Excellent. Not many people go by the book anymore. Thanks for the refresher course.
@caseingersolltractorsnortheast
Жыл бұрын
Thanks and you are welcome. Thanks for watching and taking the time to comment!
@t.j.h2810
Жыл бұрын
Your the best "Case" man on u-tube without a doubt, I've seen all the others !!...Great tips and knowledge you share.
@caseingersolltractorsnortheast
Жыл бұрын
Thanks!!! Appreciate that very much! Thanks for watching and the comment!
@johnb5837
Жыл бұрын
Very cool that detail and professional control me at every point thanks bunches John Bryan Winchester Indiana, Fan
@caseingersolltractorsnortheast
Жыл бұрын
Thanks! Appreciate the comment and thanks for watching!
@Ajaxaxxess
11 ай бұрын
Thank you, have a K532 I have to replace the points on, figured it was under the flywheel! Glad to find your informative video. TY
@caseingersolltractorsnortheast
11 ай бұрын
You are welcome and thanks for watching!
@bubbapaul8026
2 жыл бұрын
Very informative! Thanks for sharing
@caseingersolltractorsnortheast
2 жыл бұрын
Glad it was helpful! You are welcome and thanks for the comment and support!
@diesel_dude08
2 жыл бұрын
Great video sir 👍🏼! Thank you for making!
@caseingersolltractorsnortheast
2 жыл бұрын
Thanks! And you are most welcome!
@otiscoldren7238
Жыл бұрын
Great video!
@caseingersolltractorsnortheast
Жыл бұрын
Thanks!!
@larrytepfer848
7 ай бұрын
Good morning I am working on a kohler 17hp series 2 engine model KT17S Spec 24304 , how can I determine what year it was made ?
@caseingersolltractorsnortheast
7 ай бұрын
Hi going to have to look up serial numbers or codes, Google should lead in the right direction or a chart..thanks
@fordinlinestraight
Жыл бұрын
How long does the points stay closed in relation to the flywheel marks. Answer to my question Adding on to question! what I was asking is! the cam that open and closes the points the peak of the is at 90* of the rotation points are now fully open turn 90 * again and the are fully close and the cam is ilon the flattest spot. At this point u can gauge for the dwell. A multi meter set to continuity help pinpoint first not contact.
@t.j.h2810
Жыл бұрын
Just a nano-second 😄
@caseingersolltractorsnortheast
8 ай бұрын
Hi sorry somehow missed this question some how. So with single cylinder small engines timing is set with the point gap. We have a video on how to time small engines. This should help if I understand what you are looking for lol kzitem.info/news/bejne/yJd9m5-noV-Hen4si=jyrMeT4lLhxotbXz
@cyclebuster
2 ай бұрын
my kohler will not run unless the point gap is .004 anything wider and it runs backwards
@caseingersolltractorsnortheast
2 ай бұрын
Hi, think your measurements are off, need to figure out what's wrong. Are using oem points? New feeler gauges? Maybe the plunger is wrong? Flywheel key or cam issue? New oem condenser? Thanks for watching and the comment.
@cyclebuster
2 ай бұрын
@@caseingersolltractorsnortheast I have been a mechanic my whole life never seen anything like it
@caseingersolltractorsnortheast
2 ай бұрын
@@cyclebuster We always see new stuff. Always the challenge and "fun" lol. I would confirm and check what I mentioned above. Good Luck
@jasonconklin8172
Жыл бұрын
Got same engine can rod get to vial with crustys to come bk with points ?
@caseingersolltractorsnortheast
Жыл бұрын
Hi not sure what you ar asking here, need more info. Thanks
Пікірлер: 28