бұрын
Excellent content as always, mate! Keep it up! 👍
@diyforknuckleheads
2 жыл бұрын
Cheers as always Andy! Appreciate the feedback mate 👍😁🇦🇺
@jamesguinan
2 жыл бұрын
Again. TOP CLASS!!!!!!! EL CLASSICO. James in Dublin 🎯
@diyforknuckleheads
2 жыл бұрын
👍😁…Cheers James 👍👍 Hope all’s well over there in Dublin mate! 👍😁🇦🇺🇦🇺
@morriskuria6595
2 жыл бұрын
Great tips👏thanks.
@diyforknuckleheads
2 жыл бұрын
You are so welcome Morris! Thanks fr watching mate 👍😁🇦🇺
@CheaddakerT.Snodgrass
2 жыл бұрын
The Circular Drive sign would have been good here.
@diyforknuckleheads
2 жыл бұрын
👍😁
@theozographakis5234
2 жыл бұрын
Another great vid Uncle. Great content for new starters. Luvin’ the dad jokes mate. Keep ‘em coming.
@diyforknuckleheads
2 жыл бұрын
My pleasure Theo! Thanks for taking the time to watch mate 👍😁🇦🇺
@jamesguinan
2 жыл бұрын
Bread in Captivity 🤣
@diyforknuckleheads
2 жыл бұрын
🤣🤣
@diyforknuckleheads
2 жыл бұрын
🤣🤣
@diyforknuckleheads
2 жыл бұрын
😂😂
@SuperMegawoman
7 ай бұрын
Thank you, just thank you!!
@diyforknuckleheads
7 ай бұрын
You are so welcome! Thanks for the feedback 👍😁🇦🇺
@paulmaryon9088
2 жыл бұрын
Hey uncle, thought for mo your mini course was all about how to drive a Mini !! Great vid as always, thanks mate, stay safe and keep out of trouble.
@diyforknuckleheads
2 жыл бұрын
😂😂....Thanks Paul👍 Appreciate you taking the time to watch mate 😁🇦🇺👍
@ianbahn7193
2 жыл бұрын
Just picked up on your channel. FECKING love it!
@diyforknuckleheads
2 жыл бұрын
Awesome! Thank you Ian! Welcome aboard 👍😁🇦🇺
@haydencardow6500
2 жыл бұрын
i love the sign in the back of the intro, tool rules, dont touch, dont move, dont borrow dont even look
@diyforknuckleheads
2 жыл бұрын
😂😂… Yeah l love it too Hayden. Thanks for watching mate 👍😁🇦🇺
@haydencardow6500
2 жыл бұрын
@@diyforknuckleheads love the content mate, also do you have any recommendations on where to buy power tools around Coffs? I'm starting up my own woodwork shop at home
@NobbyRon
Жыл бұрын
Great video’s mate, very informativ, with a small touch of humor, big thumbs up from Holland👍👍
@diyforknuckleheads
Жыл бұрын
😁.....Very much appreciated Ron.....glad you found the vid useful and thanks for taking the time to watch mate 😁🇦🇺👍
@natarajansugumar5671
2 жыл бұрын
Exactly said well.Frequently I confused.So I marked the direction on the safety guard by marker pen on my Black and Decker Circular Saw. N.Sugumar,(Retd.Deputy Registrar) Tirunelveli, Tamilnadu, INDIA.
@diyforknuckleheads
2 жыл бұрын
👍👍
@chilupame1993
Жыл бұрын
Nice explanation, looking forward for more upcoming videos
@diyforknuckleheads
Жыл бұрын
Thanks Chilu! Appreciate you taking the time to watch mate 👍😁🇦🇺
@crazybillshobbiesandstuffd7652
6 ай бұрын
Good joke. I liked it
@diyforknuckleheads
6 ай бұрын
😂......Thanks mate 👍
@sumosprojects
2 жыл бұрын
Mate you ain’t making any dough with that dad joke 😮🧐 anyhow wishing you much success with the course 🇦🇺🍻👍
@diyforknuckleheads
2 жыл бұрын
😂....Touche mate 😂 Thanks for watching big fella 👍😁🇦🇺
@pteddie6965
2 жыл бұрын
You are one smart 'Byron Bay Cookie', mate. (Don't I sound extremely Australian?) Bread in captivity......I love it!! How could anyone turn down a chance to be instructed by Professor Knackers??? I'm looking forward to earning my CSD (circular saw degree)!
