In this video, we show you how to change the ignition module on a Viking MB 253.1 T Lawn Mower w/ a Briggs and Stratton 625 Series Engine (serial no 09J02). Click here for a full list of parts, tools & transcript!
Parts:
All Parts for a Viking MB 253.1 T Lawn Mower:
bit.ly/2Oxi3Rp
Ignition Module:
bit.ly/3aO1Or0
Tools:
Bahco SL25 Socket Set of 25 Metric 1/4in Drive
bit.ly/2Szz4Ja
Web: www.lsengineers.co.uk/
Facebook: / lsengineers
Twitter: / ls_engineers
Instagram: /
Blog: www.lsengineers.co.uk/blog.ht...
Health & Safety Warning Please ensure that you have safely prepared the machine and work space. If you are unsure about any aspect of the task please seek professional advice.
Transcript
Today we are going to change the Ignition module or the Armature on a Briggs and Stratton 093j02 engine for a Viking MB 253.1 T Lawnmower.
Firstly remove the top cover using an 8mm socket.
Unplug the spark plug boot.
Release the stop wire.
Now remove the two screws using a 1/4” 6mm socket.
You can now release the ignition module.
Place the new ignition module into position and loosely tighten it with the screws so you can set the gap. (The gap should be .006 - .014 Inches (0.15-0.36mm) using a setting gauge.
Now the setting gauge is in place, tighten the screws, then remove the tool.
Return the stop wire and then secure the spark plug boot.
Then replace the cover and secure.
That's how you change the ignition module on a briggs and stratton engine for the Viking Lawn Mower.
If you have any issues, questions or would like to talk to our customer service team please visit our website. Please note L&S is a UK based trading company, please see our website for information on delivery to other countries.
Негізгі бет Тәжірибелік нұсқаулар және стиль How to Change the Ignition Module on a MB 253.1 T Viking Mower W/ Briggs 625 Series Engine | L&S
Пікірлер