makes it look so easy. ive had horror stories on my knees on the floor of my garage
@XuroX.
4 жыл бұрын
Me too....
@joeytra4007
4 жыл бұрын
Me too in about 5 mins
@ethanlancaster76
3 жыл бұрын
Yah I’m in this category myself 🤦♂️
@ClaytonSensiba
7 жыл бұрын
Wow that's sweet you got jay Clarke on your channel!
@Motonion
7 жыл бұрын
He managed to do that super easy :)
@DirtBikeChannel
7 жыл бұрын
Yes, Jay is a great guy.
@kenneychappuis1853
7 жыл бұрын
I hate people that can change tires that easy
@Shoorit
3 жыл бұрын
I can do it that quick but there will be like 10 holes in the tube.
@mrmjg20
3 жыл бұрын
Yeah, this guy is good.
@jakobholmgren1029
2 жыл бұрын
It really ain't that difficult. If it is hard to change tyres one does it the wrong way OR have old tyres. An other thing to note is that powder does more or less nothing to prevent pinchflats. Use mousse grease insted. If you think avout it like this you will understand why. With two fingers, pinch the tube. Does it "slide" away from your fingers? Most often NO. Now with mousse grease, do the same thing. Does the tube "slide" away? YES. If it is easy for you to pinch the tube it is as easy for a rock. If it is hard for you to pinch the tube it is hard for a rock aswell.
@graysonsoileau4891
2 жыл бұрын
Thank you so much for making this! I was struggling from a bad video. After watching this, had my tire on in 20 minutes. Now time to do the front.
@ClayFick
7 жыл бұрын
Man those shelves in the back w the tires on them are awesome!
@DirtBikeChannel
7 жыл бұрын
My dad made those for me for Christmas last year.
@philgoogle1535
2 жыл бұрын
Thanks guys very much for this. I've struggled for hours in the past and just now, I've changed a stiff 18" Motoz Rallz, whilst following your video, in an hour. 👍👍👍
@Shecki603
7 жыл бұрын
Love seeing you and Jay Clark teaming up for some videos. I think with the two of you working together....could create a pretty awesome channel.
@jamiescarr3127
Жыл бұрын
I was struggling so bad so I watched this. Man so many little hints to make the tire change easier! Thank you. Got it done no worries afterwards. Now to go buy new tires. And tubes as the stems are rusty. Thanks again for great content. From Australia.
@Shoorit
3 жыл бұрын
Everyone remembers their first attempt at changing a tire. “It looks easy, can’t be that hard” 2 hours later, sweating and it’s done.. only problem is it doesn’t hold air 🤦
@lukefish7562
3 жыл бұрын
Great, 😆 about to do mine for the first time. 🙏🏽
@king49334
2 жыл бұрын
pinch the tube.
@Shoorit
2 жыл бұрын
@@king49334 more than once.
@elnogo9196
2 жыл бұрын
that only happened after I changed it about 5 times. it's discouraging..
@ahmedbaklka3324
2 жыл бұрын
Thank you so much, I really managed to change my second tube successfully right after watching your video, can’t thank you enough! Keep up the great content!
@VFRCapBob
2 жыл бұрын
Jay's method works great. I watch one of his vids before I change tires everytime. Keeps getting easier too.
@stankrieger3598
2 жыл бұрын
Best video, I have seen yet. On my way to the shop to make me a tire stand. Thank you
@madness9614
7 жыл бұрын
love your content, keep up the great work. cheers from Australia
@Kneetopia
4 жыл бұрын
An important learning point for those that live in colder areas. Get the tire warm before putting it on or off. Ruined one tire by not realizing that. Also kicks your ass
@dannuthals7045
4 жыл бұрын
Jay is the man!
@davea9502
Жыл бұрын
Thanks for the super helpful tutorial!
@ouraccount5258
7 жыл бұрын
Good information saved for next tire change
@otpipe
7 жыл бұрын
As with anything the pros make it look so easy. Good video and helpful tips.
@kevin_nagle
4 жыл бұрын
PRO TIP: Those last two bites; instead of removing the tire spoon, take the bite then slide the spoon over for the last bite. That way instead of “not scratching the wheel too badly.”, you won’t scratch the wheel at all :)
@SkinnySkinch
6 жыл бұрын
awesome video Kyle so cool to get JC in there. I literally hated changing tires so much for so many years that is literally the reason I tried TUBliss. Now that ive ridden on tubliss I will never go back to tubes but holy crap tire changes are infinitely easier with tubliss than a tube'd tire.
@keystonerider1308
7 жыл бұрын
Awesome video man. Just bought a new rear tire and gonna give it a go myself this time around! Love the videos keep up the good work buddy!