@diyforknuckleheads
2 жыл бұрын
😂....P.t you're as Aussie as Crocodile Dundee 😁 CSD!...That's genius...lf you don't mind l may just use that 🤔 Thanks for watching as per usual mate 👍😁🇦🇺
@pteddie6965
2 жыл бұрын
@@diyforknuckleheads Of course, Uncle Knackers! That does put me in the lead for giving the Valedictorian Speech at the graduation ceremonies, doesn't it?? Now, I've got to see if Amazon has any of those HUGE knives that Mr. Dundee had strapped to his side!!
@diyforknuckleheads
2 жыл бұрын
@@pteddie6965 Hahahahahaha....cheers mate and watch your fingers....those knives are sharp! 👍😁🇦🇺
@rebeccaboyette866
2 жыл бұрын
Bread in captivity....that's rich....Love the dad jokes!!
@diyforknuckleheads
2 жыл бұрын
😂😂...Thanks Rebecca! Glad you liked it 😁🇦🇺👍
@barryroberts6470
2 жыл бұрын
Help Me Please????? i actually had a smirk and a smile on my face after hearing that Dad joke, Twice, i rewind to the joke so my wife could hear it and i smirked and smiled again and my wife just shook her head, mind you i shook my head as well, so that means the smirking and smiling must have been wind, yep that's what it was a bit of wind ha ha ha. Stay Safe My Friend, Barry (ENG)
@diyforknuckleheads
2 жыл бұрын
Wind...😂😂 Good stuff Bazz.....l think the wife secretly liked it mate 😁 Hope you're well mate 👍😁🇦🇺
@sethc6663
2 жыл бұрын
My dad ''Have you been using the circular saw?'' Me ''No dad, why what's wrong with it?'' Dad ''Well it's not cutting the wood any longer......it's only cutting it shorter'' 🤣🤣🤣 Me 🤦♂️🙄
@diyforknuckleheads
2 жыл бұрын
Hahahahhaha...Touche Seth 😂
@ianarmstrong5858
2 жыл бұрын
Great tips as usual Shane, I think the Dad joke could just be the best yet!!🤣🇬🇧
@diyforknuckleheads
2 жыл бұрын
Hahahahha....Cheers Ian 🇦🇺👍😁
@kantemirovskaya1lightninga30
2 жыл бұрын
love that joke-took me a bit lol
@diyforknuckleheads
2 жыл бұрын
😂😂😂...Cheers 👍😁🇦🇺
@bhellelahaylahay6974
2 жыл бұрын
Dream tools someday someday i use grinder to cut plywood to make cabinet hahahha very dangerous makita very expensive tools
@paraman7
2 жыл бұрын
brilliant vids, thank you, do you have any vids on selecting and using Bandsaws
@diyforknuckleheads
2 жыл бұрын
Thanks mate but unfortunately l don't have one on the bandsaw 👍
@hondaaccord3491
2 жыл бұрын
Dws780 miter saw ..donde la comprastes..y cuanto te costo.?
@markshaneh
2 жыл бұрын
Mate I need to learn how to cut and measure external and internal mitre cuts with aluminium angle , starting at 10x10, I also need to understand the measurements between internal and external , can you point me in the right direction 👍
@FixitFingers
2 жыл бұрын
I hope there are tips on using a circular saw to cut extra crusty french rolls...
