Do you prefer the older or newer style of Popsocket?
@mtoldroyd
2 жыл бұрын
I like the older kind because I could put a steel disc inside the cap, which then sticks to my magnetic dash board mount. New one doesn't allow to remove cap, so I can't put my steel disc inside to make magnetic mount stick to the pop socket itself. I saw another DIY video where they stick the steel disc on OUTSIDE the cap, but that covers up the design. I don't like that. So now I'm supposed to get all new dashboard mounting systems? Lame.
@maryluuluu
2 жыл бұрын
@@mtoldroyd iii
@LisaSweet
Жыл бұрын
The older design with the notches is much better and easier to deal with.
@mariacarmichael4969
Жыл бұрын
Older design way better!! I just bought 6 from Amazon w interchangeable tops and two broke the first time I turned them to remove the disk one popped the entire disk out the other wouldn’t turn at all! Both were unbelievably high priced for a badly manufactured product! I am livid!!! I def miss the old style much more! They were a lot easier in lotsa ways!
@haugrachel
Жыл бұрын
Have you seen anywhere online that still sells the older style of the popsockets?
@kaspianepps7946
Жыл бұрын
Thanks for this. I watched an official popsocket video on how to do it and couldn't get it to work. With your explanation it worked instantly.
@thethriftychickadee7245
11 ай бұрын
I had no idea I could do this ... just bought a new one for my new phone but actually liked the one I had on my old phone better, so pretty nice, now I have two I can interchange. Thank you so much!
@theacademyisntt
4 ай бұрын
This was super helpful. I remember seeing that these were swappable but couldn't figure out how and had some really nice ones laying around that I'm now able to reuse 😊
@ieatkindergarteners
Жыл бұрын
So you’re telling me, I just broke my pop socket because I’m stupid and didn’t look up how? Sounds like me! (Thanks for telling me how, won’t break it again
@candyflosskitten23
7 күн бұрын
Thanks for this mine broke but was able to unscrew it without needing to rip the base off my phone case! ☺️
@alyxgraff9121
11 ай бұрын
Thank you so much. I had no idea you had to screw off the top of a Popsocket to change it out. This helped me so much.
@saraleblanc2853
Жыл бұрын
thank you! looked all over their website for this tutorial to use mag charging on a new case
@ShotgunsAndSalt
2 ай бұрын
Thanks this worked a treat
@TheMahiika
5 ай бұрын
Thanks for the vid, just watched it with my kid, who wanted to change new popsocket..we turned waaayyyyy too much first✌️😅
@ErinRenee1990
Жыл бұрын
Thank you I just got a swappable pop socket and had no idea how it worked.
@cutecats532
4 ай бұрын
Thank you. The top on mine was ripping I needed to swap it.
@LiliShine4927
4 ай бұрын
Omg. Ty it was so easy.!!!!!! It’s my first pop socket…. Yay…!!! Ty Ty Ty
@infinitegh0st879
8 ай бұрын
Thank you so much! This helped me a lot! I’ve been struggling for 10 minutes before I came across your video!
@RobSomeKnowledge
7 ай бұрын
Glad I could help!!
@marisaramil478
3 ай бұрын
Thank you! More helpful than the tutorial by Popsocket
@blainejasmin
Жыл бұрын
Just purchased a new Popcase for my iPhone. This video helped a lot, thanks!
@Thespacehouse-er4zr
3 ай бұрын
This helped so much
@mtoldroyd
2 жыл бұрын
I like the older kind because I could put a steel disc inside the cap, which then sticks to my magnetic dash board mount. New one doesn't allow to remove cap, so I can't put my steel disc inside to make magnetic mount stick to the pop socket itself. I saw another DIY video where they stick the steel disc on OUTSIDE the cap, but that covers up the design. I don't like that. So now I'm supposed to get all new dashboard mounting systems? Lame.
@haugrachel
Жыл бұрын
I totally agree!!!
@wendyrector1455
6 ай бұрын
You are great! So simple so easy now that I know how to LOL
@Thecrazychannel-gy8ms
5 ай бұрын
This helped so much I been wanting to know how to change it for months 😂
@mkhere433
Жыл бұрын
Thank you so much! My phone fell from my pop socket, but I knew it wasn't broken since I didn't see a shingle crack! If I didn't find this video I would have brought a new one
@RobSomeKnowledge
Жыл бұрын
Always glad to help people save money!
