Awesome video as always!!! I recently rescued a PS3 with a bad Blu-ray Drive so I had to remarry the spare I had to the main board. I think it will be an awesome video for you to make explaining the whole process. Thank you for all you do. Keep on keeping on!!!
@krillen64
Жыл бұрын
I just run movian on my soft modded PS3, put in any dvd or bluray and play it. I found that to be the easiest way to play any dvds or blurays for me.
@ferfeenix
Жыл бұрын
do you have to change the regions manually with it? or it literally plays any region automatically?
@madame-moon
Жыл бұрын
I have a PAL ps3 and tried this too, but a blu-ray from the US didn't work.
@CrossCuntryFranco
5 ай бұрын
How are you getting Movian to play blurays?
@dantesquivel0
Ай бұрын
This didn't work for me, Movian sees the DVD in the drive shows something like TS_VIDEO as a folder and then nothing inside that folder
@thedragonofdojima4157
Жыл бұрын
I can finally play my criterion movies in the Middle East! ❤❤❤ thanks man you earn my sub
@MrMario2011
Жыл бұрын
Perfect.
@stu8553
Жыл бұрын
For anyone struggling to get this to work with PS3HEN, I used method 2 - Webman mod. After you have changed your BR or DVD region in the Webman settings, press save but rather than pressing restart press circle to exit back to the xmb and your disc should play. Only downside is that you have to do this every time you boot up the PS3 but not a huge issue. I am on a PAL PS3 slim and have been playing region A (US) blurays & region 1 dvds with this method. Method 1 didn't work for me on HEN.
@p1k4x
9 ай бұрын
Must be someone with my 4.86 firmware, even setting region. Console changes resolution and just says region doesn’t match
@Crabo99
9 ай бұрын
Where do you change region in webman settings??
@GetzeAvenue
6 ай бұрын
When I do exactly what you say, the configuration is never saved even by pressing circle, what can I do?
@stu8553
6 ай бұрын
@@GetzeAvenue For me after I change the region and press save at the bottom, I just hit circle to get back to the PS3 menus and my disc plays fine. The setting never saves after powering off unfortunately. I ended up just investing in a region free bluray player in the end.
@devan_danger
Жыл бұрын
I see a ps3 modding video from Mr Mario, I smash that like button
@devan_danger
Жыл бұрын
I'm curious to try this method to play pal psone games. In the past I've experienced region blocks preventing me from displaying pal exclusive games like hellnight over component cables. HDMI still works ok but for whatever reason analog video out is blocked. Probably to avoid bugging out analog only TVs. Still a surprise with a cex unit
@MrMario2011
Жыл бұрын
Might be worth trying? I haven't tried PAL PS1 or PS2 games on my consoles, so hopefully that helps.
@devan_danger
Жыл бұрын
Oh and it's a pal iso btw. Don't own any pal discs
@frogz
Жыл бұрын
me too, i am not going to watch the video as my ps3 is already modded but i'll still click like to boost his numbers!
@frogz
Жыл бұрын
@@devan_danger be careful playing psx games on faster than 2x drives, i had a copy of persona EXPLODE in a dvd burner years ago trying to back it up
@Shnowz
Жыл бұрын
you're a priceless asset to us lazy folk who have forum allergies, thanks again Mario!
@MrMario2011
Жыл бұрын
Forum allergies?! LOL, perfect, although no worries. Forums can be pretty cool.
@Whisky115
3 ай бұрын
This doesn’t work. Tried all Methods and It does open up but then says This disc cannot be played. Region code is not correct
@dantesquivel0
Ай бұрын
Same issue.
@ModzvilleUSA
Жыл бұрын
Just followed this guide to switch my cecha00 to North America. The reversed controls were messing me up. Worked like a charm! Rebug 4lyfe :D
@MrMario2011
Жыл бұрын
Woo!
@nam8553
4 ай бұрын
what about for PS1 and PS2 games? (playing NTSC-J on NTSC-U/C) as an example does this video guide work for that or would u need to make a guide for that?
