*****HELP***** We need to get 1000 subscribers in order to continue making videos!!! Please consider Subscribing!!! Thanks, The Wipps Family of Five
@maximilianosoto5170
4 жыл бұрын
Hello, my friend, I'm Marvin. I am writing to you from Tijuana, Mexico. I have been watching your video on how to change the oil to a John deere 125 automatic 100 series. connect the red and yellow wires of the component that is above the oil filter that would help me a lot, thanks in advance. greetings and take care of your family of the covid-19
@kristinboll7623
6 жыл бұрын
I am newly divorced and needed to learn how to change the oil in the riding lawn mower as I've never done it before. This video has been extremely helpful, thank you!
@TommyTester
5 жыл бұрын
FYI: The proper way to pour oil is with the nozzle on top. That way air can enter the bottle as the oil pours out.
@perf5th
3 жыл бұрын
Thanks for the vid! I have had my 125 for 15 years and it is still running strong 💪 💪
@trevhb
5 жыл бұрын
Never use the wrench to tighten the filter just use your hands
@chad6900
4 жыл бұрын
Thanks, im gonna give this a go. Ive never been good at do it yourself stuff, but you made it easy to follow.
@pennyminkkinen7201
2 жыл бұрын
This is a fantastic video, very clear explanations. Greetings from Australia
@G56AG
4 жыл бұрын
I notice you are wearing latex gloves in the video, a very important point is that latex and petroleum products don't get along. Petroleum products like oil actually attack latex, a demo I was shown when I got in the chemical business, they took a latex glove, blew it up some and tied it off, then put one tiny drop of oil on it, 3-4 minutes later the glove failed. Nitrile gloves work much better and don't fall apart on your hands when doing an oil change. It was previously mentioned that oil filters should only be tightened hand tight. I use a much better filter, a Purolator L10241 $6.99 at Advance Auto Parts. The JD filter and that Fram only have a TINY filtering element in them, that Purolator has a substantially larger filter on the inside where it counts.
@rainiedaz3465
3 жыл бұрын
Thank you! Will be attempting to service my old John Deere that my husband has neglected. Hope it’s not too late.
@ETXYardSolutions
22 күн бұрын
Blame game huh
@richardbowers3647
5 жыл бұрын
Maintain everything! This posting was helpful for me to plan the task! Thanks!
@weejane1
7 жыл бұрын
Great video! Very clear, easy to follow instructions.
@TheWippsFamilyOfFive
7 жыл бұрын
Thanks!!! Glad it was easy!!!
@martinschulz9381
2 жыл бұрын
Good video. In the commercial engine world, Fram is the running joke, but I have heard that their small engine filters are not the same junk as their automotive filters.
@boomertsm
2 жыл бұрын
This must be the first time you did this! After a few oil changes, it'll only take you a couple of minutes to do all of what you've been doing for 20 minutes.
@HA-gs7tq
Ай бұрын
Thanks
@newtron9
2 жыл бұрын
Make sure inside of oil drain cap is also wiped clean to help avoid leakage that could occur after refilling. Also use the correct Mfg's instructions on how much to tighten filter after gasket contact, and of course, check the oil level on seated dipstick TWICE, once after initial refill and next after engine warm up. thanx
@cat_daddy
3 жыл бұрын
I don't know about that particular filter but generally speaking Fram's are not highly regarded
@johnkatkus7143
4 жыл бұрын
I am new to the John Deere D125 and thanks for the video. I will check to see what is new as I am the person doing all of the maintenance. Have a great day. By the way, I did some research on the oil filter that you used and that was not considered the first choice. Just my opinion that I am passing on.
@jondewitt441
3 жыл бұрын
What is the best filter then?
@sharkpedal
2 жыл бұрын
someone told me about Kydex…i molded a u-shaped piece to fit under the oil filter to guide the oil from the filter into the catch pan
@febeleven
6 жыл бұрын
Awesome video... you are so neat/clean, I think I can do this.
@TheWippsFamilyOfFive
6 жыл бұрын
Thanks!!! Glad that we helped you.