@AllieKlu
Жыл бұрын
I never would have figured this out. Thanks!
@user-ne5ij9mj7r
Жыл бұрын
Changing the top isn’t easy. I broke 2 just trying to change the top. I like the old design better!!
@RobSomeKnowledge
Жыл бұрын
How exactly are you breaking them? Are you trying to just pull it off without it being unlocked from the base fully?
@withelisa
Жыл бұрын
@@RobSomeKnowledge I just broke my beautiful pricier new one too, super upset rn 😢 It breaks when you pull instead of push
@RobSomeKnowledge
Жыл бұрын
What do you mean when you pull? When trying to get it to unlock? I say to push down on the video
@larissaneto1533
11 ай бұрын
I just broke my old one as well lol
@larissaneto1533
11 ай бұрын
Just found out why! My old one was a different model, that’s why this truck didn’t work . The new one I got was very easy to switch the top bc it’s a newer model and has the 90 degree option
@reiivory
5 ай бұрын
Thank you this was super helpful!😊
@jenniferbrook1720
Ай бұрын
Thank you!
@MA-qz5ww
Жыл бұрын
I wish I would have watched this before breaking the one on my phone lol but at least the new one is safe 😅
@melaniemitchell9419
Жыл бұрын
Same 🤣
@Barbie_All_The_Way
3 ай бұрын
Wow. I didn't know you could do that. Cool
@Ceirawong
Жыл бұрын
Thank you so so so so much I just realised it was that easy
@CharismaSpencer
Ай бұрын
Thank you 🙏🏻
@robertshawiv1513
8 ай бұрын
That was easy, thank you! I like the newer one better. 👍🏻
@satsuki6009
Жыл бұрын
Thank you so much! Very helpful 😊
@halcynical
Жыл бұрын
Nice! I got a previous popsocket top that I want to use on my new popgrip. It actually worked ❤
@GeoLuchse
10 ай бұрын
Thanks a lot, you explained it very well!
@Nicolette_
7 ай бұрын
Very well explained!!!!
@alita09105
Жыл бұрын
What if the lid itself is removed from the collapsible silicone funnel part? Is my only option to glue it?
@djb5851
Жыл бұрын
That’s my problem too.
@THINKforYOURSELFinstead
10 ай бұрын
My metal-disk top, is separating from the rubber cone too. OP-asking about this 1-year ago, and still no answers or solutions? Anyone? Is the only option to glue it? Being only half off, I'm afraid to remove it, or even lift it more to peek.
@worldshoutmaria
11 ай бұрын
Thanks dude, you’re a lifesaver
@Drea_A
2 ай бұрын
Oh my God. THANK YOU
@thesisters9307
Жыл бұрын
That helped me out so much
@BethanyEvans3
9 ай бұрын
Very helpful thaaanks😁
@lauraliekay9431
9 ай бұрын
Thank you Rob
@arielsol444
Жыл бұрын
My top piece came off the base and I can't rotate it out of the base... any suggestions? I tried a tiny bit of oil to losen the stuck part but that didn't work.
@funwithfriends3649
Жыл бұрын
Thank you this was so helpful❤❤
@bengalblitz
3 ай бұрын
If you don’t put your pop socket in the middle of your phone, you’re a serial killer.
@RayHernandez-97
23 күн бұрын
Any tips on how to remove the spinning pop socket top? That one feels impossible for me
@RobSomeKnowledge
23 күн бұрын
Not sure which you’re talking about..?
@patriciaflaherty
Жыл бұрын
Great video! I've swapped my pop socket before, but forgot how. This was really helpful 😊.
@rickynix3886
Жыл бұрын
Same here 😂
@RobSomeKnowledge
Жыл бұрын
Hey it happens! You can’t remember everything! 💯
@Dave2DVlogs
Жыл бұрын
Thanks breh , I broke my other shnizz trying to pry it off like a bingbong head
@pinkkvelvet
Жыл бұрын
Thank you!!!
