I was able to fix my forks thank you this video was very helpful
@ktmmojo3313
4 жыл бұрын
Thank you for taking the time to do this video. I have the same bike and need to do the same thing so watching this tells me I can do it without any special tools.
@ktmmojo3313
4 жыл бұрын
Curious as to how you got the old seal out? Having difficulty getting mine out.
@ktmmojo3313
4 жыл бұрын
Got it, just needed a beefier screw driver.
@franklincycles7462
4 жыл бұрын
Some times you can heat the outside of the fork with a heat gun or a propane torch
@williammealer3724
3 жыл бұрын
Good video but you didn't show how you removed the fork seal from the lower fork. You showed taking out the dust seal but I didn't see how you removed the fork seal.
@mustardmoving1885
Жыл бұрын
The whole reason i watched the video was for that missing moment. SMH.
@bobleishman7215
6 ай бұрын
Good video. Thank You
@lrs9911
2 жыл бұрын
The forks appear to be just like my sons 06 kx65. Thanks for the info
@franklincycles7462
2 жыл бұрын
Yes, very similar depending on the year of your bike
@dahatchery
2 жыл бұрын
Great video! It was very helpful. I just did our crf70. Try however to minimize Ah, ah, ah ,ah! Other then that outstanding!
@franklincycles7462
2 жыл бұрын
Thanks for the input, though I only did these videos with my son’s for fun, I am a more hands on guy than a broadcaster...lol thanks
@PoppaWheelies
3 жыл бұрын
Great video ! Thanks for taking the time to explain
@franklincycles7462
3 жыл бұрын
No problem, just having fun working on bikes with my son, glad u enjoyed it, ty
@apexdisco
3 жыл бұрын
Excellent video. Thank you!
@Xatos1337
2 жыл бұрын
Excellent video and well-made. Thanks!
@franklincycles7462
2 жыл бұрын
Thanks it was fun
@williammealer3724
3 жыл бұрын
Never mind. I saw in the comment below that you used a big flat head screwdriver. Thanks for the video...
@franklincycles7462
3 жыл бұрын
U could also use a large flat tire iron
@matthewmcqueary9057
2 жыл бұрын
Good video. But you never see how to remove the old seal. Sometimes that is the hard part. And the importance of not scaring the seal seat area . ..
@franklincycles7462
2 жыл бұрын
I had someone else who asked to, I think I had responded in an earlier message. There are a few types of tools u could use, a large flat screwdriver or a tire iron. Once the upper leg is removed from the lower tube, u just pry it up by using the top of the lower tube. . Thanks for your question
@BaldGuyRedTie
3 жыл бұрын
Thanks for making this video!
@franklincycles7462
3 жыл бұрын
No problem, did this with my son to have fun
@DanielTojcic
4 жыл бұрын
Great channel. Did you get injured riding?
@franklincycles7462
4 жыл бұрын
No, I was born with cerebral palsy, but have been riding for 40yrs, mx, road bike, drag Harley, plan on racing at unadilla mx rewind vintage race next year
@DanielTojcic
4 жыл бұрын
Franklin Cycles Gotcha! I look forward to more videos, and good luck at Unadilla next year
@franklincycles7462
4 жыл бұрын
Thanks
@DarkHour_YT-nt4mc
3 жыл бұрын
Can u show where u ordered the parts from and do u think it would be the same for a xr70r instead of a crf70
@franklincycles7462
3 жыл бұрын
I get my parts from my Canadian bike suppliers , they only sell to bike shops
@damarcuz1
Жыл бұрын
Xr70 an crf70 are the same bike
@jordanprater8603
4 жыл бұрын
What did you use to get your seals out?
@franklincycles7462
4 жыл бұрын
I used a big flat screwdriver, you just need to be careful not to scratch the inside of the fork. You can also use a tire iron, they work well too
@sebasroy
4 жыл бұрын
there is no more oil in there hehe its everywhere on the bike
@franklincycles7462
4 жыл бұрын
Seb Roy I wanted it to leak from the forks into the engine so I would have to change the motor oil... lol
@chrisjollylikestofilm
3 жыл бұрын
You didn’t show us how to take the seals out ......
@franklincycles7462
3 жыл бұрын
I think I mentioned it in the comments , but if u didn’t see it I will tell you, you use either a a tire iron or a fat screwdriver to pry the out, ty
Пікірлер: 36