Thank you so much for your detailed description of the process!!!
@iroybk
5 ай бұрын
You are so welcome!
@timothyfrollini5383
Ай бұрын
Oil filters can be bought at all auto parts stores. You receive everything in the box that you do from the dealership. At fraction of the cost!!!
@s.p.3886
3 ай бұрын
Thanks bud, helpful video.
@iroybk
3 ай бұрын
You're Welcome :)
@mscsm2946
Жыл бұрын
Note: I have the prestige hybrid sx it looks like they moved the oil rest to the following screen- Vehicle - Convenience - Oil Change Reminder
@iroybk
Жыл бұрын
Thanks for the update!
@catfish24
6 ай бұрын
Good job Great informative video. Thanks for posting.
@iroybk
6 ай бұрын
Glad it was helpful!
@catfish24
6 ай бұрын
Just had my wife's 2024 Kia sportage first oil changed at University Kia in Huntsville Alabama it was a complimentary first oil change before we got half way home from having the oil changed the oil light came on I pulled into a parking lot under a street light and checked the oil no oil on the dip stick the morons Either didn't put oil in it or didn't tighten the oil plug or the filter so I called the dealer and told them what the hell was going on and they had to send a roll back wreaker to pick it up and brought us a loner car so my advice is if you have your oil changed by some sparkey make sure to be careful driving home. Oh yea it is brand new with only 1968 miles on it i just hope it hasn't damaged the motor.
@iroybk
6 ай бұрын
That's just insane man, hope everything is alright we love our Kia.
@rdyfrrr5862
4 ай бұрын
Where did you lift the car exactly to place the jack stand? I am afraid to lift anywhere away from the notches of the pinch weld. If i use a jack lift, i am unable to place the jack stand.
@iroybk
4 ай бұрын
For lifting a 2023 Kia Sportage, aim as close to the pinch weld notches as possible. The area where the body folds and forms an edge is structurally sound for lifting. Ensure you're near the intended tire but lifting along that edge, close to the notches, should be safe for both lifting and placing your jack stand. Done this way multiple times without any issues. Always double-check the vehicle's manual for specific guidance and use a proper jack pad to protect the car's body.
@jeremylaws7010
10 ай бұрын
thanks dude!
@iroybk
10 ай бұрын
No problem!
@sunghyunyoon3803
10 ай бұрын
where & how can I get genuine kia oil filter?
@iroybk
10 ай бұрын
What you need to know is in the video's description. Let me know if you have any more questions.
@StuartNC
Жыл бұрын
I wonder what the chances are the dealer will actually replace the o’ring, crush washer, and reinstall the panel with all the clips. I’m not feeling optimistic.
@iroybk
Жыл бұрын
I know or a shop. Always feels good to do it myself and know all that was done. Especially now going 8k between changes.
@mccjoe01
Жыл бұрын
Im 60, and have been working on and building cars my whole life.....why am I nervous about doing this oil change?
@iroybk
Жыл бұрын
You got this!
@mccjoe01
Жыл бұрын
@@iroybk Thanks, it's over and the operation was a success.
@iroybk
Жыл бұрын
@@mccjoe01 I'm so glad!
@rawhenrnh
Жыл бұрын
I want to know if I'm understanding this correctly. I have a 23 Sportage and the coolant is below the low level line. I went through the manual and from my understanding I'm only supposed to top it off with distilled water? Is this correct? I even looked at the recommended lubricant page and it also says use distilled water
@iroybk
Жыл бұрын
yes I read the exact same thing
@mccjoe01
Жыл бұрын
Distilled water doesn't contain any minerals or chemicals that could cause corrosion. That's why it's recomended
@randyk7249
6 ай бұрын
When should u get first oil change says 8 to 10thousand 2023
@iroybk
5 ай бұрын
I've been doing 8,000
@ThresherXG
8 ай бұрын
Where can I get one of those clip tools?
@Mauricio-gb1je
7 ай бұрын
Your local auto parts store *autozone , orielys*
@iroybk
7 ай бұрын
@Mauricio-gb1je is correct, I got mine at Autozone
@ThresherXG
8 ай бұрын
Where did you put the jack stands?
@iroybk
7 ай бұрын
The jack stands were placed within the 2 notches mentioned at the first of the video. The official "lift points" if you will. I hope this makes sense, let me know if you have additional questions. There was room to jack as well as replace the jack with the stand in this area.
@ThresherXG
7 ай бұрын
@@iroybk Thanks! That answers the next question I had of how to jack it up and place the jack stands there lol. Are your jack stands have the kinda curved head? I think most do, I was wondering if the pinch weld fit on those kind well
@iroybk
7 ай бұрын
@@ThresherXG Mine are curved, I didn't have any issues.
@ThresherXG
7 ай бұрын
@@iroybk thanks!!
@williamsax5868
9 ай бұрын
Shouldn't post these videos if you can't include all the steps. The crush washer is important!
Пікірлер: 41