@richardpanek9705
7 жыл бұрын
great video very informative I just mounted a 19" rear and followed the steps pausing it as I went along went much easier under a half hour thanks for making great videos .
@mike345233
6 жыл бұрын
Thanks Kyle, this helped me today!
@eriknash8783
Жыл бұрын
Awesome. Makes it look so easy. Would have been interesting to include you doing the front tire change while Jay supervised.
@johannesyla-outinen574
7 жыл бұрын
Thanks for the awesome video!! I would have needed this more a year ago but this still gave me some good tips.
@Bobsteroid
3 жыл бұрын
Thanks again, Jay! But I'm curious what alternate lube can be used in a pinch?
@nathanmiller9545
4 жыл бұрын
Practice and technique makes perfect I pinched around 6 tires before I got it right a little different to this technique tho but it’s a lot easier for me 2 tire changes in a row doesn’t take me that Long either simple once you do it a few times and use the right amount of tools I don’t have anything to put my wheel on I just put it in a work top
@elnogo9196
2 жыл бұрын
easy peasy, show us an Enduro tire change. the stiffness of the dual sport tire makes technique even more important. a little bird told me so
@AdvBrewery
4 жыл бұрын
Beautiful video, thanks Kyle!
@colinchilds
3 жыл бұрын
Just keep rewatching the video. I’ve changed 85 tires. Got the rear tire off the yz450f but cannot get it started back on. I’ll give an update if I ever do or not
@muddytrails1666
7 жыл бұрын
Stellar demonstration!
@northernlightse3066
4 жыл бұрын
Awesome. Love that guy Jay
@crjmoto
7 жыл бұрын
I have a feeling I'll be coming back to this vid next tire change. Thnx for sharing
@DirtBikeChannel
7 жыл бұрын
You are welcome.
@PetterIvarsson
7 жыл бұрын
Really great video about tire change!
@robertglenn4670
7 жыл бұрын
Thanks for the great video! It really helped me out.
@OnOffmoto
7 жыл бұрын
wow! i'm italian and I never see this way to change a tyre, I will try the next time to do that! I love to try new ways to change tyre. So I hope the next video will be how to change a front tyre with new mousse and new tyre! I think is very hard to put in to me!
@72codeman
7 жыл бұрын
Super jealous of that tire stand. I need to get some of that tire paste
@DirtBikeChannel
7 жыл бұрын
Same.
@tonyallison3786
5 жыл бұрын
Lol imo someone who rides mostly track that tire looked pretty fresh to be changed out 😂
@southbrooklynmoto9184
6 жыл бұрын
You are the tire master.
@StratonStrangler13927
4 жыл бұрын
Thanks! I was actually able to do it! But if you don’t have one of those nice wheel holders an extra pair of hands and a solid surface is needed! Haha
@madman432000
7 жыл бұрын
I like to use 2 rim locks, usually add one on opposite side of rim from the original. Helps balance on the KTM. Any easy tricks for installing with 2 rimlocks? These pro guys always make it look easy.
@mrkattm
5 жыл бұрын
You don't need a stand but you do need some sort of lube, dish soap, Windex or some sort of bead/tire grease. This along with keeping the opposite side of the tire in the rim well is the key to fast tire changes.
@solarxsniper269
7 жыл бұрын
Can you tell me how to tell if a tire is worn down? So I know when its time to change mine im on a 2016 KTM 85 Right Now...
@janssendoemel5560
7 жыл бұрын
Solar XSniper when you feel there is little to no grip and the knobbies will be almost gone
@solarxsniper269
7 жыл бұрын
thank you
@MrVinylJunkie
6 жыл бұрын
Jay Clarke ,,,,,,,,, What A Legend, Thank You !!!!!! :-)
@joey011582
2 жыл бұрын
The tire shouldn't spin and put pressure on that valve stem if the wheel lock is in place correct? I've always had my valve stem nut tight and never had a problem and I'd run 8-10 psi.
@FishWithWyoming
Жыл бұрын
Hunters engineering is the best I was a tire tech/gs lube. And we use all hunters equipment and liquids.
@jamespolucha6911
3 жыл бұрын
What do you think of splitting the old tube and putting it around the new tube for extra protection ?
@sam-ww1wk
2 жыл бұрын
Warning, if you use this removal method on a tight bead/rim interface, your rim will be stuck between both beads and you'll hav to painfully reverse. This only works with loose tires.
@dagsterblaster4973
3 жыл бұрын
How to change a dirt bike tire: "Yes, I'm bringing a tire and rim to you tomorrow, how much and when can I have it back? $40? Deal." I did once change a rear tire, after 2 days, 8 hours, bruises I crossed that off my life manly bucket list and vowed to NEVER do again. I'm good to my word.