@diyforknuckleheads
2 жыл бұрын
😂....of course James 👍🇦🇺😁
@konulaslan
2 жыл бұрын
*16-cı bəyənmə məndən.* 👍👍👍 26.03.2022, 12:12
@jurgenbergman6887
2 жыл бұрын
LMAO... Your joke´s kills it :)
@diyforknuckleheads
2 жыл бұрын
🤣… Cheers Jurgen 👍😁🇦🇺
@mickcawley4797
2 жыл бұрын
Got a bit of a bargain lately, Shane. A used Makita 7" 18v circular for £30 (53 Australian dollars). It was an old ni-cad saw but I have a couple of converters for Li-on batteries that I use on some drills. It's really light compered to my other 10" cornered circular and I wouldn't be without it. Oh and by the way ,Klopp. Thanks for stuffing Chelsea's season in the FA Cup and league cup🤣🤣🤣 Look forward to the next video.🏴🇦🇺
@diyforknuckleheads
2 жыл бұрын
👍👍...Absolute bargain Mick! Well done mate and yes, how good are the mighty Reds!....What a nail biter....l couldn't watch...to nerve racking. Have good one mate 👍😁🇦🇺
@RPmusic06
2 жыл бұрын
loved the video unc!! i also clean my saw blades with a wire brush to get even more life out of one blade and cleaner cuts, its very handy because i use my circular saw also as an tracksaw (kinda) i always love the dad jokes unc😂 and i can't wait for the mini course!!! have a great weekend unc!🍻
@diyforknuckleheads
2 жыл бұрын
Cheers Rushill! Great tip re cleaning the blades 👍👍 As always, appreciate the feedback mate and l hope you're having a great weekend 👍😁🇦🇺
@RPmusic06
2 жыл бұрын
@@diyforknuckleheads thanks unc, you too!!🍻🍻
@terrywn46
2 жыл бұрын
Rather than a shifter if the Allen Key is not available, I would find a socket that fits and use that. (Hopefully not a 10mm one tho' Lost all of mine along with flat blade screwdrivers :-) )
@diyforknuckleheads
2 жыл бұрын
Hahahahaha...the elusive 10mm socket 😂
@nathancloke8970
2 жыл бұрын
Worked with a carpenter for a while and he somehow put a magnet on his locking button so you didn't have to keep pressing it down, it wasn't perfect but this was years ago and with the ready availability of rare earth magnets, I'm sure someone out there can perfect it
@diyforknuckleheads
2 жыл бұрын
Interesting 🤔
@M.Georgiev8527
3 ай бұрын
My dad used to Lefty loosy, righty tighty...
@diyforknuckleheads
3 ай бұрын
👍👍
@perpetualgrimace
2 жыл бұрын
I know full well how to do this, I'm just here for the dad joke 😂
@diyforknuckleheads
2 жыл бұрын
😂...Good stuff James 👍🇦🇺😁
@warrenroberts9386
2 жыл бұрын
Knackeerrrrsss!!! Loving the channel mate. Could you advise me on a project please. We have a large 3 and 4 seater sofa. One of them has developed a small bow in the middle. I’m thinking of taking all the legs off and building a wooden base to attach to the underside of the lounge, which is rebated to attach a front mould or trim. Is this as simple as building a base from construction pine and allowing enough rebate to fit the trim. Any tips or advice would be sensational mate. Waz
@diyforknuckleheads
2 жыл бұрын
Cheers Wazza 👍 Mate it sounds like you're all over it 👍 Pretty hard to give advise if l don't actually see it but from what you've said it sounds like a plan. Good luck with it mate 😁🇦🇺
@krickette5569
2 жыл бұрын
Hoping everything is alright with you!
@diyforknuckleheads
2 жыл бұрын
Hi Krickette... all is good thanks or asking. Just been busy working on a Circular Saw Online Masterclass...almost finished 🤞 Should be back uploading to KZitem shortly. Cheers 👍😁🇦🇺
@Mauricio_Ferrari
Жыл бұрын
Hey uncleknuckle thanks for the video. I have a Ryobi R18CSP that I bought in 2021 here in New Zealand without knowing much (came with a set of 9 tools) included an 18T blade. After another video of you I learned about the amount of teeth so I went to Bunnings and bought a 40T blade but the wrong size (165mm, knuchleahead). So I'm checking and seems only Ozito brand is available with 36T at Bunnings within the 150mm size. I've checked other retailers and none of them have that size. Could you please share any advice? thank you in advance.
@diyforknuckleheads
Жыл бұрын
G'day Mauricio.....try this one from Makita www.totaltools.com.au/157920-makita-150mm-25t-tct-circular-saw-blade-for-wood-cutting-efficut-e06915 I know it's not 40T but it will still give you a very nice cut. From memory, l have never seen a 150mm saw that comes with a 40T Blade. I'ver seen ones with 50 but they are for cutting metal. Good luck 👍
@Mauricio_Ferrari
Жыл бұрын
@@diyforknuckleheads thank you!.
