A torque wrench IS required to remove the glow plugs as this excellent video shows: 3:15 This is because the glow plugs are quite weak and will simply snap off if they are very tight (Corroded in) and you try too hard... If you just try to force them loose you will snap them clean off and your engine will be ruined!...If the plugs resist the maximum 16 Nm torque....STOP!!!. ..You should then soak the plugs in penetrating type oil overnight and then run the engine to full temperature before attempting another removal using the torque wrench
@autodocuk
Жыл бұрын
We are sure that your comment will be useful for many of our viewers.
@narrrold
Жыл бұрын
I was always taught to never remove anything with a torque wrench as it will put the calibration out of whack
@meckanicall
Жыл бұрын
@@narrrold Not if the wrench has a reverse turn capability. many good quality ones can tighten (or loosen anti-clockwise) and still give the torque value or signal the torque limit.
@KatieBrown-z4r
7 ай бұрын
I'm grateful for your comment before I tried to tackle this job as a novice on my A3. Thank you ❤
@Chris-jl6vk
7 ай бұрын
what oil ?
@LA_Native
2 жыл бұрын
Thanks for the B7 videos! Are you guys planning on doing an oil pan anytime soon? Asking for a friend 👀 lol
@finleythornton332
2 жыл бұрын
Lovely video ☺️
@TakeTaxiUK
2 жыл бұрын
THANKS 👍😊
@feedyoursoul5642
10 ай бұрын
Big like 🤝 very helpful video
@danieltenorio2109
2 жыл бұрын
WE LOVE B7! BUT I have the north American version but is the engine the same? or different? I have a 2.5L Thank you for uploading this videos :) cheers
@autodocuk
2 жыл бұрын
Thanks for your positive comment! Stay with us!
@elzrinja365
2 жыл бұрын
Why do you put ceramic grease on the body of glow plug, but dont on the threads of glow plug?
@autodocuk
2 жыл бұрын
Thank you for the valuable clarification, for our viewers it will be very useful information.
@user-pg4yl5uz4l
6 ай бұрын
Thought the same. Zero sense.
@Sandeep-carz
Жыл бұрын
After run how much kilometre we need to replace glow plugs?? I have b7 passat
@Chris-jl6vk
7 ай бұрын
Hi mate, is it better to remove glow plugs with a hot, cold or warm engine ? thanks in advance
@autodocuk
7 ай бұрын
It is better to remove glow plugs on a cold engine.
@seriosuly84
7 ай бұрын
I noticed some of the caps are broken on my glow plugs. Do I have to replace whole harness? They work but saw when I did other work.
@autodocuk
7 ай бұрын
It is necessary to replace the wiring of the glow plugs; if the caps are broken, problems may arise when starting the car in sub-zero weather.
@futurespacepirate83
2 жыл бұрын
How long are the long nose pliers please? 11 inches / 0.28m / 28cm? Cheers 🍻
@man2524
2 жыл бұрын
where is the fuel filter in a passat cc 3.6? from 2010 year model
@cajger8354
4 ай бұрын
Hi guys,need a piece of advice I you could.Need to change the glowing plugs but there are different types and most importantly length types. How do I know what length do I need without removing old one and measuring it?
@autodocuk
4 ай бұрын
To answer your question, we need more data about your car. Contact our Customer support team and we will definitely try to answer your question. Our Customer Support team is always ready to help you to find compatible car parts fot your car and you can get in touch with us via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact AUTODOC
@cajger8354
4 ай бұрын
My car is VW Passat b7 2011,2.0 tdi 103 kw
@radiator1979
Жыл бұрын
What brand of glow plugs do you recomend to buy?
@autodocuk
Жыл бұрын
Please contact our Customer Support team and we will be able to assist you with your request AUTODOC
@ezekielchariot
2 жыл бұрын
Why would you use a torque wrench set to the supposed tighten up setting to undo the plugs ?, clearly on the first plug, the wrench clicked on its torque limit and you had to exceed this point to undo the plug anyway so how is that different to just undoing with a normal socket wrench with careful pressure having first applied some WD40? They have to come out anyway.
@autodocuk
2 жыл бұрын
Thank you for your comment. We understand that mistakes were made during the replacement, and in the future, we will try not to allow this to happen again. AUTODOC
@meckanicall
Жыл бұрын
A torque wrench IS required because the glow plugs are quite weak and will simply snap off if they are very tight (Corroded in) and you try too hard... If you just try to force them loose you will snap them clean off and your engine will be ruined!...If the plugs resist the maximum 16 Nm torque....STOP!!!. ..You should then soak the plugs in oil overnight and then run the engine to full temperature before attempting another removal using the torque wrench...
@TakeTaxiUK
2 жыл бұрын
Is the Electrical Spray and Brake cleaner same thing? 😅
@autodocuk
2 жыл бұрын
These are two different concepts, each purifier has a different systems maintenance group. AUTODOC
@iliaszaagougui5035
2 жыл бұрын
Why don't you clean the shaft first with a reamer?
@autodocuk
2 жыл бұрын
Thanks for the clarification, we will take that into account in the next videos.
@videazciestxiaomi70mai92
10 ай бұрын
nenatieraju sa nahodo zavity ?
@autodocuk
10 ай бұрын
You can purchase this lubricant at the following link: www.autodoc.co.uk/liqui-moly/9589029?search=LIQUI%20MOLY%20High%20Temperature%20Lubricant%20(3381)
@jetta_ua
2 жыл бұрын
🚘🚘🚘🔥🔥🔥👍🏼👍🏼👍🏼
@구독자-q2h
2 жыл бұрын
gool
@cotyluckett
Жыл бұрын
Why are you loosening glow plugs with a torque wrench 🤣🤣🤣🤣🤣
@meckanicall
Жыл бұрын
A torque wrench IS required because the glow plugs are quite weak and will simply snap off if they are very tight (Corroded in) and you try too hard... If you just try to force them loose you will snap them clean off and your engine will be ruined!...If the plugs resist the maximum 16 Nm torque....STOP!!!. ..You should then soak the plugs in oil overnight and then run the engine to full temperature before attempting another removal using the torque wrench
@Mod-rw9cw
10 ай бұрын
That’s you right back in your fools house.Always think before you speak 🤪
@Chris-jl6vk
7 ай бұрын
Hi mate, is it better to remove glow plugs with a hot, cold or warm engine ? thanks in advance @@meckanicall
Пікірлер: 43