Very good video, liked how you described everything in detail from where the hood latch was to how to angle the 17mm wrench.
@MCFIXIT
2 жыл бұрын
You are welcome!
@sergioflores3766
2 жыл бұрын
It worked perfectly for me I did this job by myself in 15 minutes thank you very much I already have 96,000 miles on my sonata the belt was already very damaged
@MCFIXIT
2 жыл бұрын
Congratulations! Thanks for letting me know!
@nardcore661
Жыл бұрын
What year was your car?
@sergioflores3766
Жыл бұрын
@@nardcore661 2016
@tlynn609
6 ай бұрын
@@MCFIXITI have a question please. My belt was broken so it was replaced. Everything was fine for 2-3 days & now my lights are starting to flicker & power steering light came on(same symptoms a few days before belt broke). Could it be one of the pulleys even though so squealing sound is coming from then while car is on?
@carimurel9348
5 ай бұрын
I had a squeaky noise come from mine@@tlynn609
@mfish9374
7 ай бұрын
Very good, thank you for your help. Took my son and I 30 min or so to fix his car. I am not a fix it guy, but you made this very understandable.
@MCFIXIT
7 ай бұрын
Glad you were able to accomplish this fix! Thanks for watching and commenting!
@marcusnorton456
2 жыл бұрын
Those belts aren't too bad to get off, but getting on can certainly be a challenge. Thanks for this informative video on how to take it off and put it back on a new one!
@MCFIXIT
2 жыл бұрын
You are welcome. Thanks for watching and commenting!
@theone4476
Жыл бұрын
Best video I’ve seen. Very straight forward. I changed it in literally 5 minutes by myself. Thanks
@MCFIXIT
Жыл бұрын
Glad to hear it was helpful!
@DragonGodest92
Жыл бұрын
Mine snapped yesterday during this Wisconsin storm, fixing myself today because of you. Thanks man 💪🏾💪🏾
@MCFIXIT
Жыл бұрын
Glad I could help. Thanks for watching!
@Manuel.h.g
6 ай бұрын
what happen when they break
@ethanravensdale
11 ай бұрын
Thank you!! I had a heck of a time getting the wrench to stay on the tensioner. I had to use the other side of the wrench and then it went right on. ✅
@MCFIXIT
11 ай бұрын
Glad it worked for you!
@ImBriskiBaby
9 ай бұрын
Thank you! Thank you! Thank you! I will say you made it look easy haha but definitely good direction! I was able to get it done with your help! Hardest part was getting the new belt on 😭 ! I have never done it before but definitely won’t hesitate to do it again! Thank you 🙏
@MCFIXIT
9 ай бұрын
Glad you were able to do the project yourself! Thanks for commenting!
@TJPatt
5 ай бұрын
Thank you, Sir! Once I got the right wrench (same one from video), it took me about 20 min to put the new belt on (Walmart wrench kept slipping 😅)
@MCFIXIT
5 ай бұрын
Glad it helped. Thanks for watching and commenting.
@kill863
Жыл бұрын
Im about to try this right now. Goin step by step with you. Same model car as well.
@MCFIXIT
Жыл бұрын
How’d it go?
@kill863
Жыл бұрын
@@MCFIXIT Man you helped me big time bro... Went almost to easy lol!!
@MCFIXIT
Жыл бұрын
That’s great news!
@mikezupancic2182
Жыл бұрын
If someone isn't smart enough to know how to open the hood, they shouldn't even attempt this.
@MCFIXIT
Жыл бұрын
I like to full instructional videos. Each vehicle has different locations for the hood latch. So it can be helpful to some. But I get what you mean!
@lego7889
Жыл бұрын
Thanks got it done in 10 mins
@MCFIXIT
Жыл бұрын
So glad it was helpful. Good job on doing it yourself!
@Gorillazlover123
11 ай бұрын
Shocking the white paint isn't missing. A lot of them do
@MCFIXIT
11 ай бұрын
Yes that happens for sure!
@OzarkCreatures
2 ай бұрын
Thank you. I was trying to pull the belt over the alternator pully lol
@MCFIXIT
2 ай бұрын
You are welcome! Thanks for watching!
@robertopacheco6266
2 ай бұрын
Thanks. Blessings
@MCFIXIT
2 ай бұрын
You are welcome! Thanks for watching and commenting!