@kc-km8du
Ай бұрын
Curious about this as well
@juniorguirola9017
Жыл бұрын
Hello Mr. Mario, this method is used to convert a PAL console to NTSC. Why on my old TV the image is in black and white
@PROShineKITO
Жыл бұрын
Because your tv dies nit suport NTSC image from the console
@StreetWorksMedia
Жыл бұрын
MrMario thank you for these amazing videos. I really appreciate them. I have a question if you don't mind answering, is it possible to change the region on a hacked ps4? I have heard that you can do that in debug menu but I'm not sure. Maybe this could be a good video idea for you to make. Thank you very much for your videos!
@7LiquidSnake
5 ай бұрын
I have the cobra 8.40 cfw, ps3 slim, my region 1 dvd doesn't work
@connerterry4882
Жыл бұрын
Good news if you have evilnet custom firmware you can change the region of your console with out Rebug you just need to go to settings and toggle debug settings on and make sure if you are doing these for dvds that your tv can handle 50hz video mine can’t so I need to turn on some other setting
@petersvideofile
6 күн бұрын
This is really fantastic, I was hoping to make a system for someone else that wouldn't require them to change any settings. Are there any mods that will auto change the bluray region based on the disc that is inserted?
@kiraisonline
8 ай бұрын
Confirmed working with method 1 using multiMAN on a USA PS3 Fat (non BC model) with CFW Evilnat 4.90 w/Cobra 8.4 embedded. Changed region to region B on multiMAN to watch some PAL region blu rays and worked flawlessly. Did have to exit out of multiMAN after changing settings and go back to XMB for it to read the bluray though. Did not test DVDs since I don't have any imported DVDs to test, however.
@7LiquidSnake
5 ай бұрын
I have a slim cfw same ev4.90, cobra 8.40, pal console, my region 1 dvd does not work...don't understand why?
@felixman9691
6 ай бұрын
Dude thanks so much for always putting great tutorials out
@MrMario2011
6 ай бұрын
No worries!
@gabrielmiller9854
11 ай бұрын
It’s worth mentioning that if you only have PS3hen and multiMAN it will only work for Blu-ray’s … unfortunately dvd’s won’t no matter what
@Rezed78
Ай бұрын
The movie disc region is not appear on me😢
@time4manmode945
Жыл бұрын
Oh great now I can buy the Europe dvd of King Kong lives the only king film in missing from my colleccion but the western release is so expensive, finally I’m gonna be able to watch the worst kong film😁
@MrMario2011
Жыл бұрын
LOL AMAZING
@MrBroken030
Жыл бұрын
how do you deactivate hdcp to get a dvd or bluray via rgb on a crt?
@MrMario2011
Жыл бұрын
HDCP doesn't apply to any of the analog output.
@MrBroken030
Жыл бұрын
@@MrMario2011 rgb got the green tint when using an rgb cable, just tested it last week, it maybe not hdcp but its somekind of copy protection similar to it. the ps2 also had that issue but there was a software solution for that too, is there something similar for the ps3? would be nice to be able to use the ps3 a all in one solution to play dvd and blurays via rgb on an old crt, cause modern bluray players dont offer analog rgb output anymore.
@alejandrotapiag3823
6 ай бұрын
Is it possible in any way to change or modify the region code of a ps3 game? I bought a japanese copy of MGS: Legacy Collection and the language is only in Japanese, and I would like to play it in English, but anywhere I searched for more info on this subject I found nothing. Should I surrender and buy an US or EU copy? Thanks in advance.
@STOPTHECLOWNS581
Жыл бұрын
I have rebug and I switch to Europe and it loads in and goes black but then the DVD comes up says the region is wrong
@mogueraguh
Жыл бұрын
Thanks for this video but it seems these methods aren’t completely certain to work. Ps3s and region coding is so unnecessarily barbaric and more tinkering has to be done !
@judecorbin1893
Жыл бұрын
Agreed! Been able to play certain Region B movies from my collection but a select few still don't work. Just gonna buckle down and finally invest in a region free blu ray player
@ThrashTrash120
Жыл бұрын
Just wanted to say that you can do this using EvilNat 4.89.3 PEX CFW now, instead of needing to downgrade to use ReBug!
@connerterry4882
Жыл бұрын
How do you do that
@dantesquivel0
Ай бұрын
Can you explain the process please?
@ProjectIdeal
7 ай бұрын
webman region change is working great! thanks!
@MrMario2011
7 ай бұрын
Nice!
