Our fire alarm kept going off and the monitoring center was no help. I searched and found this video. Saved us countless hours of annoyance and now we know how to test the sensitivity and clean the detector so it is in functional range. Also, the tip on aligning the arrow and the bump saved another call or two. Thank you!
@canarynoir2874
3 жыл бұрын
oh my gosh! I just got off the phone with ADT and they had no clue how to help me remount it after changing the batteries! And a few years ago, I had a technician come out and he was sweating it for awhile too until he finally got it up. I decided to try the arrow/notch trick and it popped right in and is working perfectly!! THANK YOU!!
@ultrasuede7757
Жыл бұрын
THANK YOU, THANK YOU, THANK YOU!!! This video was very well done, extremely instructive, and most of all, it showed me, finally, why I couldn't get the battery compartment door to close properly. You are AWESOME for making this wonderful video.
@Galen-mx6hm
6 ай бұрын
Thank you for your video with clear instructions.
@513Blacklion
Жыл бұрын
My smoke detector had a constant red light after changing the batteries. There was a comment in here to hold the test/silence button for 2 seconds with the batteries removed and that FINALLY made it work! Also your guide on lining it up helped too. Thanks!
@CorbettK42
5 жыл бұрын
Thanks you saved my grandmother a lot of hardship
@shirleybenedict8539
5 жыл бұрын
Our 360 Security company lead us to your video last night as our smoke detector would NOT register properly. Took us over an hour to get success. Thanks so much!!
@Eizy019
5 жыл бұрын
I had no clue on how to do this. This video is amazing. All done!!
@course_videos1948
8 жыл бұрын
Thank you. Thank you Thank you Thank you! Sick 3 year old, and 'System Tampered' alarm all night after replacing batteries is not a good combination for sanity. You have just saved me from going mad! (No where does it mention anywhere other than here about lining up those arrows so it is mounted back properly!) Thank you.
@sarahjbradford6819
3 жыл бұрын
Thank you for the clear and simple instructions. Very thorough !!!!! Reattaching the smoke alarm was easy after I watched your video.
@TheRock1961rock
3 жыл бұрын
Thanks so much- my problem was getting cover back on! Got it!
@CASHES87
6 жыл бұрын
Thank you for this video, it helped, considering nothing came with instructions for us.
@Andrea-qk7gi
4 жыл бұрын
Thank you! So professional, perfect speed, all explained! Thank you!
@lyung1548
2 жыл бұрын
Thank you. I was so aggravated. This was incredibly helpful
@Black63thunder
8 жыл бұрын
Another Thank you. There's no telling how much money you just saved me.
@cb333333
9 жыл бұрын
Excellent instruction. Thanks very much Gary
@caseyherman5441
6 жыл бұрын
Thanks, Steve! Excellent video and tutorial.
@benoithoule4100
5 жыл бұрын
Thank you !! You saved my sanity !!
@mindbodyintegration2023
8 жыл бұрын
Thank you! So very helpful.
@ajohn3556
4 жыл бұрын
Thank you for a very instructive video. Will the device continue to show a blinking red light?
@paulcecere230
3 жыл бұрын
very help full and easey
@moeomoton520
4 жыл бұрын
Spot on, thank you so much!
@worldabove2
6 жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍My SAniTy has returned! 👍👍👍👍👍👍👍 Thank You!!
@conleylowrance5963
Жыл бұрын
I did this and replaced the batteries with brand new ones. However, my system still shows low battery for this detector. Is there anything you need to do after installing the new batteries to reset the low battery code?
@marysaxon5831
4 жыл бұрын
What do you do if new batteries are in, attached correctly but keeps on chirping.
@tanya5916
3 жыл бұрын
After replacing batteries, if not re-attached to the base, should the 3 beep signal keep going off?
@SuperBardley
7 жыл бұрын
I have a NX491NT/60-848-02 (very similar to the one you are covering), that I purchased for use with our old Simon system, and am interested if it is compatible with a more modern ADT panel. Is it?
@berentsenct4968
3 жыл бұрын
What kind op preparations do I take iot shut down tehe system rior to change batteries?
@burtbeavers9513
2 жыл бұрын
Gotta find the arrow!
@vicdhillon7723
5 жыл бұрын
What's difference between CR123A and CR123 batteries?
@Myalarmcenter
5 жыл бұрын
Hi Vic, they are functionally the same -- CR123 is made by Sony, and CR123 by Panasonic
@vicdhillon7723
5 жыл бұрын
@@Myalarmcenter Thank you!
@derekisthematrix
2 жыл бұрын
Anyone know why mine reports an intermittent tamper? I checked battery voltage, checked sensitivity, opened it up to clean it as shown in the video (mine was very clean). After putting it back up I get an "End of Tamper" notification but then hours later it will start back up again?
@MrJazzinman
7 жыл бұрын
Might need to leave batteries out for 2 minuets and then press button for a second or two before putting batteries back in. My concord system kept saying low battery until I did that.
@FIRED13
6 жыл бұрын
This aligns with my research that pressing the device's reset/silent button for a few seconds drains the internal capacitor, which effectively clears 'old' device status with the panel (brains of the system). So, it is recommended to ALWAYS hold this button for a few seconds BEFORE putting the batteries back in.
@Roomba27
6 жыл бұрын
We have ReadyHome and we have GE smoke and co alarms coo
@MaryBrace
3 жыл бұрын
How can these manufacturers justify blasting people with high decibel "change battery" warnings that cause hearing damage? Unfortunately, because I had to try to deal with this at 5:30am, I can't find the battery cover, and can't screw it back on.
@jeffreyr8618
7 жыл бұрын
I have that smoke detector
@sirownzalotgaming3025
4 жыл бұрын
I hate this fucking smoke detector. I already did all this shit
@sirownzalotgaming3025
4 жыл бұрын
I did everything. I changed batteries. It gave me 5 flashes. And it cherps like every 30-60 seconds
Пікірлер: 40