⚠ Attention! This video contains a mistake: 10:42 - the tightening torque is 40 Nm, not 63 Nm. We're sorry for the inconvenience.
@MrMattman087
Жыл бұрын
Great video/ work love how the centre retain bolt pushes of the old cv joint 👌
@autodocuk
Жыл бұрын
Thanks for your feedback! Please clarify or rephrase your question.
@tonomatias4199
Жыл бұрын
You are THE MASTER CHIEFTAIN I was very wondering how the bolt pushes the C. V. Joint ¡Bravo!
@autodocuk
Жыл бұрын
Thank you for your feedback! We are pleased to know that our video was helpful for you.
@vf3d
3 жыл бұрын
Epic video. I need to replace my CV joints.
@autodocuk
3 жыл бұрын
We are glad to know that our video was useful for you. AUTODOC
@goranekstrom708
Жыл бұрын
Note that in this video everything is nicely greased and comes loose easily, in reality not. The top pinch bolt is usually stuck and requires a press or hammer to get out, get a new one, you will need it. Second, I recommend getting an original VAG CV boot, the ones supplied are usually cheap and soft rubbery plastic. Third, when fitting the new joint on the drive shaft, make sure it is secured correctly over the C-shape locking spring.
@autodocuk
Жыл бұрын
We cannot show you all the nuances and problems when replacing, it is all individual and not always possible to solve them at home. In order to avoid this, we always recommend that replacements are carried out by a specialized service.
@goranekstrom708
Жыл бұрын
I understand that, I am not here to shame you.
@sebrura
4 ай бұрын
Thanks, I'm about to do this and have seen vids of how insanely hard that top bolt is to get out. But is it neccessary? I've seen others change outer CV joint without loosening any control arm bolts.
@goranekstrom708
4 ай бұрын
@@sebruraAFAIK it is not possible to replace it without loosening control arms, you will not get it out of the knuckle.
@raymondhogan8758
5 ай бұрын
Great job so helpful
@adonispuscas
Жыл бұрын
Hi, there are still a few mistakes regarding the tightening torque. According to Audi the torque for brake caliper carrier is 125 Nm (NOT 75 Nm) and for the drive axel: M14 bolt: 115 Nm + 1/2 turn (180º) or M16 bolt: 190 Nm + 1/2 turn (180º) (NOT 175 Nm).
@sale1004
3 ай бұрын
I got the answer before I asked, thank you ! 👍👍👍
@MhammedMsabbeh
Жыл бұрын
Thanks
@TheSifting80
Ай бұрын
Great video 👍
@JoshuaLBatterson
2 жыл бұрын
Great Video Guys! Im about to do these on my S4 B5 and this is a great tutorial for the diyers
@autodocuk
2 жыл бұрын
We are glad that you enjoy our work!
@mustafamechanic1094
3 жыл бұрын
Nice job it's easy
@chrisgraf4469
11 ай бұрын
that was waaay easier than the way I did it nice.
@autodocuk
11 ай бұрын
Thank you for sharing your opinion with us.
@sambishop8853
2 жыл бұрын
Like that top bolt always comes out like that lol 😂
@autodocuk
2 жыл бұрын
Unfortunately, it is difficult to say anything, we recommend contacting the service. AUTODOC
@chrisgraf4469
11 ай бұрын
One part I find easier is to remove the axle shroud on the block and pull the whole axle without touching the suspension. Old suspension parts are the easiest to break, everything else is kept oiled by the leaks:p
@autodocuk
11 ай бұрын
We're sure your comment will be helpful to many of our viewers.
@slavwaifu5300
3 жыл бұрын
its funny cuz my cv joint started making weird noises 2days ago and i got this video in my recommended section :D
@autodocuk
3 жыл бұрын
Thank you very much for your feedback. We are glad that our video was useful to you. AUTODOC
@autodocuk
3 жыл бұрын
Thank you very much for your feedback. We are glad that our video was useful to you. AUTODOC
@vf3d
3 жыл бұрын
They made this video for you personally! ;)
@mannine99
2 жыл бұрын
i need to change it too. not so long ago i have wheel alignment done so i dont want to loosen any suspension joints, luckily B5 driveshaft can be taken out without suspension disassembly. im using best quality löbro cv joint from autodoc
@autodocuk
2 жыл бұрын
Your comments are very important for us. AUTODOC
@jaferessop4412
2 жыл бұрын
Awesome thanks
@autodocuk
2 жыл бұрын
Thanks for your positive comment! Stay with us!
@candycane8409
Жыл бұрын
Where can I get a cv joint for the audi a4 2.0 2005. It is non Turbo. Please help me.
@javidgunraj1500
Жыл бұрын
Is this same On b6 a4?
@autodocuk
Жыл бұрын
In general, the replacement will be similar, the only thing that may be slightly different is the design features of your car. More accurate information can be obtained in the technical documentation for the car or by contacting the service.
@frozenwitcher
Жыл бұрын
I do not agree with that 63Nm to the nut from hell. The manual says 40Nm. Otherwise very accurate, but there is other way to replace the joint considering the fact that the bolt doesnt come out on most of the Audis.
@autodocuk
Жыл бұрын
Yes, you are right, it will be useful for us. Thanks for your attention.
@borutgoli840
20 күн бұрын
this is not the right procedure. you dont disasemble arms. you remove shaft on the other side
@autodocuk
19 күн бұрын
This video is for informational purposes only and does not guarantee a specific result. It is recommended to entrust the installation to highly qualified specialists to ensure the best results.
Пікірлер: 41