@gregoirepierre
Жыл бұрын
Hi, Thank you for the video. I'm looking forward to trying this. I have a question though: why this CFW? Is it a function that is only available in this CFW and not the earlier or later version? Any idea why it was removed? Thank you.
@MrMario2011
Жыл бұрын
That's the latest and last FULL Rebug custom firmware, which contains all the options for CEX and DEX. Newer CEX only firmwares don't contain the full development options.
@ItsAubreeyy
14 күн бұрын
I have a Dexter's Laboratory region 1 disc and it does not play
@electrocity2000
Жыл бұрын
UK PAL PS3 slim with CFW/Cobra/Multiman here and it still won't play an NTSC DVD. The message is "This disc cannot be played. The region code is not correct."
@MrMario2011
Жыл бұрын
Hopefully method 3 works?
@electrocity2000
Жыл бұрын
@@MrMario2011 I'm definitely going to try method 3 tomorrow. I'm confident it will work.
@electrocity2000
Жыл бұрын
Ok so I've just downgraded using method 3, unfortunately it doesn't work. Switching to North America region and putting in a PAL disc gives what I would expect, a message saying the system can't play PAL discs. Putting my region 1 disc in still gives the region code incorrect message. I don't get it. I've literally turned my PS3 into a North American version so surely it should play region 1 dvds. Maybe the drives are hardware locked?
@mogueraguh
Жыл бұрын
It’s the same for me I’m in pal region trying to play a ntsc dvd. It says region code is not correct even though every possible config is set to North America. Its very upsetting 😢
@electrocity2000
Жыл бұрын
@@mogueraguh I think some PS3 models have hardware locked drives, in which case there is nothing at all we can do.
@bobbus_74
Жыл бұрын
I still haven't modded my PS3. About time I did.
@MrMario2011
Жыл бұрын
Would recommend it!
@deadlydom.
5 ай бұрын
Hi I did the region change on multiman and the dvd loaded fine but it’s only playing sound from the movie but the screen is blank, any idea why?
@dantesquivel0
Ай бұрын
Has anyone found a way to play USA DVDs on a Japanese console? BlyRays work just fine, games work just fine, cds work great - but I can't get past the DVD region locks
@gabrielmiller9854
11 ай бұрын
Did it with multiMAN and ps3hen but it still gives the wrong region code error when I quit and try to play the disc 🤦♂️ Edit: only on dvd’s (Blu-ray’s change fine)
@mrmanny1418
10 ай бұрын
I tried your methods, but to no avail seems the results are worse than changing multiman settings, now it goes to the audio navigation screen (which is where it went before) but now it goes to a black screen! I’m trying to play region b bluray ( dr who series 10)
@writtenskate522plays
7 ай бұрын
I set my PS3 to taiwan, and now it will not display. I do not have an av cable so I dont even now if that will work. It will only display the hdmi is detect page, and after that, it has sound, but no video
@DJMONKEYFINGAZ
2 ай бұрын
Multiman method not working for me with HEN. Anyone got any advice?
@krimsonklaww611
8 ай бұрын
When i try to open multiman, it just opens, loads for a few seconds, then closes itself.
@jet7759
Жыл бұрын
This doesn't seem to work for me i have a cfw ps3 and im trying to run a region 1 dvd. I followed the steps and it wont work any help?
@DCBEATS209
Ай бұрын
I have a Japanese ps3. Will this work the same way??
@timdark9282
10 ай бұрын
Hi, I just did this procedure on a CECHA01, and unfortunately, it didn't work. I'm doing exactly what you did however when I did this process I left my region 2 pal disc in the drive, could this have somehow effected the process? Also I downgraded from 4.90, is it possible that this firmware does a.patch on the blu-ray drive? Your input and help would be appreciated. (I did the 3rd option)
@ericritchie6783
8 ай бұрын
The trouble with PAL region ps3 is you buy the ps2 classic editions, they're running internally at 60hz but the ps3 only outputs at 50hz for SD CRTs... And and, you know, you really want to play them on ya ol school TV yo... most our CRTs can do 60hz over RGB scart anyway, so 480i 60hz is what you want and having bad frame pacing on a "remastered" game version is a sadness... That's the nice thing about PAL Wii there is non of this nonsense, all games properly support both 50/60 hz and you simply choose in the console settings. Xbox 360 looks to support 480p better on VGA monitors also, I do want to try make a ps3 output at SD 60hz though because my biggest CRT is a widescreen SD and I'd like to play my ps2 classics on it because it's a nice looking/condition rounded front Phillip tube.
