Three years later for me. Watching that bearing and spring reveal tbemselves kept me from letting the same thing happen. Thanks man!!
@Crosstourertony
17 сағат бұрын
Never too late, glad the video helped you 👍
@mtyler4992
7 ай бұрын
Brother, you did this video just for me. Thanks, I should have looked here before losing my ball bearing LOL!!! After tearing up the living room, it was recovered. But their directions are terrible.
@Crosstourertony
7 ай бұрын
Happy you managed to find your ball 😀 thanks foreaving your comment 👍
@allthegearandnoidea2023
8 ай бұрын
2 years later and still helping out. Just changed mine. Thanks. 👍
@Crosstourertony
8 ай бұрын
Glad it helped 👍
@manuelwinkler9914
3 ай бұрын
Yes, thanks as well from Germany! - This video helped me out. Quick andy easy to understand. - Thank you!!! 😀
@Crosstourertony
3 ай бұрын
Hi thanks for leaving your comment. Im glad the film has made your life a little easier. Ride safe ✌️
@Crosstourertony
8 ай бұрын
Great, glad it made your life easier😂 thanks for watching and leaving your comment 👍
@axamax1
2 жыл бұрын
After undoing 10mm nut keep pressure on the black plastic piece and push the end of the lock out. Fit new lock in (Lug uppermost) and fit 10mm nut. No drama with ball bearing. Thanks for video.
@flippy66
11 ай бұрын
Exactly what I was thinking, there doesn't seem to be a need to remove that black plastic part at all.
@philclough
10 ай бұрын
useful, I'm about to switch out my lock too - thanks for posting
@Crosstourertony
10 ай бұрын
Hi thanks for your kind words, glad my video was of help. Ride safe and Ride your Dream
@hartley383
3 жыл бұрын
Searched for how to change the Givi lock and look who popped up!! Nice one Tony, hope youre keeping well.
@Crosstourertony
3 жыл бұрын
Hi there, I'm doing fine thanks. Yes I pop up from time to time on KZitem 🤣🤣 Take care and ride safe Hartley. I have subscribe to your channel too. let's fly 🚀🚀
@Echofield
5 ай бұрын
Thanks very much for the video, very helpful. Unfortunately the idiot at this end didn’t learn from watching you drop your ball bearing and did exactly the same thing. Also managed to find it.
@Crosstourertony
5 ай бұрын
Thanks for leaving your comment. You must pay attention to teacher. Could do better anyway glad the video helped you and you found your bearing 👍😁
@rfmeyer371
3 жыл бұрын
Thank you, glad you grabbed your ball
@Crosstourertony
3 жыл бұрын
😂😂
@rc2634
Жыл бұрын
Thanks for the detailed video. I didnt need to replace the lock but it was getting hard to turn the key. So I put it apart and put some oil in the famous ball bearing 😁 It works perfectly now! Thanks!😎
@Crosstourertony
Жыл бұрын
Thanks for leaving your comment, appreciated much. When I returned from my road trip to Nordkap I had to take it apart again and clean it as road dirt does get inside 😢
@D.E.X
3 жыл бұрын
Nice vlog. I was looking for something that would give an indication on the level of difficulty involved, and, to be honest, once you had the two screws out and the latch assembly out, I paused, grabbed mine and did the job. Figured there'd be a ball-bearing on a spring, so I didn't get surprised like you did. Thanks for leading the way in!
@Crosstourertony
3 жыл бұрын
Lucky you, you learnt by my mistake 😅
@thomasjamesii
2 жыл бұрын
Thank you much for the video!!! I was able to change my lock on the same top case within 5 minutes with your help.
@Crosstourertony
2 жыл бұрын
Thank you for taking time watching and commenting. Happy my video helped you 👍
@YO748S
Жыл бұрын
Spot on mate the nut came off the barrel, looking at it was a bit tricky, but the video made it simple 👌 👍
@Canada1608
3 жыл бұрын
Well done Tony! You have been lucky to find the ball bearing ;-)!
@Crosstourertony
3 жыл бұрын
That I was Gilles 😅
@inghelmheidubrand1545
Жыл бұрын
Nice Video with valuable information. Great help! Thank you. 👍
@Crosstourertony
Жыл бұрын
Thanks for your comment. Happy that the video was helpfull
@IanTed
2 жыл бұрын
Thanks, when I picked up my new Ducati they gave me a key barrel to match my key, now I just need to buy the Givi box and change the barrel. The Ducati box is expensive but made by Givi, equivalent box is so much cheaper.
@Crosstourertony
2 жыл бұрын
Glad my video was of some help Ian 👍
@marcoflores9838
3 жыл бұрын
Thank you very much!!! it was very useful. I was able to solve the problem!!!
@Crosstourertony
3 жыл бұрын
Thanks for watching the video and leaving your comment. I'm glad you were able to solve your problem.
@DiggeryDoodle
3 жыл бұрын
great simple vid
@Crosstourertony
3 жыл бұрын
Thanks for your comment, as you can see it is a simple job 👍
@JoonesAdventuresMC
3 жыл бұрын
Thanks for the video 👍
@Crosstourertony
3 жыл бұрын
Trying to think of videos to make 🤔 whilst locked in at home 😂
@JoonesAdventuresMC
3 жыл бұрын
@@Crosstourertony 😂
@fable971
2 жыл бұрын
nice thank you !
@Crosstourertony
2 жыл бұрын
You are more than welcome. Glad my video helped you. See you soon
@eugenerudman
2 жыл бұрын
love the number plate :-)
@Crosstourertony
2 жыл бұрын
Easy 😂
@dickiea8048
2 жыл бұрын
The keys with these Givi locks are absolute garbage. They crumble after a short period of time. I've had two go the same way in a year.
@Crosstourertony
7 ай бұрын
Thank you for leaving your comment so far my keys have stayed good, 👍
@brettbarker8444
2 жыл бұрын
Aaaand you lost me at 0:55. EM-MOTO sent me mine with the key locked in the box.
@Crosstourertony
2 жыл бұрын
Shit how have you opened it? Or did you return it
@brettbarker8444
2 жыл бұрын
@@Crosstourertony Nothing yet. I think I might drill out the lock of I can do it without damaging the case. So far the company I bought it from hasn't been too helpful.
Пікірлер: 48