Another informative video, thank you! I am having trouble with one column in my 276e, so you have given me some things to investigate further.
@RustyNail5856
Жыл бұрын
Great video. always learning from you . thanks for sharing.
@ChrisGonzalesCuuhriz
2 жыл бұрын
Such great information thanks! Underrated channel.
@cutthecurve5726
3 жыл бұрын
Why the heck are you the most amazing vending channel lol
@monkeyhigh000m3
3 жыл бұрын
Thanks you for your videos you always teaching me something new👍🏽.
@lilmunchybaby
Ай бұрын
Yu have turned me into a vending mechanic 😂
@glennkerner1294
Жыл бұрын
I got 2 can coming out ever 3 vends (first two vends give nothing) the 3rd gives 2 cans on a dixe narco 276e. Any thoughts on what's going on? The cam look like it's sitting in a different position then the rest. Is there a way to move the back part of the cam?
@HappyVending
Жыл бұрын
Are you sure your cam setting is correct? Do you have the cans in 3 deep? Do you mean the rotor looks out of position? You can take off the motor and spin the rotor 180 degrees and put the motor back on and see if that fixes the issue.
@dennissmithjr.5370
3 жыл бұрын
Another great video Bill, thanks for sharing.
@georgeboder5047
3 жыл бұрын
Have you ever had a mortor kick on and shoot out all you pop every time you open the door? I replaced it with a different motor and it worked fine for a summer than the same column did the extra same thing again
@HappyVending
3 жыл бұрын
I've never seen that before. Try swapping the motor with one in another column and see if the problem follows the motor.
@GG-ds9hg
2 жыл бұрын
Hi Bill, I just bought a Dixie Narco 276E. I hope you can help me. I can't find a way to test the vend motors when the door is open.
@HappyVending
2 жыл бұрын
Watch this video at 10 minutes in: kzitem.info/news/bejne/xpCKvJx5gJ2edGU
@GG-ds9hg
2 жыл бұрын
@@HappyVending thank you !!!
@Radioman7788
3 жыл бұрын
Thank you Bill. You are the best.
@marqmatmicah
2 ай бұрын
wht about the contacts whn pres the selector plastic/front whn selecting a soda? hope u understand the question
@HappyVending
2 ай бұрын
Those switches are pretty cheap so I just replace them when they go bad. kzitem.info/news/bejne/laR9p2yacXiIkoosi=68zVMhJ0twblmroj
@iqmanufacturing
2 жыл бұрын
We purchased a new motor for our vending machine and the mechanism still wont spin. Any ideas as to why?
@HappyVending
2 жыл бұрын
Check your wires and the connectors on the wires
@OnTimeVending
3 жыл бұрын
Question can u use the same single price motors on a multi price machine
@cutthecurve5726
3 жыл бұрын
I believe the color of the motor and the cam must match
@HappyVending
3 жыл бұрын
Generally, older motors are not interchangeable with newer motors without modifications. You are best to order the motor specific to your machine.
@pamelamason3004
4 ай бұрын
How do you order parts directly from Crane? I don't see any info on how to do that online.
@HappyVending
4 ай бұрын
I usually just call them: 651-224-4391
@ItzJesus124
3 жыл бұрын
I just bought my first vending machine I believe it's a folder machine because its programmed for sell same price for soda.. I want to put monsters in what do I have to do? Do I have to update system
@HappyVending
3 жыл бұрын
If it's one price, then all drinks would have to be the price of Monsters. From my personal experience, Monsters don't sell well enough to dedicate an entire machine to them. What model machine do you have?
@lilmunchybaby
Ай бұрын
My first column isn’t vending I don’t know if it’s because my timing cam is different from the rest of my columns or if it’s the trigger is there a way I can send you a video ?
@HappyVending
Ай бұрын
If you have a youtube account you can upload your video and post the link.
Sorry if I’m spamming this is my third time posting the link it seems like my comment keeps deleting kzitem.infoOYmMzCizupw?si=e_97B_H5HoztWyi8
@HappyVending
3 күн бұрын
@@lilmunchybaby That cam is different because it's a wide column. Honestly, it just looks like the motor is rusted and dirty. You can try taking the motor apart and cleaning it with contact cleaner. Or, you may just need to purchase a replacement motor.
@lilmunchybaby
3 күн бұрын
Ok thanks a lot bill I honestly don’t know how to repay you. You’ve saved me a lot of money with your other videos and I’ve learned a lot for the wide column would I purchase the same exact motor as a regular column and should I just reach out to crane directly ?
@mcarter1990
2 жыл бұрын
Hello, I have DRCR code on my LED display on my DN 368. Do you know what this means?
@HappyVending
2 жыл бұрын
Sorry...I'm not familiar with that code. Post your question on the vendiscuss.net forum...I'm sure someone will be familiar with that error.
@mcarter1990
2 жыл бұрын
@@HappyVending Thanks Bill
@Wee-WorldMiniaturesandProps
2 жыл бұрын
Is there a way to contact you about a machine is just got? Dncb 440mc/252-8 machine
@HappyVending
2 жыл бұрын
My email address is posted in the "about" section of the KZitem page. That is the best way to reach me.
@mcarter1990
3 жыл бұрын
Was your water 2 deep or single depth? Thanks
@HappyVending
3 жыл бұрын
2 deep
@mcarter1990
3 жыл бұрын
Thanks. I got 2 bad Ben motors to change. I was able to fix royal the other day. Just unplugged it and plugged it back in. Fixed!!
Пікірлер: 44