@BackLogH3ro
Жыл бұрын
Can you play both PAL and NTSC Playstatio 1 Games with this Method?
@MrMario2011
Жыл бұрын
Haven't tested that myself, but worth a shot?
@BackLogH3ro
Жыл бұрын
@@MrMario2011 I Tested it ! It works
@MScrapyard
Жыл бұрын
Sadly even with method 3 I couldn't get it to work. I heard somewhere that at some point Sony changed the disk-drives and hardcoded the region, so maybe that's why it doesn't work. Mine is from around 2009.
@pixellart6589
Жыл бұрын
Hi @MrMario2011 and all the community! I did method 3 (downgrade the firmware) on my PS3 CECHA00 NTSC J (PS2 backward compatible) to play PS2 PAL games. I can only read ps3 games now (impossible to read bluray movie or PS2 games). Thanks for your advice.
@chrisohrling149
5 ай бұрын
I have a ps3 and I bought mine in Canada and I am having problems with a couple of Blu-ray movies that won't load but plays all of my DVDs and most Blu-ray movies and it plays all of my games without a problem and the one of the Blu-ray movies that didn't load and can't play well I got that movie to load and was playing and then it paused and didn't do anything please let me know what I can do to fix this problem thank you
@MrMario2011
5 ай бұрын
Try to update your CFW, your console AACS keys might be outdated.
@chrisohrling149
5 ай бұрын
@@MrMario2011 ok where do I go to do that and I would need the Internet to do this
@estevezjaques9483
Жыл бұрын
I accidentally set the region to Oceania and now my tv says Input not Supported
@sharky13003
11 ай бұрын
Thank you, very helpful video
@MrMario2011
11 ай бұрын
You are welcome!
@john005_
11 ай бұрын
I wonder if there is a way to rip a pal bluray and somewhat reencode and or convert to a ntsc as to be able to play it on the ps3 bluray.
@MrMario2011
11 ай бұрын
You would do that on a PC with BD ripping software.
@1rk3neditz
Жыл бұрын
Perfect for my Malcom in the middle pal dvds
@gaming_musics
4 ай бұрын
this method is work with ps1 games ???
@gamesarelegends3473
8 ай бұрын
where does Star_App_Home come from and why isnt my PS§ showing Multiman EXE?
@robonintendo
Жыл бұрын
Will this allow people to play Persona 4 Arena out of region? It's pretty much the only region locked ps3 game.
@samharpershow
Жыл бұрын
I did everything just like u said now I'm in safe mode and it's says data is corrupted! ...
@Silcaria
Жыл бұрын
Regarding the input combo for toggling QA, mine doesn't seem to work. Debug settings is already there however right below my network settings before I even do anything. Dunno if it's because I installed Hen prior to installing Cobra and messed up my settings somehow as a result. Either way, I reinstalled the 4.90 firmware and I'll be doing a fresh install of Cobra tomorrow in order to try out downgrading my firmware again. One last thing. Changing the region from NSTC to PAL on Webman did work and the changes stayed post reboot (with Cobra mind you) but my blurays just keep black screening right before getting into the disc's menu.
@MrMario2011
Жыл бұрын
The best way to verify Toggle QA in that regard is to open up Rebug Toolbox and make sure that Toggle QA is set to Enabled in there.
@Silcaria
Жыл бұрын
@@MrMario2011 Doing a fresh install of everything on top tracking down and downloading the exact firmware that you showcase in the video did allow me to fully downgrade my system and enable me to directly change my region from there. However, my PAL blurays now give me the "wrong region warning" whenever I try playing them which I was actually able to bypass with Webman Mod. No clue why it's now worse with Rebug and QA enabled. EDIT: So reinstalling Webman Mod and changing the region to PAL on there WHILST ALSO having PAL selected in my Rebug settings finally did the trick. Thanks for the vid mate. You've saved me 100$.
@timdark9282
10 ай бұрын
I have now tried this on a CECHA12 and it didn't work, but it did work on A00. So it doesnt work on all A revisons
@MrMario2011
10 ай бұрын
Thanks for sharing!