@Samson_Adams
6 жыл бұрын
Doesnt the yellow dot have to be right on the valve stem
@Sharkaru02
3 жыл бұрын
That's the light spot on the tire. It should be lined up with the heavy spot on the wheel for the best balance. The heavy spot on a wheel with a rim lock is at the rim lock. If the wheel doesn't have a rim lock, you should line it up with the valve stem.
@brian103181
4 жыл бұрын
Great Video!
@infidelmat
7 жыл бұрын
I thought you ran Tubliss? 5 psi tubliss with an AT81RC in your area would be like a trials tire with dessert tire toughness. In the first half of its life, the RC version can be run flat without any huge disadvantage if you puncture.
@muddpuppie226
7 жыл бұрын
great video
@zegast
7 жыл бұрын
i really liked this episode :D cheers
@brianh8484
7 жыл бұрын
Thoughts on greasing the tube? I've seen several top/pro riders on KZitem (Adam Reimann comes to mind) who grease up the tube which in theory makes the tube slippery inside the tire and avoids pinch flats. I like the idea but certainly messy.
@72codeman
7 жыл бұрын
I could never find rubber safe grease, must be a more common thing in Australia where he is
@calvingaudette
2 жыл бұрын
Did my valve stem nut tightened to cap like in video and valve stem ripped during an enduro causing a flat. Idk if this is a fluke or just bad advice.
@joey011582
2 жыл бұрын
Rim lock on installed properly?
@TK-cl1jm
3 жыл бұрын
Where do you start if you're not running rim locks? Opposite side from valve stem?
@Aux1Dub
2 жыл бұрын
Thanks
@Wide000
7 жыл бұрын
Excellent!
@bryanroberts
7 жыл бұрын
I've changed alot of tires in my time but that dude made me look like a newb! lol... Nice how to vid Kyle!
@DirtBikeChannel
7 жыл бұрын
Yes, he is the man with tire changes!
@darrinlaing1174
2 жыл бұрын
I have replaced a tube twice in a couple months on a Ktm 250 sxf (rear) same damage to the bottom of the valve stem where it meets the tube. The wheel has a rim lock . Also The valve stem came with 2 nuts on it and I left one on the inside of the rim. Any ideas why it keeps bursting the tube below the valve stem? Last puncture caused me to crash of a jump landing so I’m keen to get rid of this issue..
@2burning2turning
7 жыл бұрын
Awesome video, I would like to see how to change a tyre with the tubliss design. Thanks
@jsnyper4357
4 жыл бұрын
It took me 4 hours to replace a the front on my AT today. :(
@bikermike
6 жыл бұрын
great! but lacked the more difficult part of breaking the bead!
@Drigo103
3 жыл бұрын
Front Tire took me damn near 2 hours, I was mad frustrated.... knees, knuckles hurting exhausted HAHA! My rear was staring at me the whole time laughing :(, took the high road and walked away. was gonna throw him to my neighbors yard ( though about the money that would've cost me :) Asia I hadn't spent enough on this restore..
@carlosdias1940
6 жыл бұрын
Inserting a mousse next time? Thank you for your insights!
@KefirTView
3 жыл бұрын
To all novices, DO NOT attempt to change your own tires. Definitely take it to a shop. You will end up butchering your new tire bead trying to get the last 1/3 of the new tire on, especially on the rear, plus you'll have a small battle getting the tire over the rim lock correctly. These guys in the videos make it look easy just to push product. You'll notice them always pushing either a bead buddy or tire irons and everything else. In the end, you'll be left with rims you badly scuffed up and a trip the local tire shop anyway. Learn to dismount your rims from your dirtbike and drive them over to the shop.
@maikelnait4495
2 жыл бұрын
one of the best things in life is learning new things. Some do some don’t. Either way is ok.
@KefirTView
2 жыл бұрын
@@maikelnait4495 I agree in that learning new things is what I live for. Having said that, there's a learning curve for a lot of these newly learned tasks and there's a HUGE market out there pushing every stupid tool under the sun to get you to open your wallet. This specific task has a very expensive learning curve and should not be attempted unless you have money to blow on trial and error.
@maikelnait4495
2 жыл бұрын
@@KefirTView Yeah, I know. I can build that stand, tire irons don’t cost that much, that paste I can replace with dish soap. The rest is just being present/aware and common sense. Of course i have pinched some tubes when i was younger but fixing them was also interesting. I mean one can give up right away or... I speak for myself of course.
@joey011582
2 жыл бұрын
I've never had an issue replacing tires
@scotcook5
4 жыл бұрын
Do you think rim/wheel locks are a must on a 250 dual sport? I don't air down like you, rarely would run under 20psi. Thanks for your reply
@thepoorprince3494
4 жыл бұрын
Should we keep the one nut & washer in tube?
