Hey everybody: before you comment that this isn't working, it only works on 13-16, according to the video owner.
@apicoruna3032
5 жыл бұрын
hi! sir, what is the ideal CO2 setting for I installed a double gun MiVV canister? THanks. Is it recommendable to change the CO2 setting after installing an aftermarket pipe? Thanks
@Christiaan405
2 жыл бұрын
I’ve tried this on my 2017 plate MTO9, but it doesn’t seem to work? I’ve pushed down both buttons for about 20secondes, doesn’t seem to work.
@WH05_SHORTY
2 жыл бұрын
Same here
@nicomav.7872
2 жыл бұрын
how do i know the right setting for mt09 2016 euro 3 with akrapovic racing full exhaust system
@john-mt93
2 жыл бұрын
Why we change co2;
@FoiMal123
4 жыл бұрын
So if you do this you'll need no remapping or to get a ECU ? if you put a new exhaust
@ShiteLines
4 жыл бұрын
It only works ok pre 15 or 16 bikes. Anything older you can't do this and it involves a remap. I'd personally recommend a remap anyway, it's worth every penny
@FoiMal123
4 жыл бұрын
@@ShiteLines Yes, but just to be clear, this basically eliminates problems that a no remap could cause right?
@arbro4427
5 жыл бұрын
I have evo rapid system om my mt09 2015. And it also have a akrapovic system. My co is 0 . Do i need to adjust it?
@rezekiyo
5 жыл бұрын
Bro my bike with stock exhaust is running hot. Used to hv Akra pipe on. But hv since changed to stock exhaust and it is running hot. Can i know what setting for stock exhaust
@ShiteLines
5 жыл бұрын
Should just be 0 across all 3 M8. that's what mines was.
@rezekiyo
5 жыл бұрын
@@ShiteLines Thanks a million bro
@gjkMN
4 жыл бұрын
@lainetmcvlog I've got a 2014, just got it. It has an M4 exhaust (no cat) and power commander. Is the CO adjustment still recommended even with a power commander?
@jamier8244
6 жыл бұрын
Great vid..Mines a 2015 with titanium Akrapovic underneath.I keep the baffle in always..do I need to change these settings also ?
@ShiteLines
6 жыл бұрын
I'm not sure the 15s have the option but I'd have thought the answer to that would be yes due to it being an aftermarket akra.
@jamier8244
6 жыл бұрын
@@ShiteLines I just checked..Yes it does have the settings and they are all 3 cylinders set to 0
@ShiteLines
6 жыл бұрын
@@jamier8244 try them all on 14 mate
@shukrijai7783
5 жыл бұрын
LaineYMCVlog hi I can’t seem to get into the mode - I’m using 2018. Is there a different mode entry ? Or Yamaha had removed the function? Thanks
@ShiteLines
5 жыл бұрын
@@shukrijai7783 you can't do it on newer models.
@MrUrquhartl06
3 жыл бұрын
I have a 2015 MT-09 with a full Decat & baffle removed scorpion system, it pops and bangs like nuts will this help to control this without a remap ??
@ShiteLines
3 жыл бұрын
It might improve it mate. Go into the menu and take note of what they're all set to then change them and see if you notice a difference. If you don't. Just set them back
@Roy_Godiksen
5 жыл бұрын
doesn't work on my European 2019 MT-09. Don't know if it's the model, that it's a European model (Euro4 regulations and all) or something else.
@ShiteLines
5 жыл бұрын
No it doesn't. 2013 to 2016 only.
@keeswassenaar
5 жыл бұрын
I have the same problem :( The only way to change it is to add a new map to the ECU
@vourkosdude
6 жыл бұрын
I have an xjr and all cylinders are all over the place. From -7 to +16. What is the correct number? Is this changing the mix? Can I go richer for the summer? Thanx!
@ShiteLines
6 жыл бұрын
vourkosdude 0 should be default. 14 for akra pipe (or better free flowing exhaust full system) or 17 if you have an exhaust and custom air filter.
@nickpayne1558
3 жыл бұрын
Hi, does anybody know how to do the adjustments on the tracer 900 gt. The GT does not have the two buttons but uses the wheel to scroll through the options but I cannot find a combination to access the Co2 settings.
@ShiteLines
3 жыл бұрын
You're in luck. The bike I've owned the last 2 years is a 2019 tracer GT haha. You can't. It can only be done on the computer. You shouldn't have a need to do this. I've had a scorpion full system (with no cat) on my bike with no issues and have just gone back to the original exhaust. The O2 sensor seems to adjust the fuel mixtures well. You're only option to get it absolutely perfect is to take it to someone that can Dyno it, sort your fueling and get your bike flashed with the woolich racing flash. It will make a night and day differene.