@mikehunt4465
11 ай бұрын
Nice
@skylermorrison5092
3 жыл бұрын
Can I please have the kind of filter u used and good job in the video
@maximilianosoto5170
4 жыл бұрын
Hello, my friend, I'm Marvin. I am writing to you from Tijuana, Mexico. I have been watching your video on how to change the oil to a John deere 125 automatic 100 series. connect the red and yellow wires of the component that is above the oil filter that would help me a lot, thanks in advance. greetings and take care of your family of the covid-19
@jackblack2044
7 жыл бұрын
wow Damn it looks like hot tar...... Long overdue for an oil change.
@eddiewebb7025
Жыл бұрын
Underneath the oil filter is where you need that piece of ice cream bucket cause that is where your mess is going to be
@tomcard8342
4 жыл бұрын
Nice video. However, why did you keep referring to the oil you were draining as “stuff”?
@tomn5880
7 жыл бұрын
I suggest a small pressure washer to clean your engine prior to doing the oil work. Since you will already have the washer hooked up, wash it down again after your finished.
@TheWippsFamilyOfFive
7 жыл бұрын
ok thanks!!!
@richardbowers3647
5 жыл бұрын
Caution on engine wash. - - Scan the proper engine parts to wash 1st & avoid electrical as well as hidden parts of the engine when cleaning. .
@istonemind
6 жыл бұрын
where did you get the oil filter wrench?
@TheWippsFamilyOfFive
6 жыл бұрын
You can get them at walmart, amazon, or auto parts stores. Thanks for commenting.
@Gunnr1236
5 жыл бұрын
Harbor Freight sells a set of multiple sizes
@thomasglandon5078
2 жыл бұрын
hand tight only for oil filter
@christianprouzat-ju7ps
Жыл бұрын
Explication en français serait le bienvenu
@ArchGBUStanton
3 жыл бұрын
Thanks for the video, very helpful. However, my OCD won't allow me to sleep tonight knowing their's a dang shopping cart across the yard. Can I retrieve that and take it back to the store? LOL
@TheWippsFamilyOfFive
3 жыл бұрын
Ha! That's an old recycling bin from the garbage company, not a shopping cart. You can now rest easy.
@ArchGBUStanton
3 жыл бұрын
@@TheWippsFamilyOfFive LOL I thought it really seemed out of place at a nice neighborhood. Thanks for relieving my (made-up) anxiety.
@Jimmyzb36
5 жыл бұрын
Thanks for the video!!!!!! However,,,, I would NEVER change the oil with the super nice coat / jacket that you wore to do yours.
@icecreamcheesesticks
2 жыл бұрын
Don’t ever use a 3rd party oil filter for John Deere mowers people or you’ll destroy the compression relief on your engine. Always use genuine John Deere filters
@joshuamead1577
3 жыл бұрын
You should always use the old oil to lubricate the oil filter, and NEVER use the wrench to install the oil filter! Should always be hand tightened.
@dannymotovlogs4254
3 жыл бұрын
Could explain why?
@jondewitt441
3 жыл бұрын
@@dannymotovlogs4254 you can over tighten a filter by using a wrench! Always hand tighten
@sptrader6316
3 жыл бұрын
I would never put old oil on a new filter gasket. I always prefill the oil filter too, even if it's a sideways mount. The oil filter will absorb most of the oil in the filter material and will help lube the engine faster on startup, even if you spill a few drops, no big deal.
@wd8779
2 жыл бұрын
Why old oil and not new oil.
@pnkflyd66
4 жыл бұрын
That oil was thick and black. Use full synthetic.
@susdad
3 жыл бұрын
God forbid oil touches the grass
@jeffreydevoti7000
3 жыл бұрын
Complex tax lack that should bee left of your genuine JD service mechanics guys authorities real made parts & oil.
@denniskillmon769
Жыл бұрын
After contact to the mounting surface...the OIL FILTER... should NEVER be tightened more than 1/4 to 1/2 a turn. Small engines... I'll stick with 1/4. If you've ever had one stuck you know exactly what I'm getting at.
Пікірлер: 52