I bought a couple of cheap escam cameras and have been unable to get them both onto my network at the same time. Even when I change the IP address of the first one away from the camera default , my router will not find the second camera when I connect it. If I then unplug the first camera, the network will find the second camera, but it will find it at the updated ip address of the first camera. Any ideas appreciated. Thanks.
@jugubitrus7295
4 жыл бұрын
I got an IP camera without IP address. Please help me
@user-mc7ez6lm4x
2 ай бұрын
It is not opioid switch, it is pronounced as "PeeOuYi" switch, or in English spelling notation: [pi: ou i:]
@vee8121
4 жыл бұрын
Will this method work with any IP Camera?
@maheshmadawala1851
4 жыл бұрын
Thanks
@jherdyparam
7 жыл бұрын
my dahua ip cam is connected directly to nvr, then the nvr is connected to the router lastly my pc is connected to the router. My queastion is can i use congfig tool to search the IP Camera on may network even the ip cam is directly connected to NVR? Can i also change the IP Address of the IP Camera directly in the config tool?
@2MTechnology
7 жыл бұрын
You will need to move the network cable from the NVR's NIC to one of the NVR's POE switch port. This way, when you run the config tool, you should be able to make changes to the cameras.
@jpol1439
6 жыл бұрын
You skpped a point. Why is it better to change the default and who does the default belong to? Sure do wish they would make these horrid cameras plug and play. Is it safer? Less safe?
@2MTechnology
6 жыл бұрын
It is better to change to default IP address, so you can assign static IP to the camera. This way, you can always get to the camera directly. Many times, you don't have plug-n-play scenerio.
@user-xp5oi6xm1m
6 жыл бұрын
I use ip cameras with my Xeoma software
@limajarilimajari4263
6 жыл бұрын
Why so complicted? If the ip.adress ipcam conflict with nvr, just connect yr nvr to monitor.. change netwirk configuration change the nvr ip adress with bundled software... done
@2MTechnology
6 жыл бұрын
This is just showing how to change the IP address stored on the camera, not the NVR itself. You're correct, it is easier to change the NVR NIC address, however that will only work under the condition that all cameras you are connecting to your NVR have the same IP address. If you have multiple cameras from different vendors, this will likely not be the case. When adding different camera brands to the same NVR, assigning the NIC address of the NVR to each camera is efficient.
@RiagaTech
11 жыл бұрын
Hi, where can I get that config tool? I have a wanswiew camera but have no way to see the deault Ip adress and have no way to modify it Tks
@2MTechnology
6 жыл бұрын
It's on our website: www.2mcctv.com
@jherdyparam
7 жыл бұрын
hi, we have 7 DH-IPC-HDW-1120S IP camera currently it is connected to DH-NVR-4108H-8P nvr, We have some issue on the 2 camera everytime i've restart the nvr, those 2 camera connected to the nvr does not display video on the nvr instead they show invalid password on their specific channel. So I need go to the settings on nvr particulary on remote device then edit the password. Then after editing the password the video will display properly. I need a permanent solutions so what do i need to do?
@2MTechnology
7 жыл бұрын
It sounds like you have changed the default password for these IP Cameras. I would recommend you change the camera or default the cameras back to factory. Since both NVR and IPC are both Dahua, set the channel back to plug-n-play. This will solve your problem
Пікірлер: 18