@nickpayne1558
3 жыл бұрын
Thanks for the reply, just fitted a full decat Black Widow system hopefully the Co2 sensor will compensate for the new exhaust.
@dvsv88u
6 жыл бұрын
Would you do this after installing an akropovic carbon full system exhaust without running a piggy back fuel commander?
@ShiteLines
6 жыл бұрын
dvsv88u yup
@dvsv88u
6 жыл бұрын
LaineYMCVlog awesome thanks. Just fitted the akra carbon full system set to +14. Runs sweet. Smoother and cooler now. Cheers
@willybaldsirhenry
4 жыл бұрын
dvsv88u and what about your fuel consumption?
@derekholms6171
4 жыл бұрын
Why doesn't the that work for me? I hold it down and regular screen
@ShiteLines
4 жыл бұрын
what year is your bike. It only works on 13-16 as far as i'm aware.
@derekholms6171
4 жыл бұрын
That's why. Mines a 2019
@joseescobar9505
6 жыл бұрын
will that work on a XSR 900?
@ShiteLines
6 жыл бұрын
jose escobar I'm not sure mate I'd expect so as it's very similar and made off the same range but don't quote me on it.
@rnclucas
5 жыл бұрын
I have the same issue.
@ravenshield56
4 жыл бұрын
My 2019 doesn’t seem to have this? Did they lock it behind some dealer code, or did they remove it from the ECU for the newer models?
@audiolover
2 жыл бұрын
They removed possibility to change this
@johnquizon4965
5 жыл бұрын
Hello men how about mt09 2018 model ?
@ShiteLines
5 жыл бұрын
Hi mate. No you can't do it on the 18 models
@itsretlig
6 жыл бұрын
This doesn’t seem to work on my 2016 MT09. I checked the kill switch, had both buttons down and turned ignition on, but nothing appears. Tried for up to 20 sec too. Perhaps I’m doing something wrong
@ShiteLines
6 жыл бұрын
itsretlig does your model have traction control?
@itsretlig
6 жыл бұрын
LaineYMCVlog yes it does
@anthonycawston5228
6 жыл бұрын
Mine won’t do it?!? 2016 TC model
@blah012345678
6 жыл бұрын
2016 and up don't have this anymore. Yamaha took it out. You have to use a ODB2 scanner with a Yamaha cable and Yamaha software
@TheHooliganJeansOfficial
5 жыл бұрын
@@blah012345678 that sounds expensive
@rnclucas
5 жыл бұрын
Nice but it doesent work with my xsr900. Any advice on how can i do it?
@ShiteLines
5 жыл бұрын
Models over 16 I believe you're unable to do this. It can only be done via getting the bike flashed with the Woolwich race flash and they'll correct your air fuel ratio. Trust me when I say this, getting your bike flashed and remapped will completely change it for the better. The difference it makes is outstanding. 6 months after I uploaded this video I sold my MT for a GS. Biggest mistake of my life. I now have a Tracer GT 2019. It's bloody incredible.
@rnclucas
5 жыл бұрын
@@ShiteLines Ty man
@Chris_Floroskoufis
3 жыл бұрын
@@ShiteLines I tried to do it in tracer 900 2019 but without success. What's wrong with the 2018 and later models?
@ShiteLines
3 жыл бұрын
Pre 2017 only
@ShiteLines
3 жыл бұрын
@@Chris_Floroskoufis Yamaha have locked them down so you can't mess with them anymore. Basically it forces you to go to a dealer
@AllInOneCz
5 жыл бұрын
Who is CO2? Thx
@Robertbruceb
5 жыл бұрын
Maybe thinner air at higher elevation, needs more or less then sea level, just guessing
@bogdantanase4089
6 жыл бұрын
What is this setting for ?
@ShiteLines
6 жыл бұрын
Bogdan Tanase MT09 with custom exhaust.
@makiatzu3628
4 жыл бұрын
Can i or do i need to do it after i flash my bikes ecu?
@sandmac67
7 жыл бұрын
where is the 4th cylinder? oh thats right you only have 3 lol ride safely m8
@ShiteLines
7 жыл бұрын
sandmac67 the fourth doesn't matter 😂
@MeowTown433
5 жыл бұрын
Lol the fourth to big
@johnkopek7979
4 жыл бұрын
More torque 3 cylinder....u really need to drive 170mph? Or if ur in europe 280 something kph?...idk
Пікірлер: 67