I was wondering why my Oreck was SO hard to push. I discovered it could be the belt. I took the bottom off, and sure enough, the belt had come off the drive mechanism. It had to be the original belt, since the spare was still in its compartment. This was my mother's vacuum, and from the date on the Oreck label, was manufactured in the middle of March of 2003. I figured after 21 years, it was a good time to break out that spare belt. The original belt looked a little less pliable after all this time. The spare belt was STILL tough to get back on. I had to use my number 2 screwdriver to apply some leverage to get the belt over that drive mechanism. Then I turned it like you suggested. I turned the vacuum on, and I could tell the difference right away. The vacuum moved forward the tiniest fraction of an inch while the handle was still in the upright position. When I went to push it forward, it was like night and day! No resistance! It moved like a normal vacuum! Now I won't dread vacuuming any more, knowing I won't have to fight to get it to move forward. Thanks for your help!
@1stBumbleBeeMaster
5 жыл бұрын
Thanks so much for this video. We have had ours since 1999 and its now 2019 and the original belt has only just broken. I cannot believe it has lasted 20 years. Oreck is the best ever. I hope they still make them the same as they did back then. I am getting another one for some ones Birthday.
@boredcheese7927
2 жыл бұрын
They supposed to be changed every 3-6mos 👁👄👁
@luckyluciano9123
5 жыл бұрын
Thanks for the helpful video! I wasn't even sure if this vacuum had a belt cuz I couldn't see it when I turned it over. It's a pain in the ass unscrewing 5 screws just to get to the belt, but honestly I probably wouldn't even have done that if I didn't watch this video, so thank you again for saving me the trouble of figuring out what to do to be able to replace the belt. And the crazy thing is the belt wasn't even broken, it just slid off the spindle. And as I was vacuuming something got caught up under the vacuum and the belt slipped off the spindle again, poor design in my opinion. But great video and thanks again! I really appreciate how u said to just place it on the spindle and turn the roller and let the roller put the belt on instead of busting knuckles trying to get that thing on! Great method and worked perfectly!
@judidozier
Жыл бұрын
I thought I was going to have a stroke trying to get the new belt on! It was so hard to stretch. I really appreciate this video though, it really helped!
@kansaidan2302
3 жыл бұрын
I used the easy-access single screw side panel. Took all of 2 minutes for the repair ....... original belt was broken and still near the drive spindle behind the panel.
@tvento
4 жыл бұрын
There is an access panel on the side of the housing To change the belt. No need to remove the bottom plate.
@Marc2k6
3 жыл бұрын
🤣😂🤣😂🤣😂 I thought he was changing the roller.
@Ms.J90
2 жыл бұрын
Thank you so much
@sandy0066
2 жыл бұрын
you just saved me tons of frustration. the bottom panel is not phillips and i didn't have the right tool.
@metroi7622
7 ай бұрын
Thank you so much!!
@TheUnofficialRockandRoll-is8uq
Жыл бұрын
Thanks, just what I needed to see, much appreciated.
@BigMOCrypto
5 жыл бұрын
I know this was done some time ago, but it still works ! Thanks a bunch
@aturqueza
6 жыл бұрын
I was going to pay to have my vacuum’s belt change but found this great tutorial on KZitem. ✨🌟✨
@jenrasmuson4372
Жыл бұрын
Thank you so much for your video! It was incredibly easy and my $5 garage sale find is working like a champ!
@christine9863
9 жыл бұрын
Thanks ! Saved me a trip to oreck. The belt had just slipped off but otherwise in great condition and they would've charged me 50 bucks..
@shirley1811
3 жыл бұрын
My Oreck has a side door to change the belt. I actually didn't know about the door my son had to show me. After I took the the bottom off etc.
@kmostrach
3 жыл бұрын
Thank you! Nice video.
@debrafrakes6479
5 жыл бұрын
some of us are not strong enough to get back on. im donating the Oreck. will be usng the Dysons
@ashleymae250
5 жыл бұрын
Thanks you helped me fix my vac
@cariboux2
Жыл бұрын
Thank you!
@BlueStreet06
6 ай бұрын
Thank you!!!
@1voiceofstl
4 жыл бұрын
If your Oreck is getting hard to push,,it needs a new roller.
@dalex60
4 жыл бұрын
The brush, “kind of spins”?!? If it didn’t spin, how effective do you think it would be?!?
@jamesmcginley4648
2 жыл бұрын
I have a Oreck xl extended are there different sizes brushes
@bethwilcox3400
2 жыл бұрын
Lots of hair and scatter rugs in our house -- the belt has been changed way too many times. As much as I've loved my Oreck (it's predecessor was an irritatingly cumbersome Kirby), it's time for it to find a new home.
@anthonyshea5181
2 жыл бұрын
Watched video and mine has torx.. Screws not Phillips if anyone's wondering why you can't get screws out. FYI
@rileynoordam7415
4 жыл бұрын
After changing the belt it only turn on for a second then clicks off. Please help.
@newutubeuzr
9 жыл бұрын
Does yours NOT have the side panel access to the belt?
@StinkySobaccos
3 жыл бұрын
Our Oreck XL does not
@janicemosso7887
8 жыл бұрын
Mine does not have a side panel. It's a commercial so don't know if that is why there is no panel.
@axelfoley1406
6 жыл бұрын
Sure? It doesn't really stand out, but you'll see a single screw on the left side. I have the blue commercial XL. These panels should be in all the models. Allows for much easier access.
@mollymarik-diverdi9861
4 жыл бұрын
nice vaccuum
@erthdelta640
Жыл бұрын
it's way easier to keep using it broken.
@nobutsaboutit
8 жыл бұрын
Would have been a lot easier to take out the 1 screw on the side panel.
Пікірлер: 39