@timdark9282
10 ай бұрын
@MrMario2011 wiki talks about a blu-ray region switcher. I quote Copy the patch files to /dev_hdd0/game/LV2000000/USRDIR and use LV2 Patcher to select the patch to use. Reboot to return to original state. Reference: ps3mrenigma blog export Any ideas on how to do this ?
@JFV00
Жыл бұрын
I have a PAL PS3 with HEN 4.90, want to watch some NTSC DVDs I have. Neither MultiMan or WebMan work. What can I do?
@MrMario2011
Жыл бұрын
If methods 1 and 2 don't work, you need CFW.
@Dexiz117
Жыл бұрын
small doubt, is needed to do this to play backups from other regions?
@MrMario2011
Жыл бұрын
PS3 games are region free, PS1 and PS2 games should play out of region already on a jailbroken console. Although if you're trying to do this for PAL/NTSC differences, I haven't tested that yet.
@bit4795
Жыл бұрын
Don’t change your region from debug settings it might break some functions or not let you play retail games
@YouTubeTV-rx4ck
Жыл бұрын
So from where then?
@ParanoidThalyyMVS
Жыл бұрын
Is this true? Could you provide a source for your information?
@YouTubeTV-rx4ck
Жыл бұрын
@@ParanoidThalyyMVS I'm not sure if that's even true at all because I have a Japanese region and made PS3 which whenever Ive done an update, shows the region from the US and I change it back to the Japanese region. No problems and everything has been working fine. If for online games having the Japanese region puts me in a server somewhere in Japan/Asia, then I change it to USA to avoid problems such as lag. high ping and etc.
@ParanoidThalyyMVS
Жыл бұрын
@@KZitemTV-rx4ck i'm sorry, i'm not sure I understand what you meant... Is this related to DVDs and, the rebug settings doing some damage to the system?
@YouTubeTV-rx4ck
Жыл бұрын
@@ParanoidThalyyMVS Correct, I don't know how true that is, the rebug settings doing some damage to the system as I've never had any problem or damage to the system changing the region.
@michaelvoulgarellis8298
Жыл бұрын
i have jailbreaked properly using EVILNAT over a HEN system. I see all the jailbreak functions, package manager, custom firmware tools etc but whenevwer i install apps, multiman or the habib toggle, there are nowhere to be found. i cant see them appear on the screen
@michaelvoulgarellis8298
Жыл бұрын
just for some background, my ps3 is a PAL european system. i tried first to make it a HEN system, it went well, i installed multiman, all appeared well, changed my region settings to US but never able to play an NTSC DVD. i then tried the CFW option (over the now HEN system), jailbreaked with EVILNAT, no errors, all well. i then tried to reinstall multiman, got a message that it already exists, i reinstalled anyways, but i cant see the app on the screen. Same with Habib toggle. shows that it installs properly but still nowhere to be found. I cant see any of the installed homebrew
@MrMario2011
Жыл бұрын
They're definitely going to be in the Game column.
@michaelvoulgarellis8298
Жыл бұрын
@@MrMario2011 you were right. found it.!! However although i eventually managed to downgrade, followed all steps through debug settings, changed the region to north america, still my NTSC dvds dont play. As a matter of fact it seems that i can play the PAL DVD, whatever the region i chose, but not NTSC... like it sticks to my original PS3 PAL, region, whatever i chose...btw, i have also noticed the ¨fake other region¨ which i also tried turning it on but still the same...no region change
@N68dodgeboy
Жыл бұрын
One quick question about this, if I do this, will this allow me to use NTSC-U PS2 and PS1 discs on a backwards compatible Japanese PS3? I know the video is about movies in particular, but does it change the backwards compatibility region for ps2 and ps1 games or would I have to do something else to do that?
@MrMario2011
Жыл бұрын
A modified PS3 should allow for region free playback of PS1 and PS2 games? But if there's a further issue with it, like PAL or NTSC display, I'm sure this would help.
@N68dodgeboy
Жыл бұрын
@@MrMario2011 Ah okay, thank-you for the response. So when I get a CFW (which I haven't done yet due to bgtools being unusable at the moment) it will just automatically remove the region restrictions for backwards compatible discs? I have a fat model Japanese PS3
@BackLogH3ro
Жыл бұрын
@@MrMario2011 I have a similar question. I want to play NTSC PS1 Games on my PAL PS3 Slim. While HEN and Multiman will allow me to do this?