@fredc8618
8 ай бұрын
DID THIS TODAY! USE A SHORTER WRENCH SO IT GOES UNDER THE MOTOR MOUNT BRAKET AREA AND ARE ABLE THE MOVE THE TENSIONER MORE ITS A BREEZE AFTER THAT YOU DONT NEED 2 PEOPLE
@MCFIXIT
8 ай бұрын
Thanks for the tip!
@sethbrees8268
2 жыл бұрын
Thanks, this helped me out a lot. I thought I was going to have hire an election to fix my issue.
@MCFIXIT
2 жыл бұрын
You are welcome. Thanks for watching and commenting!
@Rjj2721
2 жыл бұрын
Hire a what? You mean mechanic?
@justinhorton2613
Ай бұрын
I know this was 2 years ago but do you happen to know the length of the wrench you used?
@MCFIXIT
Ай бұрын
I don’t but it was a standard size (not extra long). Sorry! Thanks for watching and commenting
@seriouscyrus33
3 ай бұрын
Is this the same steps, for the 2.0 turbo model? Or extra steps.
@MCFIXIT
3 ай бұрын
Great question! I’ve not worked on the model of it. Let me know what you find out!
@mashedtaters4717
2 жыл бұрын
Good fix. Keep the vids coming
@MCFIXIT
2 жыл бұрын
You are welcome. Thanks for watching and commenting!
@allansalvador9830
2 жыл бұрын
Great video! We have the same car. May I ask how many drive belts does our car have? The dealer quoted me for Qty. 2 serpentine belt replacement for $450.
@MCFIXIT
2 жыл бұрын
Sorry, I can’t remember. I did this on a friends car a while ago and just got to editing the video. It might have a second belt for accessories.
@jeromerozier872
Жыл бұрын
Its 2 belts
@emmanmaggs
7 ай бұрын
Worked Perfect thank you🙏🏾
@MCFIXIT
7 ай бұрын
You are welcome. Thank you so much for watching and commenting!
@japhysynder
Жыл бұрын
Love your channel, fellow Ridgeline owner. 🖕 Great info thank you. I need to do the serpentine belt on the Ridge, next possible video? Cheers. 🙏
@MCFIXIT
Жыл бұрын
Thanks 👍. I will need to do the belt in about 40,000 miles so it might take some time before that one is filmed. It’s a pretty easy process. Make sure to get a serpentine belt tool (long, thing tool with a 3/8 drive on the end) and a basic mm socket. I’m sure there are other KZitem videos on it. Thanks for watching. Hope you can successful change out the belt.
@japhysynder
Жыл бұрын
@@MCFIXIT Thanks so much for the tips! Great channel, trying to watch all the Ridge vids. Great content! Cheers and thanks again.
@MCFIXIT
Жыл бұрын
Thanks so much! I appreciate the positive feedback. I love my Ridgeline and hope to have for many more years to come!
@crazyloco8844
Жыл бұрын
15 minutes 😂😂😂!!!! You funny bro!!! You must got munchkin hands!!!
@MCFIXIT
Жыл бұрын
My hands are actually pretty large I’m 6’3’’. Did you get it work?
@crazyloco8844
Жыл бұрын
@@MCFIXIT I was replying to one of your followers who said he did the job in 15mins!😂 There's NO way you can get that done in that amount of time especially by yourself! I tried to do it by myself for an hour and a half, and until I asked my wife to help me, I wouldn't of been able to do it. YOU do need another person to help you, for sure! Yes, your video was very helpful. Thank you. Now, I might have to change the water pump belt later. How do you do that?
@MCFIXIT
Жыл бұрын
I have not done it in this vehicle before. Not have done them numerous times. This was my parents vehicle but they sold it. So I won’t have a video on this.
@Tradrnq
2 жыл бұрын
Would the tension ever need to be adjusted when doing this exact car? Or should it just slip on with the same tension as before?
@MCFIXIT
2 жыл бұрын
It shouldn’t. Your tensioner might be busted if it doesn’t work like this. It should hold it in place once the belt is properly lined up.
@Biamondos982
10 ай бұрын
Thank you!
@MCFIXIT
10 ай бұрын
You are welcome. Glad it was helpful!
@Nardology
6 ай бұрын
How did yall get it on I’ve been doing this for 3hours this some bs
@MCFIXIT
5 ай бұрын
Were you able to get the belt on? There is some difficulty due to the tight location
@Nardology
5 ай бұрын
@@MCFIXIT Yeah i was able to get it on, i flipped my wrench to the open side instead of the closed circle and I had to buy a shorter length to get enough clearance to fully extend the tensioner making it easier to put the belt on
@donzirocno
Жыл бұрын
For clarity, you started at the crankshaft, then ac, then alternator and then lifted the tensioner and slid the belt under?