@JimEckert
7 жыл бұрын
Nice cameo SJC
@DirtBikeChannel
7 жыл бұрын
You saw him there eh?
@sqlb3rn
3 жыл бұрын
Got my ass kicked trying to fix a flat tire. Rubber was waaay to stiff to get it off the rim. Had to take it to the stealership and asked them to do an oil change while they had it... $180 and a week later, never going to the stealership again for a flat tire or oil change.
@pentecost66
7 жыл бұрын
How about a tire stand review?
@drdrft
7 жыл бұрын
yep... I see heaps off people doing co-labs of late... Jay does make it look easy but than again he was a factory racing mechanic...lol
@garyeckman5888
7 жыл бұрын
Good info, would be good to see a pro mount a tire with a Tubliss system.
@thomasgreen8532
5 жыл бұрын
Yes that would be cool to see s pro change a Tire on a tubliss
@davidbicking2626
6 жыл бұрын
Should the rim strip go on top of or under the rim lock
@eason9115
5 жыл бұрын
Where do you find that tire paste I've checked walmart and the auto parts store no one knows what I'm talking about?
@aaronhayes3gun
6 жыл бұрын
Great video, what stand was he using?
@bigyamaha2907
7 жыл бұрын
I've changed hundreds of dirt bike tires and never thought to go back around and knock the Beed off and I always have a hard time with that last little piece especially where my tires or 19 inch
@DirtBikeChannel
7 жыл бұрын
Yeah, this tip will help for sure.
@michaelclark5796
2 жыл бұрын
What do shops charge? Seems like a pita to diy
@nesnegrey
3 жыл бұрын
I didn't understand what he meant about the nut on the valve stem?
@sethjacobsen9089
3 жыл бұрын
What tire changing stand is he using ?
@WarbirdPylonRacer
5 жыл бұрын
Do you do it any differently if it is a tubeless tire?
@94SexyStang
2 жыл бұрын
MUCH harder than it looks!.....because it's Technique and muscle memory.....you gotta do a few tires and then it's Easy.
@bmark1831
7 жыл бұрын
Rim strips or tape. What is better?
@NicolasPoirier
6 жыл бұрын
I'm curious, it kind of looks like he has a little bit of air in the tube when he's installing the new tire... Is that correct? And if so does having a little bit of air in the tube make it less likely that you're going to pinch the tube with the tire lever?
@andrewsmith2948
5 жыл бұрын
At 5:54 he adds air
@billb295
7 жыл бұрын
I like the tire paste, gunna get some. Windex dries to fast!
@rodneyjohnston2217
5 жыл бұрын
I need the little tire stand roller deal
@nygaardmt
5 жыл бұрын
Anyone know what changing stand Jay is using??
@marcustangent
5 жыл бұрын
does anyone have a video of a dirt tire change using a tire changing machine???
@marco20838
7 жыл бұрын
hi everyone! i will buy a 2nd hand ktm 250 exc, but it is 2nd hand, it got 11000km and 380h, it had a top rebuild lately, what you guys think should i buy? it is from 2008, i know this is very little detail, but what i am really not sure is if 380h and 11k km is much or few
@marco20838
7 жыл бұрын
in other hand i got an 2005 exc with 9k km, no hour information and it is 1000 euros cheaper
@leroyjenkins4123
Жыл бұрын
What is a rim lock? (my eyes aren't that good)
@iiryyan
3 жыл бұрын
How many tubes were pinched in the making of this video?
@mattkramer5368
7 жыл бұрын
awesome!
@sammchargue8835
7 жыл бұрын
is that a tire stand?
@Battlenude
6 жыл бұрын
Would it not be easier to just grease the inner tire before you start bending with the tool. I use a little piece of swamp with some Industry grease on it, and just run it around on each side before the bending starts.
@bsimpson639
4 жыл бұрын
Step 1: spend a bunch on a tire changing stand. ......... Thanks for watching! LOL
@DynastyJr
3 жыл бұрын
Put some tape around the tongues to not scratch the rim
@jmicm13
7 жыл бұрын
Wow wow wow, you can't bring in a ringer like Jay! We wanted to see you struggle lol
@DirtBikeChannel
7 жыл бұрын
:)
@wildone2163
7 жыл бұрын
would some grease work also instead of baby powder?
@DirtBikeChannel
7 жыл бұрын
I think you can do that without issues, if you find a rubber safe grease.
@michaelj.kastner5165
5 жыл бұрын
Most frustrating thing i have every done/not done in my life
Пікірлер: 182