@BenHollist
2 жыл бұрын
😁😁Your Dad jokes are getting as Lurch would say .... AAAAAAHHHHHHHHHH (incert deep moanfull tone here ) lolololol Goo to see the series moving forward mate :)
@diyforknuckleheads
2 жыл бұрын
😂😂.....Cheers mate 👍😁🇦🇺
@paulmills3315
Жыл бұрын
Hi does food need
@aquatarkus2022
2 жыл бұрын
I have to use a screwdriver stuck between the teeth to lock the blade. I guess I need a new saw. 🤔
@diyforknuckleheads
2 жыл бұрын
Mmnnn...not ideal A.T. 😂
@paulrusso3829
2 жыл бұрын
When’s the next build, Uncle?
@diyforknuckleheads
2 жыл бұрын
Should have one coming up soon Paul 👍
@MorinWolff
2 жыл бұрын
are you the coach of liverpool fc?
@diyforknuckleheads
2 жыл бұрын
😂😂....That's my part time gig when things are slow in the workshop 😂.....Go the Reds!!
@patterdalezipsuzilil
4 ай бұрын
Ha I clamp mine in vice
@ccarmelo1979
Жыл бұрын
I was a little worried about installing the blade after reading a couple of reviews. But it was amazingly easy. Took about 1 minute. Works great kzitem.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . Cuts easily and is perfect for pocket cuts I needed to make for replacing some old deck boards.
@killer-kane
2 жыл бұрын
I would argue that if you don't already know this stuff then you shouldn't own a circular saw. I'm typing this with the last two fingers I have on my right hand. Only joking.
@hbryan614
2 жыл бұрын
No room for beginners then, eh ?
@ellenbeard6096
Жыл бұрын
funny
@barney992
2 жыл бұрын
another ripper video but you were loafing around when thought of the Dad joke .
@diyforknuckleheads
2 жыл бұрын
Hahahahha....touche Barney 😂 Thanks for watching mate 😁👍🇦🇺
@code-fox
2 жыл бұрын
Thumbs up for the dad joke!
@diyforknuckleheads
2 жыл бұрын
😂....Glad you liked it mate! 👍😁🇦🇺
@Dirtyharry70585
2 жыл бұрын
Mmmmm I guess reading the manual is out of the question.
@hbryan614
2 жыл бұрын
Not if you get a hand me down or 2nd hand tool.
@diyforknuckleheads
2 жыл бұрын
G'day D.H. A lot of people actually like watching a tutorial rather than reading....juat sayin'
@diyforknuckleheads
2 жыл бұрын
Very true mate 👍
@David_P132
2 жыл бұрын
Actually I quite liked the Dad joke this time.
@diyforknuckleheads
2 жыл бұрын
👍😁...Glad you liked it David 👍😁🇦🇺
@J.James-Bowkey2830
2 ай бұрын
My saw doesn't have a blade lock
@diyforknuckleheads
2 ай бұрын
Mate, look up your user manual on google and find out where the blade lock is. All saws have one as you need to be able to lock the blade to change and replace it. Good luck 🤞
@djmini2numpty141
2 жыл бұрын
sorry, enjoy pretty much all your vids, but owners manual supplied with each tool should be enough for even the basic knucklehead... look fwd to more advance tips and projects
@diyforknuckleheads
2 жыл бұрын
No worries DJ…we all have to start somewhere mate 👍👍
@hbryan614
2 жыл бұрын
A hand me down or 2nd hand tool doesn't always have a manual.
@bradpittbutcooler5462
2 жыл бұрын
Where is new video unkle knackles?
@diyforknuckleheads
2 жыл бұрын
Just working on my online course at the moment mate which is taking up all my time but a new vid should be out soon...stay tuned 👍😁🇦🇺
@humantiger72
2 жыл бұрын
I only watch for the dad jokes
@diyforknuckleheads
2 жыл бұрын
😂..Cheers mate 🇦🇺👍😁
@Davidevans44
5 ай бұрын
excellent totally idiot proof video. All vids should be made assuming that your old granny is trying to follow...that would cover most of the rest of us🙂
@diyforknuckleheads
5 ай бұрын
👍😁......Thanks David! Appreciate the comment mate 😁🇦🇺👍
Пікірлер: 173