In this video, we show you how to Change the Circuit Board on a Paslode IM65 Nail Gun. Click here for a full list of parts, tools & transcript!
Parts:
Spare Parts for a Paslode IM65 Nail Gun:
Cylinder Head Circuit Board:
bit.ly/3FKxH1s
Screw (for circuit board):
bit.ly/3DyoI1C
Tools for a Paslode IM65 Nail Gun:
Bahco SL25 Socket Set:
bit.ly/3iZur8R
Web: www.lsengineers.co.uk/
Facebook: / lsengineers
Twitter: / ls_engineers
Instagram: /
Blog: www.lsengineers.co.uk/blog.ht...
Health & Safety Warning Please ensure that you have safely prepared the machine and work space. If you are unsure about any aspect of the task please seek professional advice.
Transcript
Today we're going to replace the cylinder head circuit board on a Paslode IM65 Nailer.
Remove the two screws from either side of the cap.
Remove the 4 shoulder screws using the provided Allen key.
You can now remove the cap.
Unplug the fan motor wires and spark wire.
Then remove the cylinder head by twisting.
(THIS IS PERSONAL PREFERENCE, CAN BE ACHIEVED KEEPING CYLINDER HEAD IN NAILER)
Using a star drive unscrew the screw that is holding the Cylinder Head Circuit Board into place.
You can now remove this part and replace it if necessary.
Tighten the Cylinder Head Circuit Board with the screw.
Place the cylinder head back into position if removed, along with the fan motor wire and spark wire.
Position the cap back over the cylinder head until flush.
Secure with the 6 screws.
That's how you replace the cylinder head circuit board on a Paslode IM65 Nailer.
If you have any issues, questions or would like to talk to our customer service team please visit our website. Please note L&S is a UK based trading company, please see our website for information on delivery to other countries.
Негізгі бет Тәжірибелік нұсқаулар және стиль How to Change the Cylinder Head Circuit Board on a Paslode IM65 Nail Gun | L&S Engineers
Пікірлер