@michellechacontlallixco9169
Жыл бұрын
Very helpful! Thanks so much! I was getting ready to just pull it off. 😂
@RobSomeKnowledge
Жыл бұрын
Haha good thing ya didn’t. A lot of comments on this video are of people that are upset they didn’t look up the video before trying to just yank it off and now they got a broke one lol. Glad to help!
@auralangst6177
9 ай бұрын
It would help to mention if you rotate until the click means you have gone too far... the click is 180°..
@RobSomeKnowledge
9 ай бұрын
I mean I specifically say to only turn it 90 degrees , and show how to easily tell what is 90 degrees. So if you turn 90 degrees to click it in and 90 degrees to click it out, then it should be obvious that 180 degrees means you will be back where you started lol
@todaywasagoodday3511
Жыл бұрын
Very helpful thank you
@-30h-work-week
Жыл бұрын
Does anyone know when they changed the method of swapping the top? :) About when did this new version hit the market? Thanks.
@RobSomeKnowledge
Жыл бұрын
2018, if you need to swap the top on the older style, here is my video showing that. kzitem.info/news/bejne/roR3mpyGnaObZn4
@NarutoIsAwesome24
Жыл бұрын
*Thank* you! I was worried I was going to have to replace my fav popsocket for some new one lol
@RobSomeKnowledge
Жыл бұрын
Haha no problem! Glad it helped! Why were you going to replace it? Is it not sticking anymore?
@jdmes4586
9 ай бұрын
For those Magsafe popsockets, you need to twist 90 degrees anti-clockwise to remove the top rather than clockwise for some strange reason
@RobSomeKnowledge
9 ай бұрын
Hmmm interesting, thanks for the info! I haven’t used any of the MagSafe popsockets
@Shewasafairy09
Жыл бұрын
Omg your amazing. Thank you.
@padrey
4 ай бұрын
can you replace the new top with the old?
@RobSomeKnowledge
3 ай бұрын
If they are both swappable ones, yes
@leilaniaileenlove
Жыл бұрын
Doesn't work for me. Edit: I got it to work; I was twisting the wrong direction 😊
@RobSomeKnowledge
Жыл бұрын
Are you sure you have the newer Swappable popsocket, and is it a real one or a knockoff? The older ones don't have this feature, look right under the plate that has the popsocket design, do you see 4 little tabs that connect the design to the rubber expandable funnel part? If so you have an older style
@Kali07ish
Жыл бұрын
The little white part got stuck how do I fix that?
@RobSomeKnowledge
Жыл бұрын
Not sure which part you are talking about, mine doesn't have any white part
@KariSuttle
9 ай бұрын
I can't get it, the accordian just naturally pops up no matter how many times I try turning it 90 degrees. I can't get it on either the current popsocket on my phone or the new one I just opened. Both are swappable.
@RobSomeKnowledge
8 ай бұрын
The accordion pops up? Like expands? I’ve never heard of it doing this by itself, collapsing sure, but opening up?
@KariSuttle
8 ай бұрын
Yeah. My others ended up coming off just fine, but the Harry Potter one didn't. It's the enamel deathly hallows one. So maybe it's either the material or the specific line of them idk.@@RobSomeKnowledge
@RobSomeKnowledge
8 ай бұрын
Hmmm yeah that is really weird I’ve never heard that before
@anniezhang347
13 күн бұрын
it’s not working 😭
@soccer3508
Жыл бұрын
I have the older popsocket. And I just got it so I have a question. So can I remove the rubber part that is on it? Not the sticky part but the rubber thing that attaches to the top thing.
@RobSomeKnowledge
Жыл бұрын
Are you talking about the silicone funnel part? If so on the old ones yes this does come out. This video will kind of show you it disassembled for the older ones. How to Fix a Broken Popsocket kzitem.info/news/bejne/yKWL3KxmoIhzfaA
@RobSomeKnowledge
Жыл бұрын
Are you talking about the silicone funnel part? If so on the old ones yes this does come out. This video will kind of show you it disassembled for the older ones. How to Fix a Broken Popsocket kzitem.info/news/bejne/yKWL3KxmoIhzfaA
@marissaboggs8405
Жыл бұрын
@@RobSomeKnowledge 😅
@herneychienverneryia4020
20 күн бұрын
ty!