@thedragonofdojima4157
Жыл бұрын
@@BackLogH3ro yes.
@pixellart6589
Жыл бұрын
Hi, I am exactly in the same situation but I still don't have a clear answer since we have to wait that bgtoolset work again...
@ocm_
Жыл бұрын
I have an Pal PS3 Fat CECHC03, it's region locked for PS1 and PS2 american games, with this would I be able to play them? I haven't modded the console yet since I got it recently.
@MrMario2011
Жыл бұрын
One person here said it worked for their PS1 games, at least worth a shot.
@ocm_
10 ай бұрын
@@MrMario2011it worked! Only thing I'm having issues it's with one game in particular: Crazy Taxi. It's a PS2 game on the CD format with the blue bottom. ¿Can you change the CD region as well with multiman?
@TalaIsDarker
7 күн бұрын
My ps3 isnt modded at all. Can I still do any of this?
@MrMario2011
7 күн бұрын
Title
@TalaIsDarker
7 күн бұрын
@@MrMario2011 Thanks.
@Long_Gone
3 күн бұрын
Thank u man 🌹
@MrMario2011
3 күн бұрын
No problem 👍
@metalcoremarc
Жыл бұрын
Just out of interest have a ntsc j (im in pal region) backwards compatiable ps3 phat. Has ylod but if successful in repairing. Is this applicable for pal ps2 and ps1 games? As have been told being ntsc j console i cant play pal ps2/ps1 gamediscs in it? (the main reason in wanting a bc ps3). Is that correct? If so can cfw change this like this bluray/dvd region vid?
@MrMario2011
Жыл бұрын
I'm sure it would help? Haven't tried it for PS1 or PS2 games myself.
@metalcoremarc
Жыл бұрын
@@MrMario2011 Thanks for the reply :) I guess better make sure i can fix it first and go from there haha.
@davidgrice9270
11 ай бұрын
Does this work for ps1 games
@p1k4x
9 ай бұрын
Have A PAL super slim. Doesn’t seem possible to play region 1/us with hen…
@MrMario2011
9 ай бұрын
Time for CFW if possible!
@soggypotato
Жыл бұрын
Forgive my tiny little brain... So if I've understood this correctly, I have an unmodified ps3, bought in EU (I live in sweden). So if I want to watch movies from america I have to install ps3hen, and then say multiman and it should be good to go? I'm a bit confused because I've been poking around to find out if I can play blu rays from wherever, and some people say there is no region lock on the ps3 so I don't have to do anything, and some say there is a region lock. I kinda just want a simple answer "yes you have to do this" or "no you don't have to" before I start doing anything. Partly because I'm lazy and don't want to do anything unless I have to, and partly because knowing me I'll probably mess it up somehow :P
@MrMario2011
Жыл бұрын
PS3 games are region free for playing, movie watching is not. Step through each method to see which one works, which is why I outlined 3 and put them in order from least dramatic to most dramatic.
@soggypotato
Жыл бұрын
@@MrMario2011 ok neatos, I'm gonna try it then, thanks
@meme-qb1lc
Жыл бұрын
does this apply to games
@Holoj3di
Ай бұрын
CAN I play pal ps1 game on my ps3 fat?
@MrMario2011
Ай бұрын
You can already do that on a modified system to my knowledge.
@jaredwilson5505
Жыл бұрын
Just a minute is a region free yeah you’re right let’s better get move on then
@rfigueroa1247
Жыл бұрын
What about for games?
@skylineXpert
Жыл бұрын
Having a copy of nfs carbon marked as region 1. Bought the 2nd gen ps3 PAL when GT5 came out. Will it play without problems or should i go on ebay looking for a UK version?
@JKSmith-qs2ii
Жыл бұрын
Thank god, just imported Godzilla from the criterion collection but they would not play on a PAL PS3.
@davidmcdonnell2598
Жыл бұрын
So a PAL PS3 with PS3HEN installed can play NTSC blurays?
@MrMario2011
Жыл бұрын
Give it a shot!
@davidmcdonnell2598
Жыл бұрын
@@MrMario2011 Which version is best and where can I download it?
@fred5882
10 ай бұрын
So is this still not working to play PAL content on NTSC?