@MCFIXIT
Жыл бұрын
That will work. You just want to be sure to leave room for the tensioner and be around each part correctly. There are many ways to do this with what part you start with going around. Thanks for watching and commenting!
@donzirocno
Жыл бұрын
@@MCFIXIT copy that! Thanks for the response and this video!
@MCFIXIT
Жыл бұрын
You are welcome. Best of luck on your project!
@locox7575
2 жыл бұрын
Thank you
@MCFIXIT
2 жыл бұрын
You are welcome!
@user-qn8fg1kx6i
Жыл бұрын
استخدم كماشة الاشتراك لتثبيت الحزام على بكرة الدركسون وكماشة اخرى على بكرة الكرنكcrank ثما قم بالتركيب الثنيتين الصغرى بين البكرات الصغرى وايضا تحتاج لسلك تربيط البلاستيك لتثبيته مع قاعدة كرسي المكينه اذا كنت لوحدك تعمل😅
@argentiusdarkkon3918
5 ай бұрын
Awesome video👍
@MCFIXIT
4 ай бұрын
Thank you for watching and commenting!
@haroldclaybornjr
2 жыл бұрын
Very helpful thank you!
@MCFIXIT
2 жыл бұрын
Glad it was helpful! Thanks for watching and commeting!
@bobbobby943
10 ай бұрын
hello so the the water pump pulley need its own seperate belt if so whats it called? im going to replace them and i want to make sure i get the right ones both are mine are torn.
@MCFIXIT
9 ай бұрын
Accessory belt. Sorry, this was on my parents vehicle and my dad just wanted to serpentine belt done. So that's what I did. They no longer own the vehicle. I'm sure there's a video on it though!
@sketchcontent580
Жыл бұрын
Thanks brother!
@MCFIXIT
Жыл бұрын
You bet! Thanks for commenting!
@W11STER11A
10 ай бұрын
Thank you!!!!
@MCFIXIT
9 ай бұрын
You're welcome!
@Almighty_jones
2 жыл бұрын
I changed it car still not starting with jump
@MCFIXIT
2 жыл бұрын
We’re you having starting problems before the replacement? Was your belt broken or thrown off?
@devionwilliams5307
Жыл бұрын
What size belt?
@MCFIXIT
Жыл бұрын
I used a Contential belt 4060397F. Hope this helps!
@ilyabulgak510
Жыл бұрын
Just put it on the pulley first and alternator last
@MCFIXIT
Жыл бұрын
That’s def an option!
@abattewell
Жыл бұрын
cant believe the dealership wants to charge me $350 for this job, while they already are doing a factory engine replacement.
@MCFIXIT
Жыл бұрын
That’s crazy sauce!!! It’s so easy to change out. It would take probably less than 1 min if done before the engine was installed
@austinmoya2046
6 ай бұрын
Also helps if you actually have the right tool 😅
@MCFIXIT
6 ай бұрын
Were you able to fix it yourself?
@jamesabarela
7 ай бұрын
Why is it that whatever task they are showing you how to do, looks simple and easy in the video, but in real life, you find yourself beating the car with a hammer because your so frustrated that the belt didn't go on as easy as they showed in the video .....lol ..my tensioner was tense and it took a lot of force to release that tension in the first place, and you have to be careful becaus the air conditioner line is right where your working and its easily dented or damaged on the process....I spent literally 2 whole days trying to get my belt on. Maybe it's just me and I'm a bit mentally retarded but that sucker was hard it even broke my long tool designed for the job...uhgg never again
@MCFIXIT
7 ай бұрын
Sorry the project was more difficult than you expected. I try my best to show exactly how I did it. Were you able to eventually finish the project?
@haydaralsultaniu2567
2 жыл бұрын
ماهو رقم قياس السير او الحزام
@crusherfiras4214
2 жыл бұрын
6pk1007
@johndoe3485
2 жыл бұрын
Bruh, i cant even fit my hands down those holes. I dont get how this dude puts his whole arm down there.
@MCFIXIT
2 жыл бұрын
I’m not a little guy by any means. This was done on a 4 cylinder. Is yours maybe a v6? That might explain the difference in size.
@rogeliorenteria2529
Жыл бұрын
i Hate Hyundai with a passion its every month this car gives me problems
@MCFIXIT
Жыл бұрын
Sorry to hear that. All cars have problems but some of a lot more than others. Best of luck on your repair
Пікірлер: 107