@ain4963
10 ай бұрын
Woaaah ahhshaha i did it open ittt 😂😂😂
@annettedicocco5027
Жыл бұрын
thanks again 🫶
@robo7643
Күн бұрын
I like the old way because you can use the top as storage 😂
@RobSomeKnowledge
Күн бұрын
Hahah yes!! I always kept a folded $100 bill in my old popsocket , in case of emergency and I don’t happen to have my wallet or something. Not many people mention this use hahahah.
@gretareimer838
3 ай бұрын
rip thought i broke it and threw it away
@ThatOneWeirdGal
Жыл бұрын
How is this easier? Mine literally doesn't turn...
@RobSomeKnowledge
Жыл бұрын
Are you pushing down and turning at the same time? If you are and it’s not turning it’s either broken or you probably have the older style popsocket that doesn’t have the swappable part built in
@ThatOneWeirdGal
Жыл бұрын
@@RobSomeKnowledge It's brand new. It is the new one that has no swatches on the side. I am pushing down and turning and it just doesn't turn.
@RobSomeKnowledge
Жыл бұрын
@@ThatOneWeirdGal Then you either most likely have a defective one, or a knock off maybe. Really weird
@evelynkeith-luzzi986
Жыл бұрын
@@RobSomeKnowledge I'm having the same problem. Grrrr
@xSk4nkHunt42x
Жыл бұрын
I can’t stand the new version, they are ALWAYS falling off
@RobSomeKnowledge
Жыл бұрын
I haven't had any problems, what kind of case/what material is your case made out of?
@Soapeater69000
Жыл бұрын
Didnt work HELP
@RobSomeKnowledge
Жыл бұрын
Are you sure you have the swappable popsocket? And not the older kind that isnt swappable?
@SonniDez
8 ай бұрын
I prefer the old style. I want to swap a different design onto a clear pop up part.
@joswahn
10 ай бұрын
Why is this video more than 30 seconds?
@RobSomeKnowledge
10 ай бұрын
Because its my channel...? LOL
@Deanlandeeon
10 ай бұрын
Didn't work
@RobSomeKnowledge
10 ай бұрын
Are you sure you have a newer swappable popsocket? The older style popsocket doesn't swap off like this
@phantomidols
Жыл бұрын
Am I just dumb or does putting it back on not work at all for me
@RobSomeKnowledge
Жыл бұрын
Are you pressing down and turning at the same time? This is required.
@phantomidols
Жыл бұрын
@@RobSomeKnowledge yeah, so I’m genuinely not sure what could be going wrong
@RobSomeKnowledge
Жыл бұрын
There are little indentations and tabs that stick out. One set on the base. One set on the piece that disconnects. Are the little round tabs that stick up, broken or worn down? That is how they catch and lock in place
@kyeosdior
4 ай бұрын
how the HELL is this EASY
@RobSomeKnowledge
4 ай бұрын
you literally push down and turn 90 degrees, idk how much more simple I can make it lol
@krystalthompson4013
11 ай бұрын
This did not help
@RobSomeKnowledge
11 ай бұрын
Then you probably don’t have a swappable popsocket, you probably have an older, original popsocket. This video below is for the older popsockets : kzitem.info/news/bejne/roR3mpyGnaObZn4si=1EFPnH2c6i1DqlO2
@3Moose666
Жыл бұрын
The new design is awful. Paper thin plastic for absolutely no reason. Broke 3 just trying to change the top.
@Dave2DVlogs
Жыл бұрын
U buying knockoffs? Cuz my shnizz solid af
@andreagarza8860
5 ай бұрын
thank you so much! I just realized that I broke my popsocket 🥲
@esaflaka9155
Жыл бұрын
Mine still won’t work 🥲🥲
@RobSomeKnowledge
Жыл бұрын
Are you sure you have the swappable kind? The old ones weren't swappable like this, check out this video and see if you have the 4 little tabs that I show and you can just pop the design top off of the rubber funnel part: kzitem.info/news/bejne/roR3mpyGnaObZn4
Пікірлер: 139