@MrMario2011
10 ай бұрын
Watch the video
@fred5882
10 ай бұрын
@@MrMario2011 hi! I wasn't clear enough. With PS3Hen* so I have a NTSC console, no CFW possible. I watched the video. Thanks for answering btw
@juniorguirola9017
Жыл бұрын
good video 👍
@adamrutka3766
Ай бұрын
thanks!
@MrMario2011
Ай бұрын
No problem!
@pcguy5491-the-modern-retro-man
10 ай бұрын
I wonder why there isn't 4.90 REX yet?
@MrMario2011
10 ай бұрын
EVILNAT is the main firmware now. Even Joonie, the person behind the last few PS3 Rebug firmwares, has said that the latest EVILNAT is what folks should use due to it being updated over Rebug. Joonie has also assisted with EVILNAT development!
@pcguy5491-the-modern-retro-man
10 ай бұрын
@@MrMario2011 yet evilnat didn't include the region free protocol fro BD/DVDs...oh well...what I was thinking is downgrading that PS3 slim launch model now too so it can be region free for DVDs and Blu-rays too.
@logannosleep5
8 ай бұрын
@@pcguy5491-the-modern-retro-manis there anyway to add it. I did method 1 on Japanese PS3 but I still get wrong region code for DVDs.
@tryksta7247
Жыл бұрын
Is there any way to make my PlayStation 3 region-free without having to figure out how to get so e complicated new firmware or jailbreak? This is of no use to me and I'm trying to play a Blu-ray from Germany on a Region 1 PS3.
@MrMario2011
Жыл бұрын
Sadly nope.
@gamesarelegends3473
8 ай бұрын
I thought this was a cheap solution to watch US and Asian Movies in Europe, so now I have enough I am buying an expensive 300EUR Multi Region BluRay Player because of those stupid companies... I hate when I follow every small detail exact step by step and it still dont work. And you will never know why it wont work as a non hacker. Did "forgot" to make a check, did I used the wrong firmware or jailbreak file, did I have the wrong console setting, is the order of installation wrong. I dont know. I installed Hen like he did in the othere Videos. I did it two times like he showed. He said dont worry as long as it starts, it was a success. The second time I booted my PS3 was freezed in the background theme without XMB Menu. I forced to restart, it repaired itself. After all this stress Star_App_Whatever wont show up at the games XMB section. There is no EXE with HEN and the logo. When I try to Install Multiman it shows the USB drive but not Multiman so I can install it. I dont know what to do at this point...
@MrMario2011
8 ай бұрын
Not sure what to tell you? I covered in the video 3 possible ways, the final way is the best way and that's using the CFW approach. You're using HEN.
@gamesarelegends3473
8 ай бұрын
@@MrMario2011 its not your fault, to be clear. I will try something different tomorrow. Some KZitem Videos say you have to somehow activate the Jailbreak before you can install Hen. So what I was installing was not Hen, but two drivers when I am right. The strange thing is, when the internet is right, I have to activate the hacked console via PSN for Sony. What a paradoxon. But I will create an second account and try it. At this moment it couldnt get worse.
@dannydai1
Жыл бұрын
first 2 methods total dont help.
@MrMario2011
Жыл бұрын
The third method is overall the best option. As I said, the first two might or might not work depending on your setup.
@pathynes4835
Жыл бұрын
so this is pretty crazy on 4.9 the toggle menu doesnt show up to show if QA flag is toggled. you can check it in the custom firmware tools up top so i did. it was enabled...fuck it ill just install rebug. system went black installing. had to flick the power switch. figured it was bricked. nope turned it on and it installed rebug correctly. playing with fire downgrading on 4.9 but shit it worked so thanks for the video friend!
@jasonstone1496
Жыл бұрын
Thank you, this works great. I ran into an issue where I couldn’t proceed loading PS3updat.pup. I kept getting an error code. it turned out that I could not install the system update (downgrade for to rebug) because both my USB ports were occupied with one port charging my controller, and the other port with the USB drive. Once I unplugged my charger cable, the error stopped happening, and the system was able to detect and install rebug. When trying to install the update in recovery mode, the console just stated that the ps3updat.pup wasn’t applicable, so I went back to the regular system update function in the XMB and once my charger was unplugged, the update worked smoothly.
Пікірлер: 179